Marco Antonio Sánchez-Burgos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marco Antonio Sánchez-Burgos has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Pilar Mercader-Moyano
University of Seville
3 shared publications - Esperanza Conradi-Galnares
University of Seville
2 shared publications - Paula Porras-Pereira
University of Seville
2 shared publications - Aikaterini-Flora Trompeta
Research Lab of Advanced, Composite, Nano-Materials and Nanotechnology (R-NanoLab), Materials Science and Engineering Department, School of Chemical Engineering, National Technical University of Athens, 9 Heroon Polytechniou, 15773 Athens, Greece
1 shared publication - Begoña Blandón González
University of Seville
1 shared publication - Dimitrios A. Dragatogiannis
Department of Naval Architecture, University of West Attica, Ag. Spyridonos Str., 12243 Egaleo, Greece
1 shared publication
Latest Publications
- Open Access
Potential of CNT-Enhanced Steel-Reinforced Concrete to Reduce the Impact of Water Management Facilities
The growth of urban areas and climate change affect the performance of water management, increasing the rate of flooding and decreasing the quality of available water. To address this issue, the sustainable urban drainage systems (SUDs) and conventional urban drainage systems (UDIs) must be promoted. In both systems, grey infrastructure plays an important role, in the form of reinforced concrete tanks, filters, and water treatment plants. Nowadays, the use of reinforced concrete is a major contributor of the environmental impact of human activities environmental impacts. This study aims to assess the potential of nanoparticle-based concrete to mitigate the environmental impacts of water management facilities. To achieve this target, a comparative Life Cycle Assessment (LCA) analysis was performed on a multi walled carbon nanotubes (MWCNTs) based concrete, and a conventional one. To evaluate the corresponding benefits, a Functional Unit has been defined representing a frequently used element in water management facilities. The conducted review found no similar research. It is noted that the functional units used in published studies on nanoproducts are usually defined for the production of mass units. This study, found that using MWCNT-based concrete reduced the weight of the steel reinforcement by 47%. This reduction in steel outweighs the environmental impacts corresponding to used MWCNTs. The impact scores obtained are significantly lower for the MWCNT-based concrete. Therefore, the use of this material is recommended in Water management facilities, only on an environmental basis. Further investigation is recommended into the economic viability of this use.
Open AccessPotential of CNT-Enhanced Steel-Reinforced Concrete to Reduce the Impact of Water Management Facilities
The growth of urban areas and climate change affect the performance of water management, increasing the rate of flooding and decreasing the quality of available water. To address this issue, the sustainable urban drainage systems (SUDs) and conventional urban drainage systems (UDIs) must be promoted. In both systems, grey infrastructure plays an important role, in the form of reinforced concrete tanks, filters, and water treatment plants. Nowadays, the use of reinforced concrete is a major contributor of the environmental impact of human activities environmental impacts. This study aims to assess the potential of nanoparticle-based concrete to mitigate the environmental impacts of water management facilities. To achieve this target, a comparative Life Cycle Assessment (LCA) analysis was performed on a multi walled carbon nanotubes (MWCNTs) based concrete, and a conventional one. To evaluate the corresponding benefits, a Functional Unit has been defined representing a frequently used element in water management facilities. The conducted review found no similar research. It is noted that the functional units used in published studies on nanoproducts are usually defined for the production of mass units. This study, found that using MWCNT-based concrete reduced the weight of the steel reinforcement by 47%. This reduction in steel outweighs the environmental impacts corresponding to used MWCNTs. The impact scores obtained are significantly lower for the MWCNT-based concrete. Therefore, the use of this material is recommended in Water management facilities, only on an environmental basis. Further investigation is recommended into the economic viability of this use.
- Open Access
- 30 May 2025
- Published by MDPI AG in Construction Materials
- Vol. 5 (2) , 37
Comparative Analysis of Scientific Papers on LCA Applied to Nanoparticulated Building Materials
Nanomaterials have emerged as versatile components revolutionizing diverse industries, yet their environmental and health impacts remain insufficiently explored. This paper delves into the latent hazards accompanying their evolution and integration, particularly within the construction sector. It addresses the critical gap in assessing their life-cycle impacts, emphasizing the necessity of explicit reporting on nanoparticle emissions. Employing a Life Cycle Assessment (LCA) approach, this research evaluates the sustainability of nanomaterial applications. The absence of nanoparticle-specific data in existing product databases underscores the need for comprehensive life-cycle emission reporting. Since direct impact calculations remain unfeasible, incorporating predicted emissions and risk assessments into LCA studies is recommended. This study advocates for incorporating nanoparticle risk evaluations into LCA methodologies to enhance sustainability and environmental safety. By prioritizing precise emission data and predictive risk analysis, it advances nanomaterial environmental assessments, contributing to the responsible implementation of nanomaterials in construction.
- 30 May 2025
- Published by MDPI AG in Construction Materials
- Vol. 5 (2) , 37
Open AccessComparative Analysis of Scientific Papers on LCA Applied to Nanoparticulated Building Materials
Nanomaterials have emerged as versatile components revolutionizing diverse industries, yet their environmental and health impacts remain insufficiently explored. This paper delves into the latent hazards accompanying their evolution and integration, particularly within the construction sector. It addresses the critical gap in assessing their life-cycle impacts, emphasizing the necessity of explicit reporting on nanoparticle emissions. Employing a Life Cycle Assessment (LCA) approach, this research evaluates the sustainability of nanomaterial applications. The absence of nanoparticle-specific data in existing product databases underscores the need for comprehensive life-cycle emission reporting. Since direct impact calculations remain unfeasible, incorporating predicted emissions and risk assessments into LCA studies is recommended. This study advocates for incorporating nanoparticle risk evaluations into LCA methodologies to enhance sustainability and environmental safety. By prioritizing precise emission data and predictive risk analysis, it advances nanomaterial environmental assessments, contributing to the responsible implementation of nanomaterials in construction.
- Open Access
- 28 March 2025
- Published by Springer Nature
- p. 43-58
Life Cycle Assessment (LCA) Methodology
This third chapter meticulously articulates the Life Cycle Assessment methodology, providing a detailed exposition of the various phases inherent in the process, an exploration of diverse impact categories, and an overview of commonly utilized tools for LCA development. Additionally, the chapter sheds light on prevalent environmental certification standards. Furthermore, the chapter concludes by presenting insights into the application of this LCA methodology within the construction industry.
- 28 March 2025
- Published by Springer Nature
- p. 43-58
Open AccessLife Cycle Assessment (LCA) Methodology
This third chapter meticulously articulates the Life Cycle Assessment methodology, providing a detailed exposition of the various phases inherent in the process, an exploration of diverse impact categories, and an overview of commonly utilized tools for LCA development. Additionally, the chapter sheds light on prevalent environmental certification standards. Furthermore, the chapter concludes by presenting insights into the application of this LCA methodology within the construction industry.
- Open Access
- 28 March 2025
- Published by Springer Nature
- p. 111-124
Calculation of Life Cycle Assessment of Construction Products with Nanoparticles
This chapter meticulously undertakes a comprehensive Life Cycle Assessment of a product infused with nanoparticles. Each section within this chapter aligns with distinct phases of the methodology, encompassing the definition of study objectives and scope, development of an inventory detailing consumption and emissions, selection and quantification of environmental impact categories, and the subsequent interpretation of obtained results. The chapter concludes with the synthesis of findings, coupled with formulated recommendations for enhancing the integration of nanoparticles in the construction sector.
- 28 March 2025
- Published by Springer Nature
- p. 111-124
Open AccessCalculation of Life Cycle Assessment of Construction Products with Nanoparticles
This chapter meticulously undertakes a comprehensive Life Cycle Assessment of a product infused with nanoparticles. Each section within this chapter aligns with distinct phases of the methodology, encompassing the definition of study objectives and scope, development of an inventory detailing consumption and emissions, selection and quantification of environmental impact categories, and the subsequent interpretation of obtained results. The chapter concludes with the synthesis of findings, coupled with formulated recommendations for enhancing the integration of nanoparticles in the construction sector.
- Open Access
- 5 December 2023
- Published by Springer Nature in The International Journal of Life Cycle Assessment
- Vol. 29 (2) , 308-327
Comparative life cycle assessment of traditional timber jack arch slab refurbishment solutions: Eco-efficient proposal versus conventional ones
Purpose: In the context of worldwide efforts to reduce plastic waste, the authors of this document patented a cement mortar floor slab interjoist prefab vault incorporating recycled plastic. This piece was designed to be used for the refurbishment of Spanish traditional timber jack arch floor slabs. Taking into account nowadays context, it is essential to assess the environmental benefits of this product. Methods: A cradle to gate LCA has been performed following ISO 14044 and ISO 15804 recommendations. Thus, the aim of this research is both to provide a measure of the environmental improvement that this material adds to the building process and to compare it with current most used construction elements used for the same function. It is stressed that this study is based mainly on primary data obtained from Spanish producers. Results: The results obtained show that the reference scenario, corresponding to the new patented vault, is the system with lower impacts in six out of the seven categories assessed. Furthermore, when adding the LCA normalisation step, the conducted analysis show that for the most influential impact categories, GWP100a and AD fossil fuels, the reference scenario bears the lowest scores. Conclusions: It can be concluded that the new patented vault has a better environmental performance than the assessed commercial vaults. Therefore, in this research, the benefits for the construction sector to incorporate recycled plastics are shown. Furthermore, these results can encourage the research on construction products that include recycled plastics in their composition. Bearing in mind that this study assesses the impacts corresponding to the production of a prototype of the newly vault, it is considered that there is room for further improvement through the optimisation of the production process.
- 5 December 2023
- Published by Springer Nature in The International Journal of Life Cycle Assessment
- Vol. 29 (2) , 308-327
Open AccessComparative life cycle assessment of traditional timber jack arch slab refurbishment solutions: Eco-efficient proposal versus conventional ones
Purpose: In the context of worldwide efforts to reduce plastic waste, the authors of this document patented a cement mortar floor slab interjoist prefab vault incorporating recycled plastic. This piece was designed to be used for the refurbishment of Spanish traditional timber jack arch floor slabs. Taking into account nowadays context, it is essential to assess the environmental benefits of this product. Methods: A cradle to gate LCA has been performed following ISO 14044 and ISO 15804 recommendations. Thus, the aim of this research is both to provide a measure of the environmental improvement that this material adds to the building process and to compare it with current most used construction elements used for the same function. It is stressed that this study is based mainly on primary data obtained from Spanish producers. Results: The results obtained show that the reference scenario, corresponding to the new patented vault, is the system with lower impacts in six out of the seven categories assessed. Furthermore, when adding the LCA normalisation step, the conducted analysis show that for the most influential impact categories, GWP100a and AD fossil fuels, the reference scenario bears the lowest scores. Conclusions: It can be concluded that the new patented vault has a better environmental performance than the assessed commercial vaults. Therefore, in this research, the benefits for the construction sector to incorporate recycled plastics are shown. Furthermore, these results can encourage the research on construction products that include recycled plastics in their composition. Bearing in mind that this study assesses the impacts corresponding to the production of a prototype of the newly vault, it is considered that there is room for further improvement through the optimisation of the production process.