Hui Shen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hui Shen has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Bo Liu
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China
2 shared publications - Haibo Li
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China
2 shared publications Tingting Liu
2 shared publicationsBo Liu
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, China
1 shared publication- Bo Peng
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, Hubei, China
1 shared publication Chang Xiang
1 shared publication
Latest Publications
- 24 May 2024
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 57 (10) , 8429-8456
An Improved Method for Estimating Earthquake-Induced Permanent Displacement of Bedding Rock Slopes
- 24 May 2024
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 57 (10) , 8429-8456
An Improved Method for Estimating Earthquake-Induced Permanent Displacement of Bedding Rock Slopes
- Open Access
- 12 December 2023
- Published by Wiley in Shock and Vibration
- Vol. 2023, 1-21
Topographic Effects on the Seismic Response of Trapezoidal Canyons Subjected to Obliquely Incident SV Waves
The topography and the incident angle of seismic waves both have considerable effects on the seismic ground motions of canyons in a half-space. In this paper, the theory of wavefield decomposition and the artificial boundary is used to develop a method for inputting obliquely incident SV waves. Formulas for the equivalent nodal forces applied to the truncated boundary are derived and implemented in the finite element method. The validity of the proposed method is verified by a test case. A parametric study is then performed to investigate the influence of canyon geometry and incident angle of SV waves on the seismic response of trapezoidal canyons. The numerical results indicate that the canyon inclination has a more significant effect on the ground motion amplification than its height and width. The amplification effects are strongly related to the canyon inclination and the incident angle of SV waves. Additionally, the dominant frequency corresponding to the acceleration of the canyon crests is not sensitive to the incident angle of SV waves.
- 12 December 2023
- Published by Wiley in Shock and Vibration
- Vol. 2023, 1-21
Open AccessTopographic Effects on the Seismic Response of Trapezoidal Canyons Subjected to Obliquely Incident SV Waves
The topography and the incident angle of seismic waves both have considerable effects on the seismic ground motions of canyons in a half-space. In this paper, the theory of wavefield decomposition and the artificial boundary is used to develop a method for inputting obliquely incident SV waves. Formulas for the equivalent nodal forces applied to the truncated boundary are derived and implemented in the finite element method. The validity of the proposed method is verified by a test case. A parametric study is then performed to investigate the influence of canyon geometry and incident angle of SV waves on the seismic response of trapezoidal canyons. The numerical results indicate that the canyon inclination has a more significant effect on the ground motion amplification than its height and width. The amplification effects are strongly related to the canyon inclination and the incident angle of SV waves. Additionally, the dominant frequency corresponding to the acceleration of the canyon crests is not sensitive to the incident angle of SV waves.
- Open Access
- 21 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1441
Study on the Degradation Law of Artificial Joint Surfaces with Natural Morphologies under Quasi-Static Cyclic Shearing
In this paper, a series of quasi-static cyclic shear tests were performed on artificial rock joint specimens with natural morphologies at different normal stress levels. After shearing, combined with 3D scanning technology and image processing, the 3D morphology parameter, , of 36 analyzed directions was measured to investigate the damage and degradation laws of the joint surfaces. The polar curves of the roughness parameter shrank from a circular to an elliptical shape, with the shear direction as the minor axis. The roughness degradation rates and the shear cycles were mutually interrelated with the normal stress levels, which had a tendency to be fast initially and then to slow down under higher normal stress. Influenced by the cyclic shear direction, the 3D roughness of the joint surfaces degenerated anisotropically and sustained the most serious damage along the shear direction. Two damage and degradation fitting formulas were proposed, which could aid the assessment of residual roughness under different stress histories and the cumulative wear degree.- 21 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1441
Open AccessStudy on the Degradation Law of Artificial Joint Surfaces with Natural Morphologies under Quasi-Static Cyclic Shearing
In this paper, a series of quasi-static cyclic shear tests were performed on artificial rock joint specimens with natural morphologies at different normal stress levels. After shearing, combined with 3D scanning technology and image processing, the 3D morphology parameter, , of 36 analyzed directions was measured to investigate the damage and degradation laws of the joint surfaces. The polar curves of the roughness parameter shrank from a circular to an elliptical shape, with the shear direction as the minor axis. The roughness degradation rates and the shear cycles were mutually interrelated with the normal stress levels, which had a tendency to be fast initially and then to slow down under higher normal stress. Influenced by the cyclic shear direction, the 3D roughness of the joint surfaces degenerated anisotropically and sustained the most serious damage along the shear direction. Two damage and degradation fitting formulas were proposed, which could aid the assessment of residual roughness under different stress histories and the cumulative wear degree. - Open Access
- 29 November 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (23) , 8540
Study on Mechanical Properties of the Basalt Fiber-Rubber Granular Concrete under Triaxial Stress Condition and Its Application
To reduce the failure probability of rigid supporting structures caused by large deformation of deeply buried high-stress soft rock roadways, the mechanical properties and failure features of basalt fiber-rubber granular concrete (BFRGC) are investigated based on triaxial compression tests. The post-peak strain softening equations of BFRGC, based on the Mohr–Coulomb yield criterion, are deduced and then compiled in the finite-difference software (FLAC3D) to simulate the post-peak strain-softening process of BFRGC. Combined with practical engineering, the supporting effects of BFRGC with different proportions are evaluated by FLAC3D. The results of compression tests show that the yield strength of the BFRGC increases significantly when the mass percentage of basalt fiber is 0.4%. Moreover, mixing basalt fibers into both the plain concrete and rubber concrete can effectively restrain the development of the fractures under three-dimensional stress. The numerical results show that when the mass fractions of basalt fibers and rubber particles are 0.4% and 5–10%, respectively, both the plastic zone in the surrounding rocks and the deformation of the rigid supporting structures decrease obviously. It is indicated that the optimal ratio of BFRGC can effectively reduce the stress concentration around the roadway and improve the overall bearing capacity of the supporting structures.
- 29 November 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (23) , 8540
Open AccessStudy on Mechanical Properties of the Basalt Fiber-Rubber Granular Concrete under Triaxial Stress Condition and Its Application
To reduce the failure probability of rigid supporting structures caused by large deformation of deeply buried high-stress soft rock roadways, the mechanical properties and failure features of basalt fiber-rubber granular concrete (BFRGC) are investigated based on triaxial compression tests. The post-peak strain softening equations of BFRGC, based on the Mohr–Coulomb yield criterion, are deduced and then compiled in the finite-difference software (FLAC3D) to simulate the post-peak strain-softening process of BFRGC. Combined with practical engineering, the supporting effects of BFRGC with different proportions are evaluated by FLAC3D. The results of compression tests show that the yield strength of the BFRGC increases significantly when the mass percentage of basalt fiber is 0.4%. Moreover, mixing basalt fibers into both the plain concrete and rubber concrete can effectively restrain the development of the fractures under three-dimensional stress. The numerical results show that when the mass fractions of basalt fibers and rubber particles are 0.4% and 5–10%, respectively, both the plastic zone in the surrounding rocks and the deformation of the rigid supporting structures decrease obviously. It is indicated that the optimal ratio of BFRGC can effectively reduce the stress concentration around the roadway and improve the overall bearing capacity of the supporting structures.