LTLirong Tang

Lirong Tang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lirong Tang has a total of 59 co-authors. Here are the top co-authors by number of shared publications:

  • Biao Huang

    College of Material Engineering Fujian Agriculture and Forestry University Fujian China

    5 shared publications
  • Biao Huang

    Fujian Agriculture and Forestry University

    5 shared publications
  • Beili Lu

    College of Material Engineering Fujian Agriculture and Forestry University Fujian China

    4 shared publications
  • Fengcai Lin

    Fujian Engineering and Research Center of New Chinese Lacquer Materials College of Materials and Chemical Engineering Minjiang University Fuzhou China

    4 shared publications
  • Jianhua Lv

    College of Material Engineering Fujian Agriculture and Forestry University Fujian China

    4 shared publications
  • Xinda You

    College of Material Engineering Fujian Agriculture and Forestry University Fujian China

    4 shared publications

Latest Publications

  • A Creative Experimental Design Using Multiple Tools in Graduate Engineering Education Course in China

    by Hainan Huang, Zhaohui Zhu, Zeyu Wu, Xiaofeng Li, Lirong Tang

    Experimental engineering education in transportation increasingly requires students to integrate field data acquisition, data processing, programming, and engineering interpretation. This study describes and evaluates a multi‐tool experimental workflow implemented in a graduate Traffic Flow Theory course in China. Centered on vehicle lane‐change analysis, the activity combined UAV‐based traffic‐video acquisition, video processing and trajectory extraction using Adobe Premiere Pro and Tracker, Python‐based lane assignment and lane‐change identification, and MATLAB‐based visualization and interpretation. Educational outcomes were evaluated using a historical cohort comparison involving 30 pre‐reform students in 2021 and 100 post‐reform students from 2022 to 2024. An 18‐item course‐specific questionnaire and course‐performance data were analyzed using Welch's independent‐samples t ‐tests, Fisher's exact tests, and Hedges' g effect sizes. The post‐reform cohorts reported a higher overall self‐reported ability score than the pre‐reform cohort (87.77 vs. 76.83; mean difference 10.94, 95% CI 8.70–13.17; p < 0.001; g = 2.65). Mean total course scores were also higher (82.96 vs. 74.95; mean difference 8.01, 95% CI 3.57–12.43; p < 0.001; g = 0.83), while overall satisfaction increased from 46.7% to 89.0% ( p < 0.001). These findings indicate that the integrated workflow was practically implementable and was associated with higher student‐reported competencies and course performance. The proposed workflow provides a reproducible framework for integrating field observation, computational tools, and traffic‐flow interpretation in graduate transportation education.

  • Open Access

    Bioinspired Microphase‐Engineered Binders for Silicon Anodes

    by Lirong Tang, Lan Zhao, Zhiyi Cao, Fengcai Lin, Biao Huang, Haijun Li, Lingling Qian, Yingshan Shi, Yaohang Weng, Xuan Yang, et al.

    Silicon anodes require binders that not only buffer volume changes but also preserve interfacial integrity. However, excessive encapsulation limits ion transport and long–term stability. Here, we develop a lipoic acid–rosin acrylate (LRA) binder via thiol–ene click chemistry. LRA exhibits high stretchability (4154%) and self–assembles into chain motifs, forming microphase arrangements in aqueous media. Incorporated into hinged–tethering phosphorylated cellulose nanocrystals (HT–PCNCs) and ionically crosslinked alginate–Ba 2 + scaffolds, these motifs cluster into mesoscale domains, reminiscent of the armor plates of Phloeodes diabolicus . This hybrid structure integrates rigid backbones with deformable rosin–rich beads, enabling localized strain dissipation, self–repair, and regulated ion conduction for stable solid electrolyte interphase (SEI) formation. The elastic mosaic dispersed within HT–PCNCs/SA–Ba 2 + provides mechanical robustness and ionic accessibility. The composite binder achieves a tensile strength of 308.52 MPa, fracture energy of 3288.48 MJ m − 3 , and ionic conductivity of 33.607 mS cm − 1 , while effectively suppressing interfacial cracks. Silicon electrodes deliver 83.25% capacity retention after 100 cycles, high rate capability (869.8 mAh g − 1 at 3C), and long‐term durability (1798 mAh g − 1 after 300 cycles), accompanied by an ultrathin (∼17 nm) LiF–rich SEI. This work highlights spatially resolved microphase engineering as a promising strategy for adaptive bio–based binders in silicon anodes.


  • Entropy–Driven Dual–Channel Dissipative Binder for Strain–Responsive Reinforcement and Stable Silicon Anodes

    by Lan Zhao, Fengcai Lin, Haijun Li, Lingling Qian, Yingshan Shi, Zhiyi Cao, Xuan Yang, Biao Huang, Beili Lu, Hanyang Liu, et al.

    Dissipative smart binders hold great potential for flexible electronics and energy storage, but achieving synergistic regulation between energy dissipation and structural reinforcement remains challenging, particularly in balancing high strength, tunable toughness, and multifunctional integration. Here, a dissipative smart binder with a dual‐channel responsive mechanism is developed to enable dynamic regulation of energy dissipation and rigidity enhancement through the synergistic effects of slip relaxation and conformational locking. Centered on Fe 2 ⁺/Fe 3 ⁺ dynamic coordination, the binder incorporates control via the intricate and rigid rosin architecture and a hierarchy of distinct bonding mechanisms, thereby enhancing its capacity for both rapid energy dissipation and strain‐triggered reinforcement. Sodium alginate serves as a continuous phase framework, reinforced by phosphorylated cellulose nanocrystals, conformation‐locking segments of acrylic acid rosin, and a multivalent coordination network that enables this strain‐triggered state transformation. The binder exhibits a soft‐to‐rigid transition with a strain‐rate‐sensitive hardening effect, increasing modulus up to 98 000 times and fracture energy from 104.51 to 272.34 MJ m −3 . Applied in silicon anodes, it maintains 2476.5 mA h g −1 after 100 cycles at 0.2C, with ionic conductivity reaching 25.240 mS cm −1 , an eightfold increase over the unmodified system. The composite network effectively mitigates structural degradation, binder fatigue, and interfacial instability caused by silicon volume expansion.


  • Open Access

    Different smoking processes with the special fuel rods: Impart a smoky aroma to Souchong black tea

    by Weisu Tian, Jiao Feng, Jinyuan Wang, Hongzheng Lin, Qianlian Chen, Jiayun Zhuang, Guanjun Pan, Jiake Zhao, Lirong Tang, Zhilong Hao


  • Biomass‐Derived Carbon Materials for Smart Electronics: Insights from Wood Pitch‐based Microsupercapacitors

    by Ningning Tan, Lan Zhao, Yaohang Weng, Haijun Li, Biao Huang, Xinda You, Beili Lu, Hanyang Liu, Jianhua Lv, Lirong Tang

    Wood pitch, derived from dry distillation of wood, is a promising carbon electrode material. A novel strategy is presented for fabricating honeycomb‐like porous carbon nanosheets using a template‐free approach. Wood pitch is pre‐treated with H₂O₂ to introduce oxygen‐containing functional groups selectively at the edges of polycyclic aromatic hydrocarbons, enhancing hydrophilicity and reactivity. Adding rosin groups to the oxidized wood pitch molecules helps to regulate intermolecular spacing and prevent excessive aggregation, facilitating subsequent KOH intercalation activation and the formation of a porous structure. The resulting rosin‐modified wood pitch‐based carbon material (RWPC‐0.2) features a high specific surface area (3521.5 m2 g−1). With a current density of 1 A g−1, the device has a specific capacitance of 376 F g−1. After 5000 cycles at 10 A g−1, it still has 83.8% of its initial specific capacitance. Using direct ink writing (DIW) technology in combination with poly(3,4‐ethylenedioxythiophene): polystyrene sulfonate/RWPC‐0.2 (PEDOT: PSS/RWPC‐0.2) as the electrode ink, microelectrodes are fabricated and microsupercapacitors are constructed with high areal capacitance (460 mF cm−2), excellent rate performance, and good cycling stability. This study offers new insights for developing printed micro‐energy storage devices based on wood pitch‐derived carbon materials and opens new possibilities for the application of biomass materials in smart electronics.


  • Synthesis of Guanine/Vermiculite Two-Dimensional Nanocomposites for Wireless Humidity Sensing in Nut Storage Environment

    by Qiqi Hong, Lan Zhao, Fengcai Lin, Ningning Tan, Xinda You, Beili Lu, Biao Huang, Jianhua Lv, Yandan Chen, Lirong Tang

    Two-dimensional (2D) nanostructures have the advantages of high specific surface area, easy surface functionalization, abundant active sites, and good compatibility with device integration and can be assembled into three-dimensional structures, which are key to the development of high-performance gas sensors. In this study, 2D vermiculite (VMT) nanosheets and guanine (G), two renewable resources with unique chemical structures, were organically combined to fully use the specificity of their molecular structures and functional activities. Driven by the regulation of 2D VMT nanosheets, guanine/vermiculite (G/VMT)-based 2D nanocomposites with controllable pore structure, multiple binding sites, and unobstructed mass transfer were designed and synthesized. The G/VMT nanocomposite material was used as a quartz crystal microbalance (QCM) electrode-sensitive film material to build a QCM-based humidity sensor. G/VMT-based QCM humidity sensor had good logarithmic linear relation (0.9971), high sensitivity (24.49 Hz/% relative humidity), low hysteresis (1.75% RH), fast response/recovery time (39/6 s), and good stability. Furthermore, with a QCM sensor and a specially designed wireless circuit, a wireless humidity detection system transmitting via Wi-Fi allows real-time monitoring of nut storage. This study presents an environmentally friendly, high-performance, miniature 2D nanocomposite sensor strategy for real-time monitoring.


  • Fabrication of quartz crystal microbalance humidity sensors based on super-hydrophilic cellulose nanocrystals

    by Weixiang Chen, Bo Chen, Rixin Lv, Milian Wu, Jie Zhou, Beili Lu, Biao Huang, Qilin Lu, Lirong Tang


  • Synthesis of light weight, high strength biomass-derived composite aerogels with low thermal conductivities

    by Lirong Tang, Senyang Zhuang, Biyun Hong, Zhenghan Cai, Yandan Chen, Biao Huang