Tesfaye Barza Zema
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Tesfaye Barza Zema has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Subramani Raja
Department of Mechanical Engineering, Saveetha Engineering College, Thandalam, Chennai 602105, Tamil Nadu, India
3 shared publications Maher Ali Rusho
Masters of Engineering in Engineering Management, Lockheed Matin Engineering Management, University of Colorado, Boulder, CO, 80308, USA
2 shared publicationsA. Ramesh
1 shared publicationBalaji N
1 shared publicationBeemkumar Nagappan
Faculty of Engineering and Technology, Jain (Deemed-to-be University)
1 shared publicationBharath Balji Govindaraj
1 shared publication
Latest Publications
- Open Access
- 6 July 2026
- Published by Springer Nature in International Journal of Air-Conditioning and Refrigeration
Multi-Criteria Decision Making (MCDM) for optimizing split AC performance: an experimental study on CNT/TiO₂-enhanced POE lubricant
This study investigates the optimization of split air-conditioning system performance using a CNT/TiO₂-enhanced POE nanolubricant through experimental analysis and Multi-Criteria Decision Making (MCDM). The research evaluates key performance indicators, including energy efficiency, cooling capacity, power consumption, and system performance enhancement. The findings provide insights into the potential of hybrid nanolubricants for improving the sustainability and efficiency of HVAC systems.
- 6 July 2026
- Published by Springer Nature in International Journal of Air-Conditioning and Refrigeration
Open AccessMulti-Criteria Decision Making (MCDM) for optimizing split AC performance: an experimental study on CNT/TiO₂-enhanced POE lubricant
This study investigates the optimization of split air-conditioning system performance using a CNT/TiO₂-enhanced POE nanolubricant through experimental analysis and Multi-Criteria Decision Making (MCDM). The research evaluates key performance indicators, including energy efficiency, cooling capacity, power consumption, and system performance enhancement. The findings provide insights into the potential of hybrid nanolubricants for improving the sustainability and efficiency of HVAC systems.
- 24 May 2026
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
Experimental investigation of energy efficiency and cooling enhancement in domestic refrigeration using Al2O3–ZrO2/PAG hybrid nanolubricants
This paper presents an experimental investigation on enhancing energy efficiency and cooling performance in a domestic vapor compression refrigeration (VCR) system using Al2O3–ZrO2/PAG hybrid nanolubricants. The incorporation of nanoparticles into lubricating oils has been widely reported to enhance thermophysical properties, reduce energy consumption, and improve system performance. In this study, Al2O3 and ZrO2 nanoparticles at concentrations of 0.2, 0.4, and 0.6 g L−1 were dispersed in Polyalkylene Glycol (PAG) oil using ultrasonication and magnetic stirring to produce well-dispersed under experimental conditions. The modified refrigeration system, charged with environmentally friendly R-600a (isobutane) refrigerant, was evaluated under steady-state conditions with respect to compressor power consumption, refrigeration capacity, and coefficient of performance (COP). The results show that hybrid nanolubricants increased cooling capacity by 5.9%, reduced compressor power consumption by 28.4%, and enhanced COP from 3.00 to 4.05, representing a 46.2% improvement compared to the baseline system. These findings show that Al₂O₃–ZrO₂/PAG hybrid nanolubricants significantly improve cooling performance and energy efficiency, indicating potential for eco-friendly domestic refrigeration applications. Furthermore, this study addresses existing gaps in stability, thermophysical enhancement, and long-term system reliability.
- 24 May 2026
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
Experimental investigation of energy efficiency and cooling enhancement in domestic refrigeration using Al2O3–ZrO2/PAG hybrid nanolubricants
This paper presents an experimental investigation on enhancing energy efficiency and cooling performance in a domestic vapor compression refrigeration (VCR) system using Al2O3–ZrO2/PAG hybrid nanolubricants. The incorporation of nanoparticles into lubricating oils has been widely reported to enhance thermophysical properties, reduce energy consumption, and improve system performance. In this study, Al2O3 and ZrO2 nanoparticles at concentrations of 0.2, 0.4, and 0.6 g L−1 were dispersed in Polyalkylene Glycol (PAG) oil using ultrasonication and magnetic stirring to produce well-dispersed under experimental conditions. The modified refrigeration system, charged with environmentally friendly R-600a (isobutane) refrigerant, was evaluated under steady-state conditions with respect to compressor power consumption, refrigeration capacity, and coefficient of performance (COP). The results show that hybrid nanolubricants increased cooling capacity by 5.9%, reduced compressor power consumption by 28.4%, and enhanced COP from 3.00 to 4.05, representing a 46.2% improvement compared to the baseline system. These findings show that Al₂O₃–ZrO₂/PAG hybrid nanolubricants significantly improve cooling performance and energy efficiency, indicating potential for eco-friendly domestic refrigeration applications. Furthermore, this study addresses existing gaps in stability, thermophysical enhancement, and long-term system reliability.
- Open Access
- 13 January 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Sustainable valorization of marine plastic residues via hydrothermal liquefaction for clean energy recovery
This study evaluates hydrothermal liquefaction (HTL) of real-world marine pollutant residues (MPR) composed of mixed plastics, organic matter, paper, and textiles. Using diatomaceous earth (DE) catalysis and aqueous-phase (AQ) recirculation, the effects on product yield, composition, and energy recovery were examined. Under optimized conditions (380 °C, 80 min, 10 wt% DE, RR = 6 mL g -1 ), a maximum bio crude yield of 51.6% with an HHV of 40.3 MJ kg -1 was achieved. Elemental, molecular, and thermal analyses (CHNS, GC–MS, FTIR, TGA) indicated improved hydrocarbon content and reduced oxygenation in the DE + AQ configuration. Net energy ratio (NER) calculations showed that the process can achieve energy-positive operation under conditions of elevated AQ recirculation temperature, highlighting the importance of heat integration. While these results demonstrate effective conversion of heterogeneous marine residues into energy-dense products, broader sustainability claims require further assessment of emissions, wastewater toxicity, and scale-up feasibility. The study provides experimentally grounded insights into HTL as a potential component of coastal waste valorization strategies.
- 13 January 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessSustainable valorization of marine plastic residues via hydrothermal liquefaction for clean energy recovery
This study evaluates hydrothermal liquefaction (HTL) of real-world marine pollutant residues (MPR) composed of mixed plastics, organic matter, paper, and textiles. Using diatomaceous earth (DE) catalysis and aqueous-phase (AQ) recirculation, the effects on product yield, composition, and energy recovery were examined. Under optimized conditions (380 °C, 80 min, 10 wt% DE, RR = 6 mL g -1 ), a maximum bio crude yield of 51.6% with an HHV of 40.3 MJ kg -1 was achieved. Elemental, molecular, and thermal analyses (CHNS, GC–MS, FTIR, TGA) indicated improved hydrocarbon content and reduced oxygenation in the DE + AQ configuration. Net energy ratio (NER) calculations showed that the process can achieve energy-positive operation under conditions of elevated AQ recirculation temperature, highlighting the importance of heat integration. While these results demonstrate effective conversion of heterogeneous marine residues into energy-dense products, broader sustainability claims require further assessment of emissions, wastewater toxicity, and scale-up feasibility. The study provides experimentally grounded insights into HTL as a potential component of coastal waste valorization strategies.
- Open Access
- 20 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 28
Fused deposition modeling of functional nanohybrids: a transformative approach to sustainable water purification
- 20 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 28
Open AccessFused deposition modeling of functional nanohybrids: a transformative approach to sustainable water purification
- Open Access
- 23 September 2025
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 23
Prosopis juliflora ash – Novel discussion as replacement to cement in the production of sustainable concrete
- 23 September 2025
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 23
Open AccessProsopis juliflora ash – Novel discussion as replacement to cement in the production of sustainable concrete
- Open Access
- 2 June 2025
- Published by Elsevier in SSRN Electronic Journal
Synergistic Effects of N-Octanol-Blended Hevea Brasiliensis Seed Biodiesel and Hydrogen Induction for Enhanced Engine Performance
This study investigates the performance, combustion, and emission characteristics of a Kirloskar TV1 engine fueled with an 80% Hevea brasiliensis biodiesel and 20% n-Octanol blend (HB80OCT20), under varying hydrogen induction rates (8, 10, 12, and 14 LPM). The results demonstrate that hydrogen (H2) induction significantly enhances brake thermal efficiency (BTE), with the highest BTE of 32.33% recorded at 14 LPM under full load conditions—surpassing that of conventional diesel. Brake specific energy consumption (BSEC) decreases with increasing hydrogen flow rates, with the lowest BSEC of 9.752 MJ/kWh observed at 14 LPM, indicating improved energy utilization. Hydrocarbon (HC) and carbon monoxide (CO) emissions are notably reduced, with the minimum values occurring at 8 LPM, attributed to enhanced combustion kinetics facilitated by hydrogen. However, nitrogen oxides (NOx) emissions increase with higher hydrogen induction, peaking at 1871 ppm at 8 LPM under full load, primarily due to elevated combustion temperatures. Smoke opacity consistently decreases across all hydrogen flow rates, with a maximum reduction of 39% at 8 LPM compared to diesel under full load. In-cylinder pressure and heat release rate also rise with hydrogen induction, showing a peak pressure of 88.72 bar at 14 LPM, along with a shift toward an advanced combustion phase.
- 2 June 2025
- Published by Elsevier in SSRN Electronic Journal
Open AccessSynergistic Effects of N-Octanol-Blended Hevea Brasiliensis Seed Biodiesel and Hydrogen Induction for Enhanced Engine Performance
This study investigates the performance, combustion, and emission characteristics of a Kirloskar TV1 engine fueled with an 80% Hevea brasiliensis biodiesel and 20% n-Octanol blend (HB80OCT20), under varying hydrogen induction rates (8, 10, 12, and 14 LPM). The results demonstrate that hydrogen (H2) induction significantly enhances brake thermal efficiency (BTE), with the highest BTE of 32.33% recorded at 14 LPM under full load conditions—surpassing that of conventional diesel. Brake specific energy consumption (BSEC) decreases with increasing hydrogen flow rates, with the lowest BSEC of 9.752 MJ/kWh observed at 14 LPM, indicating improved energy utilization. Hydrocarbon (HC) and carbon monoxide (CO) emissions are notably reduced, with the minimum values occurring at 8 LPM, attributed to enhanced combustion kinetics facilitated by hydrogen. However, nitrogen oxides (NOx) emissions increase with higher hydrogen induction, peaking at 1871 ppm at 8 LPM under full load, primarily due to elevated combustion temperatures. Smoke opacity consistently decreases across all hydrogen flow rates, with a maximum reduction of 39% at 8 LPM compared to diesel under full load. In-cylinder pressure and heat release rate also rise with hydrogen induction, showing a peak pressure of 88.72 bar at 14 LPM, along with a shift toward an advanced combustion phase.
- 6 December 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (12) , 6609-6615
Experimental investigation on performance enhancement of vapor compression refrigeration (VCR) systems using nanorefrigerant [R-134a + ZrO2] at steady-state
- 6 December 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (12) , 6609-6615
Experimental investigation on performance enhancement of vapor compression refrigeration (VCR) systems using nanorefrigerant [R-134a + ZrO2] at steady-state