Abdelrahman G. Gadallah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abdelrahman G. Gadallah has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed A. Bhran
Chemical Engineering Department, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi Arabia
12 shared publications - Abeer Mahmoud Shoaib
Petroleum Refining and Petrochemical Engineering Department, Faculty of Petroleum and Mining Engineering, Suez University, Suez 43512, Egypt
6 shared publications - Amr A. Atawia
Petroleum Refining and Petrochemical Engineering Department, Faculty of Petroleum and Mining Engineering, Suez University, Suez 43512, Egypt
3 shared publications Indumathi Thangavelu
Department of Chemistry, CHRIST (Deemed to be University), Bangalore, India
3 shared publications- Mohamed H. Hassanean
Petroleum Refining and Petrochemical Engineering Department, Faculty of Petroleum and Mining Engineering, Suez University, Suez 43512, Egypt
3 shared publications - Mona Amin Abdel-Fatah
Chemical Engineering and Pilot Plant Department, National Research Centre, El-Bohouth Street-Dokki, Cairo 12622, Egypt
3 shared publications
Latest Publications
- Open Access
- 25 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5281
Carbon Footprints of Wastewater Treatment Plants: A Comprehensive Analysis of Emission Sources and Quantification for Sequencing Batch Reactor System
Wastewater treatment plants (WWTPs) are significant contributors to anthropogenic greenhouse gas (GHG) emissions through both direct biological processes generating methane (CH4), nitrous oxide (N2O), and biogenic carbon dioxide (CO2) and indirect energy consumption. This comprehensive research paper synthesizes findings from 30 peer-reviewed studies to present a holistic analysis of carbon footprints in wastewater treatment, with a specific quantitative assessment of a sequencing batch reactor (SBR) facility processing 5000 m3/day. The SBR operates with anoxic–aerobic cycles (fill–anoxic react–aerobic react–settle–decant–idle). The analysis reveals that N2O emissions can constitute up to 75% of a plant’s carbon footprint, while aeration accounts for 40–75% of total energy consumption. For the SBR facility, the baseline carbon footprint is 1648 tCO2e/year [95% CI: 1420–1910] (0.90 kg CO2e/m3) under conservative assumptions, with CH4 yield of 0.03 kg CH4/kg COD removed and N2O yield of 0.008 kg N2O-N/kg TN removed. A realistic baseline using median literature values gives 0.52 kg CO2e/m3. The carbon footprint of WWTPs varies by treatment technology, scale, and operational conditions, ranging from 61 to 161 kg CO2e per population equivalent (PE) annually. Through anaerobic digestion with biogas recovery and anoxic phase optimization, emissions can be reduced by 38% to 1018 tCO2e/year [95% CI: 860–1190]. The findings underscore that achieving carbon neutrality requires extending accounting beyond plant boundaries to include effluent exports, sludge management, and urban infrastructure integration. This paper provides a transparent, practitioner-ready framework for understanding, quantifying, and mitigating carbon emissions from wastewater treatment, with particular emphasis on SBR technology.
- 25 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5281
Open AccessCarbon Footprints of Wastewater Treatment Plants: A Comprehensive Analysis of Emission Sources and Quantification for Sequencing Batch Reactor System
Wastewater treatment plants (WWTPs) are significant contributors to anthropogenic greenhouse gas (GHG) emissions through both direct biological processes generating methane (CH4), nitrous oxide (N2O), and biogenic carbon dioxide (CO2) and indirect energy consumption. This comprehensive research paper synthesizes findings from 30 peer-reviewed studies to present a holistic analysis of carbon footprints in wastewater treatment, with a specific quantitative assessment of a sequencing batch reactor (SBR) facility processing 5000 m3/day. The SBR operates with anoxic–aerobic cycles (fill–anoxic react–aerobic react–settle–decant–idle). The analysis reveals that N2O emissions can constitute up to 75% of a plant’s carbon footprint, while aeration accounts for 40–75% of total energy consumption. For the SBR facility, the baseline carbon footprint is 1648 tCO2e/year [95% CI: 1420–1910] (0.90 kg CO2e/m3) under conservative assumptions, with CH4 yield of 0.03 kg CH4/kg COD removed and N2O yield of 0.008 kg N2O-N/kg TN removed. A realistic baseline using median literature values gives 0.52 kg CO2e/m3. The carbon footprint of WWTPs varies by treatment technology, scale, and operational conditions, ranging from 61 to 161 kg CO2e per population equivalent (PE) annually. Through anaerobic digestion with biogas recovery and anoxic phase optimization, emissions can be reduced by 38% to 1018 tCO2e/year [95% CI: 860–1190]. The findings underscore that achieving carbon neutrality requires extending accounting beyond plant boundaries to include effluent exports, sludge management, and urban infrastructure integration. This paper provides a transparent, practitioner-ready framework for understanding, quantifying, and mitigating carbon emissions from wastewater treatment, with particular emphasis on SBR technology.
- Open Access
Structure–Property Relationships in Streptomycin Sulfate–Incorporated Bioactive Glass/Chitosan Composite Scaffold: Physicochemical and Antibacterial Insights
In this study, a streptomycin sulfate-loaded bioactive glass/chitosan (STRS–BG/CH) composite scaffold was fabricated via an improved unidirectional freeze-drying method, with drug loadings of 20–40%. The scaffolds were investigated by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray analysis before and after in vitro testing. Antibacterial efficacy was evaluated against Gram-positive (Enterococcus faecalis, Staphylococcus aureus) and Gram-negative (Klebsiella pneumoniae, Escherichia coli) microorganisms via the agar diffusion method. The STRS–BG/CH scaffolds exhibited highly interconnected porous structures, prolonged antibacterial activity, and enhanced apatite-forming ability in vitro. Compared with bead-based carriers, scaffold-based systems provide enhanced structural integrity and interconnected porosity, which are advantageous for sustained drug release, apatite formation, and tissue integration. Accordingly, these multifunctional scaffolds may simultaneously provide localized antibacterial activity and potential relevance to bone tissue engineering applications. The prepared STRS–BG/CH scaffolds functioned as controlled release carriers for streptomycin sulfate while simultaneously maintaining antibacterial efficacy and bioactive performance. These results illustrate the importance of STRS–BG/CH scaffolds as a promising antibacterial bioactive scaffold system, warranting further biological investigation.
Open AccessStructure–Property Relationships in Streptomycin Sulfate–Incorporated Bioactive Glass/Chitosan Composite Scaffold: Physicochemical and Antibacterial Insights
In this study, a streptomycin sulfate-loaded bioactive glass/chitosan (STRS–BG/CH) composite scaffold was fabricated via an improved unidirectional freeze-drying method, with drug loadings of 20–40%. The scaffolds were investigated by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray analysis before and after in vitro testing. Antibacterial efficacy was evaluated against Gram-positive (Enterococcus faecalis, Staphylococcus aureus) and Gram-negative (Klebsiella pneumoniae, Escherichia coli) microorganisms via the agar diffusion method. The STRS–BG/CH scaffolds exhibited highly interconnected porous structures, prolonged antibacterial activity, and enhanced apatite-forming ability in vitro. Compared with bead-based carriers, scaffold-based systems provide enhanced structural integrity and interconnected porosity, which are advantageous for sustained drug release, apatite formation, and tissue integration. Accordingly, these multifunctional scaffolds may simultaneously provide localized antibacterial activity and potential relevance to bone tissue engineering applications. The prepared STRS–BG/CH scaffolds functioned as controlled release carriers for streptomycin sulfate while simultaneously maintaining antibacterial efficacy and bioactive performance. These results illustrate the importance of STRS–BG/CH scaffolds as a promising antibacterial bioactive scaffold system, warranting further biological investigation.
- Open Access
- 14 May 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (10) , 601
Electrical, Optical, and Anti-Microbial Behavior of Copper Nitrates-Doped Chitosan
Chitosan-based copper composites have attracted considerable interest for biomedical and antimicrobial uses due to their biocompatibility, adjustable dielectric characteristics, and ion-mediated antimicrobial effectiveness. In this study, chitosan films doped with Cu(NO3)2, containing 3, 6, and 9 wt% of copper nitrate were produced using a solution-casting method at room temperature. This was done to explore the relationship between structural interactions, dielectric relaxation, optical properties, and antimicrobial efficacy. The resulting composite has been investigated physically using FTIR, XRD, optical analysis, and dielectric spectroscopy, and biologically for its antimicrobial activity. FTIR revealed the molecular structure of Cs-Cu(NO3)2 and changes resulting from new bond(s) formation and/or decomposition. XRD indicated that there are no peaks assigned for CuO, which weakens the composite antimicrobial activity. Optical analysis showed an increase in the band gap with copper (II) nitrate concentration over 3%. Additionally, the electrical impedance of the resulting composite increased by approximately one decade. A detailed electrical analysis of the charge-carrier types is provided. Moreover, the antimicrobial activity of chitosan is slightly enhanced by the additive copper (II) nitrate in a dose-dependent manner. The current research offers a mechanistic understanding of the structure–property relationships that govern the behavior of Cu(NO3)2–chitosan composites, emphasizing the significant influence of processing conditions on adapting of their dielectric and biological properties.
- 14 May 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (10) , 601
Open AccessElectrical, Optical, and Anti-Microbial Behavior of Copper Nitrates-Doped Chitosan
Chitosan-based copper composites have attracted considerable interest for biomedical and antimicrobial uses due to their biocompatibility, adjustable dielectric characteristics, and ion-mediated antimicrobial effectiveness. In this study, chitosan films doped with Cu(NO3)2, containing 3, 6, and 9 wt% of copper nitrate were produced using a solution-casting method at room temperature. This was done to explore the relationship between structural interactions, dielectric relaxation, optical properties, and antimicrobial efficacy. The resulting composite has been investigated physically using FTIR, XRD, optical analysis, and dielectric spectroscopy, and biologically for its antimicrobial activity. FTIR revealed the molecular structure of Cs-Cu(NO3)2 and changes resulting from new bond(s) formation and/or decomposition. XRD indicated that there are no peaks assigned for CuO, which weakens the composite antimicrobial activity. Optical analysis showed an increase in the band gap with copper (II) nitrate concentration over 3%. Additionally, the electrical impedance of the resulting composite increased by approximately one decade. A detailed electrical analysis of the charge-carrier types is provided. Moreover, the antimicrobial activity of chitosan is slightly enhanced by the additive copper (II) nitrate in a dose-dependent manner. The current research offers a mechanistic understanding of the structure–property relationships that govern the behavior of Cu(NO3)2–chitosan composites, emphasizing the significant influence of processing conditions on adapting of their dielectric and biological properties.
- 5 May 2026
- Published by Springer Nature in Naunyn-Schmiedeberg's Archives of Pharmacology
- Vol. 399 (10) , 1-18
Pluronic F127-functionalized cerium fluoride nanocomposite: synthesis, characterization, and its enhanced antibacterial activities
The persistence of pathogenic bacteria, rising antibiotic resistance, and the ongoing need for effective anticancer agents necessitate the development of advanced multifunctional therapeutic strategies. In this study, CeF₃ nanoparticles and PF127-functionalized CeF₃ (CeF₃–PF127) nanocomposites were synthesized via a facile wet chemical route and systematically characterized for their structural, optical, and biological properties. XRD confirmed the formation of phase-pure hexagonal CeF₃ with crystallite sizes of 31 nm (CeF₃) and 27 nm (CeF₃–PF127), while SAED revealed lattice fringes of approximately 0.27 nm (CeF₃) and 0.29 nm (CeF₃–PF127). EDAX and XPS validated the Ce/F stoichiometry and the successful surface functionalization with PF127. Optical analyses showed a slight reduction in band gap from 3.15 to 3.09 eV upon polymer coating, and PL spectra indicated enhanced defect-related emission in CeF₃–PF127, suggesting stabilization of Ce3⁺ ions and oxygen vacancy sites. Biological evaluations demonstrated that CeF₃–PF127 exhibited superior antioxidant activity (DPPH assay) and enhanced anticancer efficacy against MG-63 osteosarcoma cells, with lower IC₅₀ values over 24–72 h. Antibacterial studies against S. aureus, B. subtilis, K. pneumoniae, and S. dysenteriae revealed larger inhibition zones (18–20.5 mm) and improved MIC/MBC values (600/1000 µg·mL−1) compared to bare CeF₃. Biocompatibility assessment using L929 fibroblasts confirmed cell viability exceeding 80% for both samples. Collectively, these results demonstrate that CeF₃–PF127 is a stable, multifunctional nanocomposite with promising potential for biomedical applications.
- 5 May 2026
- Published by Springer Nature in Naunyn-Schmiedeberg's Archives of Pharmacology
- Vol. 399 (10) , 1-18
Pluronic F127-functionalized cerium fluoride nanocomposite: synthesis, characterization, and its enhanced antibacterial activities
The persistence of pathogenic bacteria, rising antibiotic resistance, and the ongoing need for effective anticancer agents necessitate the development of advanced multifunctional therapeutic strategies. In this study, CeF₃ nanoparticles and PF127-functionalized CeF₃ (CeF₃–PF127) nanocomposites were synthesized via a facile wet chemical route and systematically characterized for their structural, optical, and biological properties. XRD confirmed the formation of phase-pure hexagonal CeF₃ with crystallite sizes of 31 nm (CeF₃) and 27 nm (CeF₃–PF127), while SAED revealed lattice fringes of approximately 0.27 nm (CeF₃) and 0.29 nm (CeF₃–PF127). EDAX and XPS validated the Ce/F stoichiometry and the successful surface functionalization with PF127. Optical analyses showed a slight reduction in band gap from 3.15 to 3.09 eV upon polymer coating, and PL spectra indicated enhanced defect-related emission in CeF₃–PF127, suggesting stabilization of Ce3⁺ ions and oxygen vacancy sites. Biological evaluations demonstrated that CeF₃–PF127 exhibited superior antioxidant activity (DPPH assay) and enhanced anticancer efficacy against MG-63 osteosarcoma cells, with lower IC₅₀ values over 24–72 h. Antibacterial studies against S. aureus, B. subtilis, K. pneumoniae, and S. dysenteriae revealed larger inhibition zones (18–20.5 mm) and improved MIC/MBC values (600/1000 µg·mL−1) compared to bare CeF₃. Biocompatibility assessment using L929 fibroblasts confirmed cell viability exceeding 80% for both samples. Collectively, these results demonstrate that CeF₃–PF127 is a stable, multifunctional nanocomposite with promising potential for biomedical applications.
- Open Access
- 25 April 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (9) , 521
Economic Design of a Novel Magnetic ZnO-Doped Biocomposite: An Integrated Advanced Ionic Theory and Statistical Physics Approach for Cr(VI) and Hg(II) Remediation
A previously unexplored magnetic biocomposite (CMC-HSDs/Fe3O4) was developed through the valorization of hydrophobic scleroprotein discards (HSDs). The synthesized material was evaluated for its efficacy in the adsorption of Cr(VI) and Hg(II) ions from contaminated aqueous systems. The physicochemical properties of the synthesized CMC-HSDs/Fe3O4 nanocomposite were characterized using XRD, FTIR, BET, TG/DTG, FESEM, EDX, and elemental mapping. Subsequently, a Box–Behnken experimental design was employed to model and optimize the adsorption process for Cr(VI) and Hg(II), focusing on the critical parameters of solution pH, adsorbent dosage, and interaction time. Kinetic data were best fitted to the pseudo-first-order (PFO) model. Equilibrium isotherm analysis revealed that Cr(VI) adsorption followed the Langmuir model, while Hg(II) adsorption was better fitted by the Freundlich model. Advanced ionic calculations elucidated a consistent multimolecular adsorption mechanism for both ions, characterized by temperature invariance and a preferential vertical geometry of the adsorbed species. Through a production cost of 25.56 USD/kg, the biosorbent demonstrates excellent reusability, retaining 88.60% efficiency for Cr(VI) and 85.69% for Hg(II) after five adsorption–desorption cycles. Based on a 50 mg/L influent concentration, projected treatment costs are ~$3.50/100 L for Cr(VI) and ~$1.22/100 L for Hg(II), underscoring the nanocomposite’s economic feasibility for industrial deployment in advanced tertiary wastewater remediation.
- 25 April 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (9) , 521
Open AccessEconomic Design of a Novel Magnetic ZnO-Doped Biocomposite: An Integrated Advanced Ionic Theory and Statistical Physics Approach for Cr(VI) and Hg(II) Remediation
A previously unexplored magnetic biocomposite (CMC-HSDs/Fe3O4) was developed through the valorization of hydrophobic scleroprotein discards (HSDs). The synthesized material was evaluated for its efficacy in the adsorption of Cr(VI) and Hg(II) ions from contaminated aqueous systems. The physicochemical properties of the synthesized CMC-HSDs/Fe3O4 nanocomposite were characterized using XRD, FTIR, BET, TG/DTG, FESEM, EDX, and elemental mapping. Subsequently, a Box–Behnken experimental design was employed to model and optimize the adsorption process for Cr(VI) and Hg(II), focusing on the critical parameters of solution pH, adsorbent dosage, and interaction time. Kinetic data were best fitted to the pseudo-first-order (PFO) model. Equilibrium isotherm analysis revealed that Cr(VI) adsorption followed the Langmuir model, while Hg(II) adsorption was better fitted by the Freundlich model. Advanced ionic calculations elucidated a consistent multimolecular adsorption mechanism for both ions, characterized by temperature invariance and a preferential vertical geometry of the adsorbed species. Through a production cost of 25.56 USD/kg, the biosorbent demonstrates excellent reusability, retaining 88.60% efficiency for Cr(VI) and 85.69% for Hg(II) after five adsorption–desorption cycles. Based on a 50 mg/L influent concentration, projected treatment costs are ~$3.50/100 L for Cr(VI) and ~$1.22/100 L for Hg(II), underscoring the nanocomposite’s economic feasibility for industrial deployment in advanced tertiary wastewater remediation.
- 19 April 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 362, 152126
Antibacterial performance of chitosan-modified magnesium fluoride nanoparticles: Synthesis and characterization
- 19 April 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 362, 152126
Antibacterial performance of chitosan-modified magnesium fluoride nanoparticles: Synthesis and characterization
- Open Access
- 3 April 2026
- Published by MDPI AG in Preprints.org
Carbon Footprints of Wastewater Treatment Plants: A Comprehensive Analysis of Emission Sources and Quantification for Sequencing Batch Reactor System
Wastewater treatment plants (WWTPs) are significant contributors to anthropogenic greenhouse gas (GHG) emissions through both direct biological processes generating methane (CH₄), nitrous oxide (N₂O), and biogenic carbon dioxide (CO₂) and indirect energy consumption. This comprehensive research paper synthesizes findings from 30 peer-reviewed studies to present a holistic analysis of carbon footprints in wastewater treatment, with a specific quantitative assessment of a sequencing batch reactor (SBR) facility processing 5,000 m³/day. The analysis reveals that N₂O emissions can constitute up to 75% of a plant's carbon footprint, while aeration accounts for 40–75% of the total energy consumption. The carbon footprint of WWTPs varies by treatment technology, scale, and operational conditions, ranging from 61 to 161 kg CO₂e per population equivalent (PE) annually. For the 5,000 m³/day SBR facility, baseline emissions range from 365 to 1, 095 tCO₂e annually and can be reduced by 30–50% through anaerobic digestion with biogas recovery and anoxic phase optimization. The findings underscore that achieving carbon neutrality requires extending accounting beyond plant boundaries to include effluent exports, sludge management, and urban infrastructure integration. This paper provides a unified framework for understanding, quantifying, and mitigating carbon emissions from wastewater treatment, with particular emphasis on SBR technology.
- 3 April 2026
- Published by MDPI AG in Preprints.org
Open AccessCarbon Footprints of Wastewater Treatment Plants: A Comprehensive Analysis of Emission Sources and Quantification for Sequencing Batch Reactor System
Wastewater treatment plants (WWTPs) are significant contributors to anthropogenic greenhouse gas (GHG) emissions through both direct biological processes generating methane (CH₄), nitrous oxide (N₂O), and biogenic carbon dioxide (CO₂) and indirect energy consumption. This comprehensive research paper synthesizes findings from 30 peer-reviewed studies to present a holistic analysis of carbon footprints in wastewater treatment, with a specific quantitative assessment of a sequencing batch reactor (SBR) facility processing 5,000 m³/day. The analysis reveals that N₂O emissions can constitute up to 75% of a plant's carbon footprint, while aeration accounts for 40–75% of the total energy consumption. The carbon footprint of WWTPs varies by treatment technology, scale, and operational conditions, ranging from 61 to 161 kg CO₂e per population equivalent (PE) annually. For the 5,000 m³/day SBR facility, baseline emissions range from 365 to 1, 095 tCO₂e annually and can be reduced by 30–50% through anaerobic digestion with biogas recovery and anoxic phase optimization. The findings underscore that achieving carbon neutrality requires extending accounting beyond plant boundaries to include effluent exports, sludge management, and urban infrastructure integration. This paper provides a unified framework for understanding, quantifying, and mitigating carbon emissions from wastewater treatment, with particular emphasis on SBR technology.
- Open Access
Optimized Ultrafiltration Membrane Based on Acrylic Fiber Waste for Organic Compounds Removal from Wastewater
This study reports the development of an optimized tight ultrafiltration (UF) membrane prepared from recycled acrylic fiber (polyacrylonitrile, PAN) waste for the efficient removal of organic pollutants from water. Membranes were fabricated using different concentrations of acrylic fiber waste to examine the influence of polymer content on their morphology and performance. The prepared membranes were characterized using scanning electron microscopy (SEM), porosity measurements, contact angle analysis, and mechanical strength testing to evaluate their structural and physicochemical properties. Among the tested formulations, membrane M4, containing 22.5 wt.% acrylic fiber waste, shows the most balanced performance, high mechanical integrity, and good surface hydrophilicity, with a contact angle of about 52° and porosity of 27%. The optimized M4 membrane demonstrates excellent pure water flux of 65 LMH. M4 achieves a flux recovery ratio (FRR) above 80%. Its performance was further evaluated for the removal of humic acid (HA) and paracetamol as a model of organic contaminants. The results also demonstrate strong chemical stability under acidic and basic conditions, highlighting the potential of recycled acrylic fiber waste as a sustainable polymer source for high-performance tight UF membranes. This approach offers an environmentally friendly and cost-effective solution for water purification and pharmaceutical contaminant removal.
Open AccessOptimized Ultrafiltration Membrane Based on Acrylic Fiber Waste for Organic Compounds Removal from Wastewater
This study reports the development of an optimized tight ultrafiltration (UF) membrane prepared from recycled acrylic fiber (polyacrylonitrile, PAN) waste for the efficient removal of organic pollutants from water. Membranes were fabricated using different concentrations of acrylic fiber waste to examine the influence of polymer content on their morphology and performance. The prepared membranes were characterized using scanning electron microscopy (SEM), porosity measurements, contact angle analysis, and mechanical strength testing to evaluate their structural and physicochemical properties. Among the tested formulations, membrane M4, containing 22.5 wt.% acrylic fiber waste, shows the most balanced performance, high mechanical integrity, and good surface hydrophilicity, with a contact angle of about 52° and porosity of 27%. The optimized M4 membrane demonstrates excellent pure water flux of 65 LMH. M4 achieves a flux recovery ratio (FRR) above 80%. Its performance was further evaluated for the removal of humic acid (HA) and paracetamol as a model of organic contaminants. The results also demonstrate strong chemical stability under acidic and basic conditions, highlighting the potential of recycled acrylic fiber waste as a sustainable polymer source for high-performance tight UF membranes. This approach offers an environmentally friendly and cost-effective solution for water purification and pharmaceutical contaminant removal.
- Open Access
Microwave-Assisted Syntheses of 1-Acetyl 2-Methylbenzimidazole Sodium Bisulfate pH-Responsive Ionic Draw Solute for Forward Osmosis Applications
This work is related to the development of a highly efficient pH-responsive ionic draw solute for forward osmosis applications utilizing microwave-assisted fast heating. This solute is classified as an ionic compound, a sodium salt originating from imidazole, with the scientific acronym 1-acetyl-2-methylbenzimidazole sodium bisulfate (AMBIM-Na). The synthesized compound was analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), as well as additional physical characteristics. The baseline performance was initially evaluated at various molar concentrations against distilled water as the feed solution (FS). The results indicated that the produced solute exhibits elevated osmotic pressure, resulting in a water flux of up to 130 LMH for a 1 M concentration, coupled with the absence of reverse salt flux. The synthesized AMBIM-Na at a concentration of 1 M was utilized as a draw solution (DS) against synthetic brackish water. The water flux declined progressively with the increase in FS concentration, decreasing from 130 LMH with distilled water to 99, 70, and 41 LMH at NaCl concentrations of 5, 10, and 15 g/L, respectively. The regeneration of the draw solute was assessed using pH adjustment, revealing that 100% regeneration occurs by reducing the pH to 2.
Open AccessMicrowave-Assisted Syntheses of 1-Acetyl 2-Methylbenzimidazole Sodium Bisulfate pH-Responsive Ionic Draw Solute for Forward Osmosis Applications
This work is related to the development of a highly efficient pH-responsive ionic draw solute for forward osmosis applications utilizing microwave-assisted fast heating. This solute is classified as an ionic compound, a sodium salt originating from imidazole, with the scientific acronym 1-acetyl-2-methylbenzimidazole sodium bisulfate (AMBIM-Na). The synthesized compound was analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), as well as additional physical characteristics. The baseline performance was initially evaluated at various molar concentrations against distilled water as the feed solution (FS). The results indicated that the produced solute exhibits elevated osmotic pressure, resulting in a water flux of up to 130 LMH for a 1 M concentration, coupled with the absence of reverse salt flux. The synthesized AMBIM-Na at a concentration of 1 M was utilized as a draw solution (DS) against synthetic brackish water. The water flux declined progressively with the increase in FS concentration, decreasing from 130 LMH with distilled water to 99, 70, and 41 LMH at NaCl concentrations of 5, 10, and 15 g/L, respectively. The regeneration of the draw solute was assessed using pH adjustment, revealing that 100% regeneration occurs by reducing the pH to 2.