Sean Adam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sean Adam has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Conrad Jackisch
Interdisciplinary Environmental Research Centre, Technische Universität Bergakademie Freiberg, Freiberg, 09599, Germany
8 shared publications - Anita Alexandra Sanchez
Interdisciplinary Environmental Research Centre, Technische Universität Bergakademie Freiberg, Freiberg, 09599, Germany
7 shared publications - Maximilian Peter Lau
Interdisciplinary Environmental Research Centre, TU Bergakademie Freiberg, Freiberg, Germany
7 shared publications Sabrina Hedrich
Interdisciplinary Environmental Research Centre, Technische Universität Bergakademie Freiberg, Freiberg, 09599, Germany
7 shared publicationsAbdul M. Mouazen
1 shared publicationAndrew Margenot
1 shared publication
Latest Publications
- Open Access
- 17 February 2026
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 30 (4) , 945-963
Hotspots and hot moments of metal mobilization: dynamic connectivity in legacy mine waters
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings in terms of temporal increases in concentration and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, the Pollution Load Index (PLI), and hydrological concepts to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q patterns reveal site- and element-specific shifts in flow path activation in a very short time. Low flow periods are often considered low risk for contaminant mobilization, yet contaminant hotspots within poorly connected hydrological zones can emerge during these times. The resulting high pollution potential and solute accumulation are governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by fill-and-spill and lotic-lentic cycle concepts. Notably, Zn loads (in terms of flux) during low flow, pre-flush periods reached values up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occurring during low flow and especially just before the high flow (flush) period, source-related, decentralized water treatment structures become much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- 17 February 2026
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 30 (4) , 945-963
Open AccessHotspots and hot moments of metal mobilization: dynamic connectivity in legacy mine waters
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings in terms of temporal increases in concentration and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, the Pollution Load Index (PLI), and hydrological concepts to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q patterns reveal site- and element-specific shifts in flow path activation in a very short time. Low flow periods are often considered low risk for contaminant mobilization, yet contaminant hotspots within poorly connected hydrological zones can emerge during these times. The resulting high pollution potential and solute accumulation are governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by fill-and-spill and lotic-lentic cycle concepts. Notably, Zn loads (in terms of flux) during low flow, pre-flush periods reached values up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occurring during low flow and especially just before the high flow (flush) period, source-related, decentralized water treatment structures become much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- Open Access
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-27
Reply to Editor and Referees
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-27
Open AccessReply to Editor and Referees
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- Open Access
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-27
Reply on RC2
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- 30 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-27
Open AccessReply on RC2
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- Open Access
- 1 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-27
Reply on RC1
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- 1 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-27
Open AccessReply on RC1
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- Open Access
- 26 September 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-27
Comment on egusphere-2025-4092
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- 26 September 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-27
Open AccessComment on egusphere-2025-4092
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- Open Access
- 29 August 2025
- Published by Copernicus GmbH
Supplementary material to "Hotspots and hot moments of metal mobilization: dynamic connectivity in legacy mine waters"
- 29 August 2025
- Published by Copernicus GmbH
Open AccessSupplementary material to "Hotspots and hot moments of metal mobilization: dynamic connectivity in legacy mine waters"
- Open Access
- 29 August 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-27
Hotspots and hot moments of metal mobilization: dynamic connectivity in legacy mine waters
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- 29 August 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-27
Open AccessHotspots and hot moments of metal mobilization: dynamic connectivity in legacy mine waters
Monitoring and treatment of contaminated mine water conventionally focuses on end-of-pipe assessment and remediation techniques, at the downstream outlet of mining sites after closure. Conversely, the initial stages of pollutant release and their pathways within abandoned mines have been largely overlooked. This study examines subsurface mining-affected anthropogenic structures and the dynamic hydrogeochemical loadings and drainage pathways within them, revealing how variable subsurface flow activation impacts metal(loid) mobilization and opens novel direct mitigation options. We identified complex hydrological patterns through the mine (Reiche Zeche, Ore Mountains, Germany) in which percolation paths were dynamically connected to the drainage based on flow conditions. Using in-situ sensors, hydrogeochemical monitoring and stable water isotopes, we reveal a hydrodynamic regime in which episodic shifts in subsurface connectivity govern metal(loid) mobilization from localized storage zones, ultimately controlling solute export to surface waters. We use concentration–discharge (C–Q) relationships, hysteresis indices, and the Pollution Load Index (PLI) to evaluate metal transport during the annual pattern of flow regimes. Our analyses of event-scale C–Q hysteresis patterns reveal site- and element-specific shifts in flow path activation in a very short time. Despite low flow periods traditionally considered low risk for contaminant mobilization, contaminant hotspots within poorly connected hydrological zones can emerge during these times, with high pollution potential and solute accumulation governed by the sequence and timing of crossing or exceeding a connectivity or flow threshold, as described by the hydrological fill-and-spill and geochemical lotic-lentic cycle concepts. Notably, Zn loads during low flow, pre-flush periods reached levels up to six times higher than median values. Preceding the flushing events, geochemical and microbial-mediated metal leaching create the spatially distributed contaminant stock, remobilized during reconnection events. With a large proportion of heavy metal loads occur during low flow and especially just before the high flow (flush) period, source-related mitigation with decentralized water treatment structures becomes much more feasible than end-of-pipe solutions that require higher throughput volumes and multi-element filtering. This work also highlights the need for event-sensitive monitoring and treatment strategy options that prioritize internal system behavior to mitigate pollution risk in abandoned mines and other caverned hydrological systems.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Rapid analysis using Diffuse Reflectance Spectroscopy can enhance Soil Carbon Monitoring
To gain a better understanding of changes in soil carbon stocks and composition it is essential to have data on relevant soil properties with high temporal and spatial resolution. However, traditional laboratory analysis can be both time-consuming and expensive, ultimately limiting data availability. Mid-DRIFTS (Diffuse Reflectance Infrared Fourier Transformed Spectroscopy in the mid-IR range) is a cost-effective alternative to conventional analytical methods. It enables the simultaneous inference of multiple soil properties, such as soil organic carbon, nitrogen and phosphorus content, soil texture, and cation exchange capacity, from measured spectra. This makes it a valuable analytical tool for soil monitoring.To successfully integrate mid-DRIFTS into a soil monitoring concept, a spectral library representative of the target is required as the basis for multivariate or machine-learning-based calibration models. Here, we want to present the initial results obtained using the BDF-SSL, a soil spectral library we created as the foundation for integrating mid-DRIFTS in agricultural soil monitoring in Saxony, Germany. The library's core consists of nearly 300 spectra obtained from retention samples from agricultural soil monitoring sites in Saxony, which were collected over the past 20 years.We focused on the inference of soil carbon content, including three thermally derived carbon fractions (TOC400, ROC, TIC900) we measured according to DIN19539 by combustion. Additionally, we calibrated models for a wide range of other soil properties, such as soil texture, nitrogen and phosphorus content, elemental concentrations and cation exchange capacity. We used both Partial Least Squares Regression (PLSR), Cubist, and the Memory Based Learner (MBL) to calibrate the models.Both Cubist and MBL consistently outperformed PLSR. Our models show high predictive accuracy for the carbon fractions, total nitrogen and phosphorous contents, cation exchange capacity and texture. In addition, we are also able to predict several elemental concentrations, such as Fe, Al, or Ni contents with high accuracy. Our results show that mid-DRIFT can be used to enhance spatial and temporal coverage of soil monitoring, allowing not only for more accurate estimations of soil carbon stocks and sequestration rates, but also for the rapid estimation of several other soil properties.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessRapid analysis using Diffuse Reflectance Spectroscopy can enhance Soil Carbon Monitoring
To gain a better understanding of changes in soil carbon stocks and composition it is essential to have data on relevant soil properties with high temporal and spatial resolution. However, traditional laboratory analysis can be both time-consuming and expensive, ultimately limiting data availability. Mid-DRIFTS (Diffuse Reflectance Infrared Fourier Transformed Spectroscopy in the mid-IR range) is a cost-effective alternative to conventional analytical methods. It enables the simultaneous inference of multiple soil properties, such as soil organic carbon, nitrogen and phosphorus content, soil texture, and cation exchange capacity, from measured spectra. This makes it a valuable analytical tool for soil monitoring.To successfully integrate mid-DRIFTS into a soil monitoring concept, a spectral library representative of the target is required as the basis for multivariate or machine-learning-based calibration models. Here, we want to present the initial results obtained using the BDF-SSL, a soil spectral library we created as the foundation for integrating mid-DRIFTS in agricultural soil monitoring in Saxony, Germany. The library's core consists of nearly 300 spectra obtained from retention samples from agricultural soil monitoring sites in Saxony, which were collected over the past 20 years.We focused on the inference of soil carbon content, including three thermally derived carbon fractions (TOC400, ROC, TIC900) we measured according to DIN19539 by combustion. Additionally, we calibrated models for a wide range of other soil properties, such as soil texture, nitrogen and phosphorus content, elemental concentrations and cation exchange capacity. We used both Partial Least Squares Regression (PLSR), Cubist, and the Memory Based Learner (MBL) to calibrate the models.Both Cubist and MBL consistently outperformed PLSR. Our models show high predictive accuracy for the carbon fractions, total nitrogen and phosphorous contents, cation exchange capacity and texture. In addition, we are also able to predict several elemental concentrations, such as Fe, Al, or Ni contents with high accuracy. Our results show that mid-DRIFT can be used to enhance spatial and temporal coverage of soil monitoring, allowing not only for more accurate estimations of soil carbon stocks and sequestration rates, but also for the rapid estimation of several other soil properties.
- Open Access
An interlaboratory comparison of mid-infrared spectra acquisition: Instruments and procedures matter