Spencer G. Cira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Spencer G. Cira has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Hugh W. Hillhouse
Department of Chemical Engineering, Clean Energy Institute, Molecular Engineering and Sciences Institute, University of Washington, Seattle, Washington 98195-1750, USA
3 shared publications - Preetham P. Sunkari
Department of Chemical Engineering, Clean Energy Institute, Molecular Engineering and Sciences Institute, University of Washington, Seattle, Washington 98195-1750, USA
3 shared publications - Yuhuan Meng
Department of Chemical Engineering, Clean Energy Institute, Molecular Engineering and Sciences Institute, University of Washington, Seattle, Washington 98195-1750, USA
3 shared publications - Andrej Lenert
Department of Chemical Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States
1 shared publication - Annyn Howle
University of Michigan Ann Arbor MI USA
1 shared publication - Ethan Moran
University of Michigan Ann Arbor MI USA
1 shared publication
Latest Publications
- Open Access
- 20 October 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (44) , 38436-38445
Photooxidation reaction kinetics of mixed-cation mixed-halide perovskite
In situ absorbance measurements reveal two photooxidation pathways in FA 0.8 Cs 0.2 Pb(I 0.83 Br 0.17 ) 3 thin films. Kinetic modeling explains the dual role of water, with a posited hydrate formation pathway retarding degradation at high temperature.
- 20 October 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (44) , 38436-38445
Open AccessPhotooxidation reaction kinetics of mixed-cation mixed-halide perovskite
In situ absorbance measurements reveal two photooxidation pathways in FA 0.8 Cs 0.2 Pb(I 0.83 Br 0.17 ) 3 thin films. Kinetic modeling explains the dual role of water, with a posited hydrate formation pathway retarding degradation at high temperature.
- 15 January 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (7) , 5033-5044
Light-induced degradation of mixed-cation, mixed-halide perovskite: observed rates and influence of oxygen
The kinetics of light-induced Pb 0 formation in mixed-cation, mixed-halide perovskite films are studied using sub-bandgap absorption measurements. Oxygen is shown to prevent Pb 0 formation and modulate the optoelectronic performance decline.
- 15 January 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (7) , 5033-5044
Light-induced degradation of mixed-cation, mixed-halide perovskite: observed rates and influence of oxygen
The kinetics of light-induced Pb 0 formation in mixed-cation, mixed-halide perovskite films are studied using sub-bandgap absorption measurements. Oxygen is shown to prevent Pb 0 formation and modulate the optoelectronic performance decline.
- Open Access
- 14 December 2023
- Published by Wiley in Nanophotonics
- Vol. 13 (5) , 621-627
High albedo daytime radiative cooling for enhanced bifacial PV performance
We present a radiative cooling material capable of enhancing albedo while reducing ground surface temperatures beneath fielded bifacial solar panels. Electrospinning a layer of polyacrylonitrile nanofibers, or nanoPAN, onto a polymer‐coated silver mirror yields a total solar reflectance of 99 %, an albedo of 0.96, and a thermal emittance of 0.80. The combination of high albedo and high emittance is enabled by wavelength‐selective scattering induced by the hierarchical morphology of nanoPAN, which includes both thin fibers and bead‐like structures. During outdoor testing, the material outperforms the radiative cooling power of a state‐of‐the‐art control by ∼20 W/m 2 and boosts the photocurrent produced by a commercial silicon cell by up to 6.4 mA/cm 2 compared to sand. These experiments validate essential characteristics of a high‐albedo radiative‐cooling reflector with promising potential applications in thermal and light management of fielded bifacial panels.
- 14 December 2023
- Published by Wiley in Nanophotonics
- Vol. 13 (5) , 621-627
Open AccessHigh albedo daytime radiative cooling for enhanced bifacial PV performance
We present a radiative cooling material capable of enhancing albedo while reducing ground surface temperatures beneath fielded bifacial solar panels. Electrospinning a layer of polyacrylonitrile nanofibers, or nanoPAN, onto a polymer‐coated silver mirror yields a total solar reflectance of 99 %, an albedo of 0.96, and a thermal emittance of 0.80. The combination of high albedo and high emittance is enabled by wavelength‐selective scattering induced by the hierarchical morphology of nanoPAN, which includes both thin fibers and bead‐like structures. During outdoor testing, the material outperforms the radiative cooling power of a state‐of‐the‐art control by ∼20 W/m 2 and boosts the photocurrent produced by a commercial silicon cell by up to 6.4 mA/cm 2 compared to sand. These experiments validate essential characteristics of a high‐albedo radiative‐cooling reflector with promising potential applications in thermal and light management of fielded bifacial panels.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Decomposition Mechanisms and Kinetics of Perovskite Semiconductors
Understanding the chemical reactions that halide perovskite semiconductors undergo in the presence of moisture, oxygen, and light are essential to the commercial development of perovskite solar cells. The presentation will summarize our results and conclusions from the in-situ measurement optical transmittance, light scattering, quantitative spatially resolved photoluminescence, and photoconductivity (from which an ambipolar diffusion length is calculated) during the decomposition of MAPbI3 and two representative low and high bandgap perovskite compositions: (FA0.75,Cs0.25)(Pb0.50,Sn0.50)I3 and (FA0.80,Cs0.20)Pb(I0.83,Br0.17)3 in the presence of moisture, oxygen, and light (individually and combinations thereof). We report the quantitative chemical decomposition rate constants for based on optical absorbance above and below the perovskite bandgap as a function of the environmental species present. These data are used to derive a rate law for each material. These first-of-their-kind measurements reveal the dominant degradation pathways in each of these three archetypal perovskites. Briefly, for MAPbI3 we discovered a new chemical reaction pathway referred to as a water-accelerated photo-oxidation (WPO) pathway, which is the dominant chemical degradation pathway when light, oxygen, and humidity are present (and much faster than other dry photooxidation pathways) [1]. For the low bandgap (FA0.75,Cs0.25)(Pb0.50,Sn0.50)I3 kinetic measurements that a simple oxidation pathway is the most dominant [2]. More recent results from monitoring the decomposition dynamics of (FA0.80,Cs0.20)Pb(I0.83,Br0.17)3 reveal there are two dominant pathways, depending on the presence of oxygen and moisture, which lead to distinct degradation products. These latest results are from a forthcoming manuscript on this composition. [1] Siegler, Dunlap-Shohl, Meng, Yang, Kau, Sunkari, Tsai, Armstrong, Chen, Beck, Meila & Hillhouse, "Water-Accelerated Photooxidation of CH3NH3PbI3 Perovskite," J. Am. Chem. Soc. 2022, 144, 12, 5552-5561. [2] Meng, Sunkari, Meila & Hillhouse, "Chemical Reaction Kinetics of the Decomposition of Low Bandgap Tin-Lead Halide Perovskite Films and the Effect on the Ambipolar Diffusion Length," ACS Energy Lett. 2023, Accepted.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Decomposition Mechanisms and Kinetics of Perovskite Semiconductors
Understanding the chemical reactions that halide perovskite semiconductors undergo in the presence of moisture, oxygen, and light are essential to the commercial development of perovskite solar cells. The presentation will summarize our results and conclusions from the in-situ measurement optical transmittance, light scattering, quantitative spatially resolved photoluminescence, and photoconductivity (from which an ambipolar diffusion length is calculated) during the decomposition of MAPbI3 and two representative low and high bandgap perovskite compositions: (FA0.75,Cs0.25)(Pb0.50,Sn0.50)I3 and (FA0.80,Cs0.20)Pb(I0.83,Br0.17)3 in the presence of moisture, oxygen, and light (individually and combinations thereof). We report the quantitative chemical decomposition rate constants for based on optical absorbance above and below the perovskite bandgap as a function of the environmental species present. These data are used to derive a rate law for each material. These first-of-their-kind measurements reveal the dominant degradation pathways in each of these three archetypal perovskites. Briefly, for MAPbI3 we discovered a new chemical reaction pathway referred to as a water-accelerated photo-oxidation (WPO) pathway, which is the dominant chemical degradation pathway when light, oxygen, and humidity are present (and much faster than other dry photooxidation pathways) [1]. For the low bandgap (FA0.75,Cs0.25)(Pb0.50,Sn0.50)I3 kinetic measurements that a simple oxidation pathway is the most dominant [2]. More recent results from monitoring the decomposition dynamics of (FA0.80,Cs0.20)Pb(I0.83,Br0.17)3 reveal there are two dominant pathways, depending on the presence of oxygen and moisture, which lead to distinct degradation products. These latest results are from a forthcoming manuscript on this composition. [1] Siegler, Dunlap-Shohl, Meng, Yang, Kau, Sunkari, Tsai, Armstrong, Chen, Beck, Meila & Hillhouse, "Water-Accelerated Photooxidation of CH3NH3PbI3 Perovskite," J. Am. Chem. Soc. 2022, 144, 12, 5552-5561. [2] Meng, Sunkari, Meila & Hillhouse, "Chemical Reaction Kinetics of the Decomposition of Low Bandgap Tin-Lead Halide Perovskite Films and the Effect on the Ambipolar Diffusion Length," ACS Energy Lett. 2023, Accepted.