Yu-Rim Jeon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yu-Rim Jeon has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Deji Akinwande
Microelectronics Research Center, Department of Electrical and Computer Engineering, The University of Texas at Austin, Austin, USA
5 shared publications - Changhwan Choi
Division of Materials Science & Engineering, Hanyang University, Seoul, Korea
4 shared publications - Ali Javey
Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, CA, USA
1 shared publication - Ashok Mondal
Center for Integrated Nanostructure Physics, Institute for Basic Science, Sungkyunkwan University, Suwon, Republic of Korea
1 shared publication - Balakrishnan Kirubasankar
Hubei University of Technology
1 shared publication - Bilu Liu
Institute of Materials Research, Tsinghua Shenzhen International Graduate School
1 shared publication
Latest Publications
- Top Cited Papers
- 19 January 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (4) , 3228-3361
Contemporary Challenges in van der Waals 2D Semiconductors
Van der Waals (vdW) layered semiconductors have emerged as a unique class of quantum materials distinguished from their bulk counterparts by reduced dielectric screening, strong Coulomb interactions, large exciton binding energies, strong spin-orbit coupling, and pronounced thickness-dependent band structures. These fundamental attributes have enabled the exploration of exotic many-body physics and a broad spectrum of device applications, ranging from field-effect transistors and ferroelectric switches to optoelectronics, magnetic semiconductors, neuromorphic computing, and energy harvesting systems. Despite remarkable advances, critical challenges remain in the controlled synthesis of high-quality crystals, formation of low-resistance contacts, integration of stable and scalable gate dielectrics, and reliable device performance at the wafer scale. In this mega-review, we provide a comprehensive overview of contemporary challenges and future opportunities in vdW-layered semiconductors, structured across nine themes: growth and heterostructures of transition metal dichalcogenides, Ohmic contacts, emerging gate dielectrics, high-performance low-power field-effect transistors (FETs), diluted magnetic semiconductors, plasmonics and exciton propagation, hot-carrier solar cells, bioinspired neuromorphic computing, and electrocatalytic/photocatalytic energy conversion. By consolidating fundamental insights and device-level perspectives, this review aims to chart a roadmap for advancing vdW semiconductors from laboratory-scale discoveries to transformative technologies in electronics, optoelectronics, spintronics, and sustainable energy systems.
- 19 January 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (4) , 3228-3361
Top Cited PapersContemporary Challenges in van der Waals 2D Semiconductors
Van der Waals (vdW) layered semiconductors have emerged as a unique class of quantum materials distinguished from their bulk counterparts by reduced dielectric screening, strong Coulomb interactions, large exciton binding energies, strong spin-orbit coupling, and pronounced thickness-dependent band structures. These fundamental attributes have enabled the exploration of exotic many-body physics and a broad spectrum of device applications, ranging from field-effect transistors and ferroelectric switches to optoelectronics, magnetic semiconductors, neuromorphic computing, and energy harvesting systems. Despite remarkable advances, critical challenges remain in the controlled synthesis of high-quality crystals, formation of low-resistance contacts, integration of stable and scalable gate dielectrics, and reliable device performance at the wafer scale. In this mega-review, we provide a comprehensive overview of contemporary challenges and future opportunities in vdW-layered semiconductors, structured across nine themes: growth and heterostructures of transition metal dichalcogenides, Ohmic contacts, emerging gate dielectrics, high-performance low-power field-effect transistors (FETs), diluted magnetic semiconductors, plasmonics and exciton propagation, hot-carrier solar cells, bioinspired neuromorphic computing, and electrocatalytic/photocatalytic energy conversion. By consolidating fundamental insights and device-level perspectives, this review aims to chart a roadmap for advancing vdW semiconductors from laboratory-scale discoveries to transformative technologies in electronics, optoelectronics, spintronics, and sustainable energy systems.
- 20 December 2024
- Published by Wiley in Advanced Materials
- Vol. 37 (6) , e2413178
Enhanced Synaptic Memory Window and Linearity in Planar In 2 Se 3 Ferroelectric Junctions
A synaptic memristor using 2D ferroelectric junctions is a promising candidate for future neuromorphic computing with ultra‐low power consumption, parallel computing, and adaptive scalable computing technologies. However, its utilization is restricted due to the limited operational voltage memory window and low on/off current (I ON/OFF ) ratio of the memristor devices. Here, it is demonstrated that synaptic operations of 2D In 2 Se 3 ferroelectric junctions in a planar memristor architecture can reach a voltage memory window as high as 16 V (±8 V) and I ON/OFF ratio of 10 8 , significantly higher than the current literature values. The power consumption is 10 −5 W at the on state, demonstrating low power usage while maintaining a large I ON/OFF ratio of 10 8 compared to other ferroelectric devices. Moreover, the developed ferroelectric junction mimicked synaptic plasticity through pulses in the pre‐synapse. The nonlinearity factors are obtained 1.25 for LTP, −0.25 for LTD, respectively. The single‐layer perceptron (SLP) and convolutional neural network (CNN) on‐chip training results in an accuracy of up to 90%, compared to the 91% in an ideal synapse device. Furthermore, the incorporation of a 3 nm thick SiO 2 interface between the α‐In 2 Se 3 and the Au electrode resulted in ultrahigh performance among other 2D ferroelectric junction devices to date.
- 20 December 2024
- Published by Wiley in Advanced Materials
- Vol. 37 (6) , e2413178
Enhanced Synaptic Memory Window and Linearity in Planar In 2 Se 3 Ferroelectric Junctions
A synaptic memristor using 2D ferroelectric junctions is a promising candidate for future neuromorphic computing with ultra‐low power consumption, parallel computing, and adaptive scalable computing technologies. However, its utilization is restricted due to the limited operational voltage memory window and low on/off current (I ON/OFF ) ratio of the memristor devices. Here, it is demonstrated that synaptic operations of 2D In 2 Se 3 ferroelectric junctions in a planar memristor architecture can reach a voltage memory window as high as 16 V (±8 V) and I ON/OFF ratio of 10 8 , significantly higher than the current literature values. The power consumption is 10 −5 W at the on state, demonstrating low power usage while maintaining a large I ON/OFF ratio of 10 8 compared to other ferroelectric devices. Moreover, the developed ferroelectric junction mimicked synaptic plasticity through pulses in the pre‐synapse. The nonlinearity factors are obtained 1.25 for LTP, −0.25 for LTD, respectively. The single‐layer perceptron (SLP) and convolutional neural network (CNN) on‐chip training results in an accuracy of up to 90%, compared to the 91% in an ideal synapse device. Furthermore, the incorporation of a 3 nm thick SiO 2 interface between the α‐In 2 Se 3 and the Au electrode resulted in ultrahigh performance among other 2D ferroelectric junction devices to date.
- Open Access
- 17 June 2024
- Published by Wiley in Advanced Science
- Vol. 11 (31) , e2402667
The 3D Monolithically Integrated Hardware Based Neural System with Enhanced Memory Window of the Volatile and Non‐Volatile Devices
3D neuromorphic hardware system is first demonstrated in neuromorphic application as on‐chip level by integrating array devices with CMOS circuits after wafer bonding (WB) and interconnection process. The memory window of synaptic device is degraded after WB and 3 Dimesional (3D) integration due to process defects and thermal stress. To address this degradation, Ag diffusion in materials of Ta2O5 and HfO2 is studied in a volatile memristor, furthermore, the interconnection and gate metal Ru are investigated to reduce defective traps of gate interface in non‐volatile memory devices. As a result, a memory window is improved over 106 in both types of devices. Improved and 3D integrated 12 × 14 array devices are identified in the synaptic characteristics according to the change of the synaptic weight from the interconnected Test Element Group (TEG) of the Complementary Metal Oxide Semiconductor (CMOS) circuits. The trained array devices present recognizable image of letters, achieving an accuracy rate of 92% when utilizing a convolutional neural network, comparing the normalized accuracy of 93% achieved by an ideal synapse device. This study proposes to modulate the memory windows up to 106 in an integrated hardware‐based neural system, considering the possibility of device degradation in both volatile and non‐volatile memory devices demonstrated by the hardware neural system.
- 17 June 2024
- Published by Wiley in Advanced Science
- Vol. 11 (31) , e2402667
Open AccessThe 3D Monolithically Integrated Hardware Based Neural System with Enhanced Memory Window of the Volatile and Non‐Volatile Devices
3D neuromorphic hardware system is first demonstrated in neuromorphic application as on‐chip level by integrating array devices with CMOS circuits after wafer bonding (WB) and interconnection process. The memory window of synaptic device is degraded after WB and 3 Dimesional (3D) integration due to process defects and thermal stress. To address this degradation, Ag diffusion in materials of Ta2O5 and HfO2 is studied in a volatile memristor, furthermore, the interconnection and gate metal Ru are investigated to reduce defective traps of gate interface in non‐volatile memory devices. As a result, a memory window is improved over 106 in both types of devices. Improved and 3D integrated 12 × 14 array devices are identified in the synaptic characteristics according to the change of the synaptic weight from the interconnected Test Element Group (TEG) of the Complementary Metal Oxide Semiconductor (CMOS) circuits. The trained array devices present recognizable image of letters, achieving an accuracy rate of 92% when utilizing a convolutional neural network, comparing the normalized accuracy of 93% achieved by an ideal synapse device. This study proposes to modulate the memory windows up to 106 in an integrated hardware‐based neural system, considering the possibility of device degradation in both volatile and non‐volatile memory devices demonstrated by the hardware neural system.
- Open Access
- 5 March 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
- Vol. 9 (5) , 853-862
Volatile threshold switching and synaptic properties controlled by Ag diffusion using Schottky defects
The identified mechanism of the high-k metal oxide by XPS, XRR, and TEM applied to a synaptic device as a diffusion memristor with control and switching layers that could control Ag ion migration, emulating the synaptic plasticity.
- 5 March 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
- Vol. 9 (5) , 853-862
Open AccessVolatile threshold switching and synaptic properties controlled by Ag diffusion using Schottky defects
The identified mechanism of the high-k metal oxide by XPS, XRR, and TEM applied to a synaptic device as a diffusion memristor with control and switching layers that could control Ag ion migration, emulating the synaptic plasticity.
- Open Access
- 22 February 2024
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (6)
Synaptic Characteristics of Fully Depleted Silicon‐on‐Insulator Metal‐Oxide‐Semiconductor Field‐Effect Transistors and Synapse‐Neuron Arrayed Neuromorphic Hardware System
A fully depleted silicon‐on‐insulator (FDSOI) metal‐oxide‐semiconductor field‐effect transistors (MOSFETs) device is investigated as for an electronic synapse emulating the synaptic functions of the human brain with stable characteristics. Gate‐last processed FDSOI MOSFET with a high‐k/metal gate stack features a memory window of 103. Synaptic conductance is stably regulated by utilizing the FDSOI MOSFET, which offers the advantage of mitigating leakage current when compared to bulk Si MOSFET. Short‐ and long‐term plasticity are investigated by applying engineered pulse, verifying the long‐term synaptic properties of pattern recognition processes. With controllable synaptic conductance, the trade‐off between conductance change and linearity regarding the recognition rate is evaluated, attaining a recognition rate of 0.83. To verify the pre‐ and post‐synaptic weights within a real hardware‐based neuromorphic system, 5 × 6 FDSOI field‐effect transistor (FET) synapse array is interconnected to 10 × 10 leaky integrate‐and‐fire (LIF) neuron array. The synaptic plasticity of FDSOI MOSFET in post‐neurons following neuron firing in the neuron device is successfully demonstrated. These results indicate that FDSOI MOSFET devices could be applicable as synapse devices due to controllability and capability to realize signal transmissions and self‐learning processes simultaneously and used to mimic a synapse neuron network system by configuring a hardware system interconnected with the LIF neuron.
- 22 February 2024
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (6)
Open AccessSynaptic Characteristics of Fully Depleted Silicon‐on‐Insulator Metal‐Oxide‐Semiconductor Field‐Effect Transistors and Synapse‐Neuron Arrayed Neuromorphic Hardware System
A fully depleted silicon‐on‐insulator (FDSOI) metal‐oxide‐semiconductor field‐effect transistors (MOSFETs) device is investigated as for an electronic synapse emulating the synaptic functions of the human brain with stable characteristics. Gate‐last processed FDSOI MOSFET with a high‐k/metal gate stack features a memory window of 103. Synaptic conductance is stably regulated by utilizing the FDSOI MOSFET, which offers the advantage of mitigating leakage current when compared to bulk Si MOSFET. Short‐ and long‐term plasticity are investigated by applying engineered pulse, verifying the long‐term synaptic properties of pattern recognition processes. With controllable synaptic conductance, the trade‐off between conductance change and linearity regarding the recognition rate is evaluated, attaining a recognition rate of 0.83. To verify the pre‐ and post‐synaptic weights within a real hardware‐based neuromorphic system, 5 × 6 FDSOI field‐effect transistor (FET) synapse array is interconnected to 10 × 10 leaky integrate‐and‐fire (LIF) neuron array. The synaptic plasticity of FDSOI MOSFET in post‐neurons following neuron firing in the neuron device is successfully demonstrated. These results indicate that FDSOI MOSFET devices could be applicable as synapse devices due to controllability and capability to realize signal transmissions and self‐learning processes simultaneously and used to mimic a synapse neuron network system by configuring a hardware system interconnected with the LIF neuron.
- 2 December 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (49) , 57359-57368
Synaptic Characteristics of Atomic Layer-Deposited Ferroelectric Lanthanum-Doped HfO2 (La:HfO2) and TaN-Based Artificial Synapses
Analog synaptic devices have made significant advances based on various electronic materials that can realize the biological synapse properties of neuromorphic computing. Ferroelectric (FE) HfO2-based materials with nonvolatile and low power consumption characteristics are being studied as promising materials for application to analog synaptic devices. The gradual reversal of FE multilevel polarization results in precise changes in the channel conductance and allows analogue synaptic weight updates. However, there have been few studies of FE synaptic devices doped with La, Y, and Gd. Furthermore, an investigation of interface quality is also crucial to enhance the remnant polarization (Pr), synaptic conductance linearity, and reliability characteristics. In this study, we demonstrate improved FE and artificial synaptic characteristics using an atomic layer-deposited (ALD) lanthanum-doped HfO2 (La:HfO2) and TaN electrode in the structure of an FE thin-film transistor (ITO/IGZO/La:HfO2/TaN), where indium-tin oxide (ITO) and indium-gallium-zinc oxide (IGZO) were used as source/drain and channel materials, respectively. Improved Pr and lower surface roughness were achieved by doped HfO2 and ALD TaN thin films. This synaptic transistor shows long-term potentiation and long-term depression with 200 levels of conductance states, high linearity (Ap, 0.97; Ad, 0.86), high Gmax/Gmin (∼6.1), and low cycle-to-cycle variability. In addition, a pattern recognition accuracy higher than 90% was achieved in an artificial neural network simulation.
- 2 December 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (49) , 57359-57368
Synaptic Characteristics of Atomic Layer-Deposited Ferroelectric Lanthanum-Doped HfO2 (La:HfO2) and TaN-Based Artificial Synapses
Analog synaptic devices have made significant advances based on various electronic materials that can realize the biological synapse properties of neuromorphic computing. Ferroelectric (FE) HfO2-based materials with nonvolatile and low power consumption characteristics are being studied as promising materials for application to analog synaptic devices. The gradual reversal of FE multilevel polarization results in precise changes in the channel conductance and allows analogue synaptic weight updates. However, there have been few studies of FE synaptic devices doped with La, Y, and Gd. Furthermore, an investigation of interface quality is also crucial to enhance the remnant polarization (Pr), synaptic conductance linearity, and reliability characteristics. In this study, we demonstrate improved FE and artificial synaptic characteristics using an atomic layer-deposited (ALD) lanthanum-doped HfO2 (La:HfO2) and TaN electrode in the structure of an FE thin-film transistor (ITO/IGZO/La:HfO2/TaN), where indium-tin oxide (ITO) and indium-gallium-zinc oxide (IGZO) were used as source/drain and channel materials, respectively. Improved Pr and lower surface roughness were achieved by doped HfO2 and ALD TaN thin films. This synaptic transistor shows long-term potentiation and long-term depression with 200 levels of conductance states, high linearity (Ap, 0.97; Ad, 0.86), high Gmax/Gmin (∼6.1), and low cycle-to-cycle variability. In addition, a pattern recognition accuracy higher than 90% was achieved in an artificial neural network simulation.