DNDaniel Nash

Daniel Nash

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daniel Nash has a total of 127 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Electrical and power supply systems of Helios fusion power plant

    by M. Slepchenkov, M. Savastianov, S. Srinivasan, D. Nash, C.P.S. Swanson, S. Walsh, D.A. Gates, B. Berzin


  • Open Access

    Design of the superconducting encircling coils for Helios, the planar coil stellarator

    by Jamal R. Olatunji, Daniel Nash, Danis Fort, William Harris, Jared Wasserman, Scott Walsh, Thomas Kruger, Ryan Wu, David A. Gates, Charles P.S. Swanson


  • Open Access

    Superconducting planar coils for magnetic field shaping in the Helios Stellarator

    by Jamal R. Olatunji, Daniel Nash, Danis Fort, William Harris, Jared Wasserman, Benjamin S. Reydel, Scott Walsh, Thomas Kruger, Ryan Wu, David Gates, et al.


  • Open Access

    Control, diagnostic, and instrumentation systems of the Helios fusion power plant

    by M. Slepchenkov, A. Saucedo, M. Dickerson, A. Cate, C.P.S. Swanson, S.T.A. Kumar, S. Walsh, D. Nash, D.A. Gates, B. Berzin


  • Open Access

    Prototyping and Test of the “Canis” HTS Planar Coil Array for Stellarator Field Shaping

    by Daniel Nash, Andy D. Cate, Brian Chen, Matthew Dickerson, David A. Gates, William Harris, Udyaaksh Khera, Milo Korman, Jamal Olatunji, Misha Slepchenkov, et al.

    Thea Energy, Inc. is currently developing the “Eos” planar coil stellarator, the company’s first integrated fusion system capable of forming optimized stellarator magnetic fields without complex and costly modular coils. To demonstrate the field shaping capability required to enable Eos, Thea Energy designed, constructed, and tested the “Canis” 3 × 3 array of high-temperature superconductor (HTS) planar shaping coils after successfully demonstrating a single shaping coil prototype. Through the Canis 3 × 3 magnet array program, Thea Energy manufactured nine HTS shaping coils and developed the cryogenic test and measurement infrastructure necessary to validate the array’s performance. Thea Energy operated the array at 20 K, generating several stellarator-relevant magnetic field shapes and demonstrating closed-loop field control of the superconducting magnets to within 1% of predicted field, a margin of error acceptable for operation of an integrated stellarator. The Canis magnet array test campaign provides a proof of concept for HTS planar shaping coils as a viable approach to confining stellarator plasmas.


  • Liquid Nitrogen Superconducting Test Facility at the MIT Plasma Science and Fusion Center

    by Alexey Kaplan, Theodore Golfinopoulos, Philip C. Michael, Raheem Barnett, Sarah Chamberlain, Ruben Rui Diaz-Pacheco, Jose Estrada, Ashleigh Francis, Ivan Garcia, Zachary S. Hartwig, et al.

    Accurate characterization of superconducting components is a critical step in quality assurance of large magnet systems. High Temperature Superconductor (HTS) tapes, cables and coils have the unique advantage of allowing for convenient and low-cost testing in liquid nitrogen (LN2) environments. The MIT Plasma Science and Fusion Center's (PSFC) LN2 test facility provides a powerful, flexible, rapid solution for measuring such articles. This facility has been operational since 2020 and has performed quality assurance tests of sub-elements for such coils as the SPARC Toroidal Field Model Coil (TFMC) and Central Solenoid Model Coil (CSMC). The facility also supports development of manufacturing processes, evaluated via routine conductor testing.


  • Supercritical Helium Flow Calorimetry at the MIT Superconducting Magnet Test Facility

    by Philip C. Michael, Theodore Golfinopoulos, Alexey Kaplan, Shane Schweiger, Ivan Garcia, Amy Watterson, Sarah Chamberlain, Daniel Nash, Christopher Craighill, Charlie Sanabria, et al.

    This paper presents recent upgrades to the supercritical helium circuit at the MIT Superconducting Magnet Test Facility to support the characterization of REBCO-based cable magnets. In particular, we discuss the design, calibration and installation of dedicated mass flow meters for every conductor layer in a multi-layer magnet. The design and manufacture of dedicated calibration heaters for each flow path is also described. When used in concert with inlet and outlet pressure and temperature sensors, these upgrades allow us to characterize the hydraulic response of each conductor layer. When deployed as a helium flow calorimeter, the configuration provides a cross-check of DC power dissipation in layer-to-layer conductor joints, facilitates the determination of AC loss heating during swept current and exponential current dump discharges, and permits a more accurate assessment of the energy dissipation within a magnet during quenching. Representative examples for each type of measurement are shown.


  • Open Access

    Design, Fabrication, and Assembly of the SPARC Toroidal Field Model Coil

    by Rui F. Vieira, David Arsenault, Raheem Barnett, Larry Bartoszek, William Beck, Sarah Chamberlain, J. L. Cheng, Eric Dombrowski, Jeffrey Doody, Darby Dunn, et al.

    The SPARC Toroidal Field Model Coil (TFMC) is the first large-scale (∼3 m), high-field (∼20 T) superconducting fusion magnet based on Rare Earth Yttrium Barium Copper Oxide (REBCO). Weighing 10,058 kg and utilizing 270 km of REBCO, the TFMC is a non-insulated, stack-in-plate style superconducting magnet. It has three main components: (1) the winding pack; (2) the structural case; and (3) the case extensions, or plena. The winding pack is composed of sixteen single pancakes with two termination plates top and bottom. The pancakes are Nitronic 40 radial plates machined with spiral channels on one side for the REBCO tape stack and single-pass channels on the opposite side for supercritical helium coolant. After assembly, each pancake undergoes a vacuum-pressure impregnation solder process to provide good mechanical protection of the REBCO tape stack and efficient thermal and electrical connectivity within each pancake. The pancakes are bolted along the inner and outer perimeter to provide mechanical and thermal connectivity while inter-pancake joints provide low resistance current transfer between pancakes. The top and bottom termination plates facilitate electrical connection to a superconducting feeder system. Embedded throughout the winding pack are 211 voltage taps, 34 temperature sensors, 34 helium flow monitors, 4 Hall probes, and 4 resistive surface heaters. The winding pack is contained within a structural case, a “trough and lid” style design composed of two Nitronic 50 forgings machined to shape and bolted together. The case reacts the large electromechanical stresses approaching 1 GPa during operation and serves as a pressure vessel that enables 20 bar supercritical helium flow that cools the winding pack and case. Two case extensions are attached to the case with unique high-pressure feedthroughs to provide winding pack access for current, cooling, and instrumentation, completing the magnet assembly.


  • Open Access

    Building the Runway: A New Superconducting Magnet Test Facility Made for the SPARC Toroidal Field Model Coil

    by T. Golfinopoulos, P. C. Michael, E. Ihloff, A. Zhukovsky, D. Nash, V. Fry, J. P. Muncks, R. Barnett, L. Bartoszek, W. Beck, et al.

    A new superconducting magnet test facility was created at the MIT Plasma Science and Fusion Center (PSFC) for the SPARC Toroidal Field Model Coil (TFMC) program. The facility was designed and constructed in parallel with the TFMC between 2019 and 2021, with capabilities and design approaches tailored to the needs of this project and its time line. The major components of the facility include a new cryostat (outer dimensions, 5.3 m × 3.7 m × 1.5 m) with open bore; a novel cooling system circulating supercritical helium in a closed loop to provide $\sim$ 600 W cooling power at $\sim$ 20 bar-a, $\sim$ 20 K; a 50-kA $\pm$ 10-V power supply with supporting nitrogen-cooled high temperature superconductor (HTS) binary current leads operating at record currents, as well as VIPER-cable HTS cold bus; and a new instrumentation and programmable-logic-controller-based control system handling $\sim$ 650 input and output signals distributed between the facility and the test article. Substantial legacy infrastructure inherited from the PSFC's Alcator C-Mod tokamak program, including liquid nitrogen facilities and 10 mW of ac power, was instrumental in the rapid deployment of these new systems. Immediately after initial commissioning, the facility was used successfully to test the SPARC TFMC, operating the magnet in a campaign achieving 20 T on the coil, as well as a second campaign performing quench testing. The facility has since undergone several upgrades and has been used in campaigns of other test articles, and it is expected that the facility will remain a resource for the community for the foreseeable future to develop fusion magnets and related technology.


  • Top Cited Papers
    Open Access

    Experimental Assessment and Model Validation of the SPARC Toroidal Field Model Coil

    by D. G. Whyte, B. LaBombard, J. Doody, T. Golfinopolous, R. Granetz, C. Lammi, S. Lane-Walsh, P. Michael, T. Mouratidis, R. Mumgaard, et al.

    In this article, the SPARC Toroidal Field Model Coil (TFMC) experimental tests are described. The tests include detailed comparisons to a hierarchy of electromagnetic and structural models of the coil. The tests confirm the ability of the no-insulation no-twist (NINT) configuration to provide highly stable dc operations with peak magnetic field in excess of 20 T at the rare earth yttrium barium copper oxide (REBCO) tape stacks. The advantages of the modular TFMC approach are validated including the ability to test and probe the REBCO and structural response of the coil in stages, a strategy that will be applied to large-scale coil production for SPARC. The electromagnetic models show high fidelity agreement to the dc and charging coil performance in terms of current distribution, voltages, and heating. The transient response of the TFMC to open-circuit events is examined. The coil exhibits the positive features of the NINT design with very low induced voltages and a predictable redistribution of current and resulting volumetric heating. However, highly localized damage occurs during a programmed open circuit at operational conditions similar to those used in the SPARC tokamak, in agreement with calibrated electromagnetic models. This reveals the cause and remedy to the thermal instability that gives rise to the damage. Therefore, the conclusion of the tests is that the NINT TFMC is confirmed as meeting the programmatic requirements for SPARC and, more generally, for high-field tokamaks.