LNLei Ni

Lei Ni

*This is an algorithmically generated author record based on publicly available information.

Lei Ni has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research and Experimentation on Sparse–Dense Interphase Curved-Tooth Sorghum Threshing Technology

    by Jie Ma, Qinghao He, Duanyang Geng, Lin Niu, Yipeng Cui, Qiming Yu, Jianning Yin, Yang Wang, Lei Ni

    The high-speed development of the liquor industry brings sorghum demand, which is increasingly strong at the moment. Still, its harvesting mechanization level is low, and with the design of a longitudinal flow sparse and dense curved-teeth sorghum threshing technology, the harvester’s work quality is improved by the reduction of seed impurities. This article describes the working principle of the harvester, the overall distribution of threshing elements, and force analysis of the threshing aspects to determine the structure of the threshing elements. The orthogonal test was carried out, with a sparse–dense interphase threshing drum as the research object, selecting operating speed, threshing element bending angle, and threshing element mounting angle as the test factors, with the entrainment loss rate and the net threshing rate as the assessment indexes for the three-factor, three-level test, and the use of Design-Expert to establish a mathematical regression model between the factors and the two indicators, resulting in the following optimized parameters: when the operating speed is 1.0 m·s−1, the bending angle of the threshing element is 80°, and the mounting angle of the threshing element is 45°, the loss rate of entrainment is 1.89%, and the net threshing rate is 95.53%. The machine’s design indexes are in line with relevant national standards and can meet the demand for mechanized harvesting of sorghum.


  • Open Access

    Design and Experiment of Grain Lifter for Sorghum Harvester

    by Qinghao He, Qihuan Wang, Duanyang Geng, Duanxin Li, Lin Niu, Jie Ma, Ce Zhang, Jiarui Ming, Lei Ni

    In order to solve the problems of grain lifter in sorghum harvesting, such as ear loss and serious crop leakage loss, combined with the physical and mechanical characteristics of sorghum, the segmented and reverse spiral grain lifter for sorghum harvesting and cutting table was developed, and the design method of the main structural parameters of the grain lifter was determined. The comparative test of the working effect of the clasp showed that the working effect of the cutting table with the clasp was better than that without the clasp, which effectively reduced the harvest loss of the cutting table. By using Box–Behnken experimental design method, the influence law of forward speed, tilt angle, and rotation speed of grain lifter on the rate of ear loss and harvest loss in sorghum harvesting was investigated. The regression mathematical model and response surface of the rate of ear loss and harvest loss and analysis factors were established, and the optimal working parameters of the grain lifter were determined. The forward speed was 0.8 m/s, the tilt angle of the grain lifter was 28°, and the rotation speed of the grain lifter was 330 r/min. Under these conditions, the spike loss rate was 2.01, the leakage loss rate was 2.19, and the error with the theoretical value was less than 3%, which proved the rationality of the optimized combination parameters. In the harvest of crooked and fallen sorghum, the grain lifter can effectively reduce the loss of sorghum head drop and lodging leakage, ensure the reliability of the cutting table, and achieve low loss and efficient harvest of sorghum.