Cristian-Brayan Palacios-Cabrera
Research Subjects
Research Interests
Cristian-Brayan Palacios-Cabrera has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Alan-Javier Santiago-Cuevas
Universidad Nacional Autónoma de México, Ciudad Universitaria, Ciudad de México
4 shared publications - Eduardo-Daniel Tecuapa-Flores
Grupo de Investigación Desarrollo E Innovación en Ingeniería de Procesos y Nuevos Materiales, Vicerrectoría de Investigación, Universidad La Salle México, Mexico City, Mexico
4 shared publications - Pandiyan Thangarasu
Facultad de Química Universidad Nacional Autónoma de México (UNAM) Cd. Universitaria 04510 México, D.F. México
3 shared publications - Jayanthi Narayanan
División de Ingeniería en Nanotecnología, Universidad Politécnica del Valle de México, Av. Mexiquense s/n Esquina Av. Universidad Politécnica, Tultitlán 54910, Estado de México, Mexico
2 shared publications - Carlos Alberto Huerta-Aguilar
School of Engineering and Sciences, Tecnológico de Monterrey, Puebla, México
1 shared publication - Eduard Llobet
Universitat Rovira i Virgili
1 shared publication
Latest Publications
- Open Access
- 16 September 2026
- Published by Universidad Autonoma de Puebla in RD-ICUAP
NANOTECNOLOGÍA: DE LA PROMESA A LA PREOCUPACIÓN
La nanotecnología ha experimentado un crecimiento acelerado en las últimas décadas, consolidándose como un eje estratégico para el desarrollo tecnológico en múltiples áreas del conocimiento. No obstante, al tratarse de una disciplina relativamente reciente, aún persisten incertidumbres significativas respecto a sus posibles efectos a mediano y largo plazo sobre el medio ambiente y la salud humana. En particular, la nanotecnología ambiental, orientada a la remediación de contaminantes en agua, suelo y aire, ha propuesto soluciones altamente innovadoras y eficientes. Sin embargo, la misma naturaleza fisicoquímica que confiere a los nanomateriales propiedades únicas, como su elevada área superficial, reactividad y capacidad de interacción específica, también puede asociarse con riesgos toxicológicos variables, dependientes del tipo de nanopartícula, su composición, tamaño, morfología y condiciones de exposición. Diversos estudios han documentado que ciertos nanomateriales pueden inducir efectos adversos tales como alteraciones genéticas, disrupción endocrina, bioacumulación en cadenas tróficas, liberación o transporte de metales pesados y toxicidad aguda o crónica en organismos vegetales y animales. Asimismo, los procesos de síntesis y funcionalización de estos materiales pueden generar subproductos y residuos potencialmente problemáticos, incluyendo polímeros de baja biodegradabilidad y desechos de sales metálicas. En este contexto, resulta necesario evaluar de manera integral el impacto ambiental asociado a cada etapa del ciclo de vida de las tecnologías basadas en nanomateriales, desde su producción hasta su disposición final. El presente trabajo compendia y analiza la evidencia disponible sobre los principales riesgos ambientales vinculados al desarrollo y aplicación de la nanotecnología.
- 16 September 2026
- Published by Universidad Autonoma de Puebla in RD-ICUAP
Open AccessNANOTECNOLOGÍA: DE LA PROMESA A LA PREOCUPACIÓN
La nanotecnología ha experimentado un crecimiento acelerado en las últimas décadas, consolidándose como un eje estratégico para el desarrollo tecnológico en múltiples áreas del conocimiento. No obstante, al tratarse de una disciplina relativamente reciente, aún persisten incertidumbres significativas respecto a sus posibles efectos a mediano y largo plazo sobre el medio ambiente y la salud humana. En particular, la nanotecnología ambiental, orientada a la remediación de contaminantes en agua, suelo y aire, ha propuesto soluciones altamente innovadoras y eficientes. Sin embargo, la misma naturaleza fisicoquímica que confiere a los nanomateriales propiedades únicas, como su elevada área superficial, reactividad y capacidad de interacción específica, también puede asociarse con riesgos toxicológicos variables, dependientes del tipo de nanopartícula, su composición, tamaño, morfología y condiciones de exposición. Diversos estudios han documentado que ciertos nanomateriales pueden inducir efectos adversos tales como alteraciones genéticas, disrupción endocrina, bioacumulación en cadenas tróficas, liberación o transporte de metales pesados y toxicidad aguda o crónica en organismos vegetales y animales. Asimismo, los procesos de síntesis y funcionalización de estos materiales pueden generar subproductos y residuos potencialmente problemáticos, incluyendo polímeros de baja biodegradabilidad y desechos de sales metálicas. En este contexto, resulta necesario evaluar de manera integral el impacto ambiental asociado a cada etapa del ciclo de vida de las tecnologías basadas en nanomateriales, desde su producción hasta su disposición final. El presente trabajo compendia y analiza la evidencia disponible sobre los principales riesgos ambientales vinculados al desarrollo y aplicación de la nanotecnología.
- Open Access
- 25 August 2026
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 23 (9) , 602
Solar/visible lights assisted photocatalyst TiO2/ZnO/CQD: detection and degradation of levofloxacin
- 25 August 2026
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 23 (9) , 602
Open AccessSolar/visible lights assisted photocatalyst TiO2/ZnO/CQD: detection and degradation of levofloxacin
- Open Access
- 27 May 2026
- Published by Elsevier in SSRN Electronic Journal
ZnO facets induced photocatalytic oxidation of naproxen under solar light using green synthesized carbon quantum dots (CQD)/MFe2O4-ZnO, M = Fe2+, Co2+, Ni2+, Cu2+)
The increasing of pharmaceutical contaminants in aquatic environments has generated significant concern due to their persistence and potential toxicity. In this work, a series of metal-oxide-based carbon quantum dots (CQD/MFe2O4-ZnO, M = Fe2+, Co2+, Ni2+, Cu2+) was prepared using an eco-friendly method and characterized by various analytical techniques. The results show that iron oxide in the spinel phase and ZnO in the hexagonal wurtzite were observed along with carbon quantum dots (band energy ~ 1.87-2.10 eV). In the photoluminescence spectra, the intensity of peaks was decreased considerably as the electron-hole recombination effect decreased due to efficient charge transfer within the CQD/ferrite-ZnO heterojunction. For example, for CQD/Fe3O4-ZnO (391 nm, FWHM= 34.83 nm), close to the ZnO NBE, indicating preserved band-edge transitions with modified recombination dynamics because of strong interfacial coupling that facilitates an efficient charge transfer, suppressing the radiative recombination. Photocatalytic oxidation of naproxen under solar and visible lights was resulting to k= 0.0146 mM/s for CQD/Fe3O4-ZnO, k= 0.076 for CQD/CoFe2O4-ZnO, k= 0.075 for CQD/NiFe2O4-ZnO, k= 0.036 for CQD/CuFe2O4-ZnO, indicating the oxidation was 83.52% under solar light, that was further improved to 91.89% (k = 0.0214) when air bubbling was introduced into the reactor because high oxygen content in the reaction medium. Furthermore, the scavenging effect of free radicals (decreased to 48.38%) and cell imaging development of samples were also studied.
- 27 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessZnO facets induced photocatalytic oxidation of naproxen under solar light using green synthesized carbon quantum dots (CQD)/MFe2O4-ZnO, M = Fe2+, Co2+, Ni2+, Cu2+)
The increasing of pharmaceutical contaminants in aquatic environments has generated significant concern due to their persistence and potential toxicity. In this work, a series of metal-oxide-based carbon quantum dots (CQD/MFe2O4-ZnO, M = Fe2+, Co2+, Ni2+, Cu2+) was prepared using an eco-friendly method and characterized by various analytical techniques. The results show that iron oxide in the spinel phase and ZnO in the hexagonal wurtzite were observed along with carbon quantum dots (band energy ~ 1.87-2.10 eV). In the photoluminescence spectra, the intensity of peaks was decreased considerably as the electron-hole recombination effect decreased due to efficient charge transfer within the CQD/ferrite-ZnO heterojunction. For example, for CQD/Fe3O4-ZnO (391 nm, FWHM= 34.83 nm), close to the ZnO NBE, indicating preserved band-edge transitions with modified recombination dynamics because of strong interfacial coupling that facilitates an efficient charge transfer, suppressing the radiative recombination. Photocatalytic oxidation of naproxen under solar and visible lights was resulting to k= 0.0146 mM/s for CQD/Fe3O4-ZnO, k= 0.076 for CQD/CoFe2O4-ZnO, k= 0.075 for CQD/NiFe2O4-ZnO, k= 0.036 for CQD/CuFe2O4-ZnO, indicating the oxidation was 83.52% under solar light, that was further improved to 91.89% (k = 0.0214) when air bubbling was introduced into the reactor because high oxygen content in the reaction medium. Furthermore, the scavenging effect of free radicals (decreased to 48.38%) and cell imaging development of samples were also studied.
- 2 November 2023
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 149 (1) , 108-124
Simultaneous recognition of dopamine and uric acid in real samples through highly sensitive new electrode fabricated using ZnO/carbon quantum dots: bio-imaging and theoretical studies
Dopamine (DA) and uric acid (UA), which are vital components in human metabolism, cause several health problems if they are present in altered concentrations; thus, the determination of DA and UA is essential in real samples using selective sensors. In the present study, graphite carbon paste electrodes (CPE) were fabricated using ZnO/carbon quantum dots (ZnO/CQDs) and employed as electrochemical sensors for the detection of DA and UA. These electrodes were fully characterized via different analytical techniques (XRD, SEM, TEM, XPS, and EDS). The electrochemical responses from the modified electrodes were evaluated using cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy. The results showed that the present electrode has exhibited high sensitivity towards DA, recognizing even at low concentrations (0.12 μM), and no inference was observed in the presence of UA. The ZnO/CQD electrode was applied for the simultaneous detection of co-existing DA and UA in real human urine samples and the peak potential separation between DA and UA was found to be greatly associated with the synergistic effect originated from ZnO and CQDs. The limit of detection (LOD) of the electrode was analyzed, and compared with other commercially available electrodes. Thus, the ZnO/CQD electrode was used to detect DA and UA in real samples, such as Saccharomyces cerevisiae cells.
- 2 November 2023
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 149 (1) , 108-124
Simultaneous recognition of dopamine and uric acid in real samples through highly sensitive new electrode fabricated using ZnO/carbon quantum dots: bio-imaging and theoretical studies
Dopamine (DA) and uric acid (UA), which are vital components in human metabolism, cause several health problems if they are present in altered concentrations; thus, the determination of DA and UA is essential in real samples using selective sensors. In the present study, graphite carbon paste electrodes (CPE) were fabricated using ZnO/carbon quantum dots (ZnO/CQDs) and employed as electrochemical sensors for the detection of DA and UA. These electrodes were fully characterized via different analytical techniques (XRD, SEM, TEM, XPS, and EDS). The electrochemical responses from the modified electrodes were evaluated using cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy. The results showed that the present electrode has exhibited high sensitivity towards DA, recognizing even at low concentrations (0.12 μM), and no inference was observed in the presence of UA. The ZnO/CQD electrode was applied for the simultaneous detection of co-existing DA and UA in real human urine samples and the peak potential separation between DA and UA was found to be greatly associated with the synergistic effect originated from ZnO and CQDs. The limit of detection (LOD) of the electrode was analyzed, and compared with other commercially available electrodes. Thus, the ZnO/CQD electrode was used to detect DA and UA in real samples, such as Saccharomyces cerevisiae cells.