Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yihan Wang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance-Based Fire Safety Assessment Mechanism for High-Rise Timber Ancient Pagoda Buildings Based on Fire Dynamics Simulator

    by Yangyang Wei, Yuer Wang, Yihan Wang, Yifei Sun, Peng Wan, Feijie Xia, Mingfei Li

    Fire protection remains one of the key challenges in the field of architectural heritage conservation, particularly for heritage buildings dominated by timber structures, which face greater difficulties in fire prevention and risk assessment. To systematically evaluate the fire safety performance of high-rise timber heritage buildings, this study takes the Shengjin Pagoda, a typical brick–timber pavilion-style ancient tower in Jiangxi Province, China, as the research object. A three-dimensional performance-based fire assessment framework was developed using Fire Dynamics Simulator (FDS) and PyroSim. Based on field survey data and historical documentation, the geometric characteristics, material properties, and vertical circulation system of the pagoda were reconstructed. Three representative fire scenarios, including bottom-floor ignition, simultaneous multi-level ignition, and wind-driven top-floor ignition, were established to investigate smoke propagation, thermal insulation degradation, and the thermal response of critical timber components under different fire conditions. The results show that brick walls provide effective thermal insulation during the early stages of fire, with efficiency exceeding 90%, but this decreases to approximately 55% in upper regions due to chimney-effect-driven smoke accumulation. Under wind-driven top-floor ignition, exposed dougong components can reach temperatures of 782 °C, resulting in a progressive “top-down and outside-in” failure mechanism. The study reveals the dominant smoke-driven heat transfer pathways and the failure sequence of critical load-bearing elements. Based on these findings, a performance-based fire protection strategy incorporating vertical virtual smoke control zoning and fire-resistance enhancement of key structural components is proposed to support the sustainable conservation of historic high-rise timber structures.

  • Open Access

    Design of Knitted Fabrics with Biomimetic Bird Feather Hierarchical Structures for Thermal and Moisture Adaptation in Outdoor Environments for the Elderly

    by Yuan Shu, Panpan Li, Yihan Wang, Yangyang Wei

    Bird feathers possess functions such as water resistance, thermal insulation, and air permeability, providing inspiration for the design of functional fabrics. Based on the functional differentiation of different feather regions and the structural constraints associated with these functions, this study selected down feathers, feather vanes, hooklets, and fluffy feather filament node structures as biomimetic prototypes. Four biomimetic knitted structures were designed for outdoor environments with significant temperature fluctuations and for the thermo-moisture comfort needs of older adults. Through macro- and micro-structural feature extraction, three-dimensional modeling, and experimental testing, a multi-parameter evaluation system covering water resistance, thermal resistance, thermal insulation rate, air permeability, moisture vapor transmission, and moisture management was established to systematically evaluate the thermo-moisture regulation performance of the fabrics. The results showed that each structure exhibited distinct performance advantages: Structure 1 demonstrated the best thermal insulation performance; Structure 2 showed relatively superior water resistance and outstanding air permeability; Structure 4 exhibited relatively superior moisture vapor transmission and moisture management performance; and Structure 3 achieved the highest gray relational optimality value, indicating a relatively balanced thermo-moisture regulation capability. Among all performance indicators, air permeability showed the highest correlation with the knitted structures. Based on these results, and considering regional differences in heat generation and sweating across different body parts of older adults, this study further explored zonal application strategies for elderly outdoor clothing to improve wearing comfort and functionality under environments with fluctuating thermal conditions.

  • Open Access

    Biomimetic Planning and Design of Five-Minute Living Circle Residential Areas Inspired by Cellular Structure

    by Pan Pei, Yihan Wang, Feijie Xia, Yueqing Wang, Yangyang Wei

    Biological cellular structures exhibit a high degree of systematic organization in both morphological configuration and functional coordination, providing important biomimetic insights for urban spatial organization. To address issues in traditional high-density residential areas, such as homogeneous spatial structures and insufficient accessibility of public spaces, this study proposes a planning method for five-minute living circle residential areas based on a biomimetic cellular structure within the framework of space syntax theory. Taking a residential area in Wuhan, China, as a case study, a cell-like spatial structure model was constructed. Convex space analysis, axial analysis, and visibility analysis were conducted using Depthmap software to quantitatively evaluate key syntactic indicators, including integration, connectivity, mean depth, and choice. The results show that, compared with the original planning scheme, the biomimetic cellular planning model significantly optimized the spatial structure of the residential area by relying on the functionally synergistic mechanisms of selective permeability of the cell membrane, whole-area permeation of the cytoplasm, central regulation of the nucleus, distributed coordination of organelles, and efficient transport through cellular microfilaments. In the sample living circle, the overall integration increased from 1.27 to 1.64, the mean depth decreased from 3.79 to 3.18, and spatial connectivity increased from 3.74 to 5.44. Meanwhile, the synergy of the road network increased from 0.44 to 0.86, indicating marked improvements in spatial accessibility, connectivity, and the degree of coordination within the spatial structure. In addition, the visibility analysis showed that the pedestrian aggregation capacity of the public core space was enhanced, and the spatial vitality of public activity spaces in the residential area was improved. The findings demonstrate that the spatial organization model based on biomimetic cellular principles can effectively enhance spatial efficiency and social vitality in five-minute living circle residential areas, providing a quantifiable design method and theoretical framework for bio-inspired urban planning.


  • Open Access

    High-Precision Digital Reconstruction and Conservation of Architectural Heritage Based on Virtual Reality

    by Yangyang Wei, Yujia Chen, Yihan Wang, Lei Cao

    The conservation and restoration of architectural heritage face dual challenges from natural erosion and human interference, necessitating the adoption of efficient and non-contact digital technologies to achieve sustainable preservation. Virtual reality (VR) technology, with its advantages of immersion, interactivity, and visualization, provides a novel technological pathway for digital documentation, conservation decision-making, and public presentation of architectural heritage. Taking the Fuliang Red Pagoda in Jingdezhen, Jiangxi Province, as the research object, this study constructs a high-precision digital reconstruction and VR interactive application workflow based on the integration of terrestrial laser scanning and close-range photogrammetry. Through point cloud denoising, Iterative Closest Point (ICP) registration, and Poisson surface reconstruction algorithms, a refined three-dimensional model of the pagoda is achieved, and an immersive VR system is developed with functions including component information query, virtual restoration scheme switching, and interactive exploration. The results demonstrate that this technical workflow not only enables non-contact digital archiving of the Fuliang Red Pagoda but also provides a visual decision-support tool for conservation interventions. Under full-scene operation, the system achieves an average rendering frame rate of 92 FPS and maintains motion-to-photon latency below 20 ms, ensuring good real-time performance and interaction stability. The findings indicate that VR-based digital technologies can enhance the scientific rigor of conservation planning and promote public engagement while adhering to the principles of authenticity and minimum intervention. This study provides a replicable technical pathway and practical reference for high-precision digital reconstruction and sustainable conservation of historic buildings.


  • Open Access

    Food Emotional Perception and Eating Willingness Under Different Lighting Colors: A Preliminary Study Based on Consumer Facial Expression Analysis

    by Yuan Shu, Huixian Gao, Yihan Wang, Yangyang Wei

    The influence of lighting color on food is a multidimensional process, linking visual interventions with people’s perception of food appearance, physiological responses, and psychological associations. This study, as a preliminary exploratory research, aims to initially investigate the effects of different lighting colors on food-induced consumer appetite and emotional perception. By measuring consumers’ physiological facial expression data, we verify whether the results are consistent with self-reported subjective evaluations. Questionnaires, Shapiro–Wilk tests, and one-sample t-tests were employed for data mining and cross-validation and combined with generalized facial expression recognition (GFER) technology to analyze participants’ emotional perceptions under various lighting colors. The results show that consumers displayed the most positive emotions and the highest appetite under 2700 K warm white light. Under this condition, the average intensity of participants’ “happy” emotion was 0.25 (SD = 0.12), indicating a clear positive emotional state. Eating willingness also reached its peak at 2700 K. In contrast, blue light-induced negative emotions and lower appetite. Among all lighting types, blue light evoked the strongest “sad” emotion (M = 0.39). This study provides a preliminary exploration of the theoretical framework regarding the relationship between food and consumer behavior, offering new perspectives for product marketing in the food industry and consumer food preference cognition. However, the generalizability of its conclusions still requires further verification in subsequent studies.


  • Open Access

    Fruit Freshness Classification and Detection Based on the ResNet-101 Network and Non-Local Attention Mechanism

    by Yuan Shu, Jipeng Zhang, Yihan Wang, Yangyang Wei

    Fruit freshness monitoring represents one of the key research foci in the quality control of fruits and vegetables. Traditional manual inspection methods are characterized by subjectivity and inefficiency, which renders them unsuitable for large-scale and real-time detection demands. Automated detection methods based on deep learning have increasingly attracted attention. In this study, a fruit freshness classification method based on the ResNet-101 network and a Non-local Attention mechanism is proposed. By embedding a Non-local Attention module into ResNet-101, subtle surface feature variations of the fruit are captured, thereby enhancing the model’s capacity to identify rotten areas and detect variations in color under complex backgrounds. Experimental results show that the improved model achieves a precision of 94.7%, a recall of 94.24%, and an F1-score of 94.24%, outperforming conventional ResNet-101, ResNet-50, and VGG-16 models. In particular, under complex environmental conditions, the model demonstrates significantly improved robustness in image processing. The combination of the Non-local Attention mechanism with the ResNet-101 model can substantially enhance the accuracy and stability of fruit freshness detection, which is applicable to real-time monitoring tasks in intelligent agriculture and smart logistics.


  • Open Access

    The Influence of Consumption Purpose on Consumer Preferences for Fruit Attributes: The Moderating Effect of Color Perception

    by Yihan Wang, Lingying Liu, Yangyang Wei

    With the increasing awareness of health among residents, consumers are paying more attention to their eating purposes and food safety when choosing fruits. This study aims to explore the impact of eating purpose on consumers’ preferences for fruits and fruit products under the mediation of color perception. The study obtained experimental data from 489 urban consumers in China through the Credamo data collection platform. Furthermore, four experimental groups were set up to propose six hypotheses based on the influence of eating purpose on consumer preferences for fruits and their products. The study utilized Likert scale questionnaires, chi-square tests, and variance analysis for data mining and cross-validation. The results indicate that the visual characteristics of fruits (especially color) affect the purchase preferences of consumers with different eating purposes. Approximately 65% of health-oriented consumers are highly sensitive to the color and nutritional value of fruits. They believe that fresh fruits are rich in natural nutrients and play an important role in maintaining health and preventing diseases. Meanwhile, around 62% of consumers with specific nutritional needs prefer processed fruit products, such as fruit preserves or dried fruits. These consumers have a weaker perception of color and focus primarily on the functionality of the fruits. Additionally, the study found that safety/taste preferences acted as a mediator and associative learning as a moderating variable. Around 58% of consumers indicated that their purchase preferences are influenced by safety and taste, and the relative importance of safety and taste preferences significantly mediated the relationship between eating purpose and purchase preferences. Under the moderating effect of associative learning, health-oriented consumers, when associative learning is activated, are about 45% more likely to choose fresh fruits. The study highlights consumers’ health-conscious perceptions in fruit selection, focusing on how color perception moderates the preference choices of different consumer groups based on their eating purposes. It emphasizes the need for businesses to adjust product positioning and marketing strategies according to consumer perceptions to promote broader healthy eating behaviors.


  • Open Access

    Research on Indoor Health Lighting Design Based on Silicon Substrate Golden Light LED Technology

    by Zhuoyi Jiang, Yeqing Zhu, Yihan Wang, Yangyang Wei

    Silicon substrate golden light LED, as an emerging blue-light-free health lighting technology, has become one of the key technologies for home health lighting environments. This study uses silicon substrate golden light LED as the lighting source for home lighting, and based on the lighting demands of two indoor types, employs DIALux Evo lighting simulation software to simulate the indoor lighting environment. First, the simulated lighting data for various indoor areas are compared with the national lighting standards (GB/T50034-2024) to verify whether the lighting type meets the home lighting requirements. Next, a comparison is made between the lighting efficiency of silicon substrate golden light LED and a reference sample LED to validate whether the silicon substrate golden light LED possesses high lighting efficiency and low power consumption. Finally, long-term exposure to both the silicon substrate golden light LED and reference sample LED is used to record the secretion levels of melatonin in the human body. The experimental results show that the silicon substrate golden light LED not only provides sufficient home lighting but also demonstrates high efficiency and low power consumption. Additionally, under the illumination of silicon substrate golden light LED, the melatonin secretion concentration significantly increases to (960 ± 15) pg/mL after 2.5 h of exposure, which is 8.2 times higher than that of the conventional LED group (t = 12.34, df = 14, p < 0.001). The silicon substrate golden light LED technology provides a feasible solution for home health lighting design by creating a zero-blue-light health lighting environment.


  • Open Access

    Children’s Hospital Environment Design Based on AHP/QFD and Other Theoretical Models

    by Haohua Zheng, Lingying Liu, Qi Zhang, Yihan Wang, Yangyang Wei

    Spatial environmental factors can effectively alleviate children’s fear of the medical environment when they seek medical treatment. This study focuses on the special environmental space of a children’s hospital, thoroughly considering the emotional needs of and the therapeutic effects on children as a unique group during medical treatment. By analyzing the existing design of children’s hospital environments, this research actively explores more suitable environmental design solutions for children’s healthcare settings. This study summarizes the user demand factors of children’s hospital environmental space design through field research and analysis interviews and calculates the weight indicators of user demand through AHP hierarchical analysis. On this basis, based on the QFD theoretical model, user needs are transformed into technical needs, and a house of quality is drawn to judge the conflicting needs through the positive and negative correlations between the factors. Finally, the forty invention principles of the TRIZ innovation theory are used to propose a solution to the environmental space program of children’s hospitals to obtain the optimal solution to the environmental space design effect. This study shows that incorporating theoretical models of AHP, QFD, and TRIZ into the environmental space design of children’s hospitals can improve and optimize the environmental space of children’s hospitals, and the example of a children’s hospital can be designed to meet children’s emotional needs according to this model. A series of interesting innovative practices, such as personalized digital information diagnosis and treatment, interesting visual guidance, and the implicit healing effect of color, can be realized. The aim is to create a modern, child-friendly medical environment that not only meets medical functional requirements but also effectively alleviates the stress of pediatric patients during diagnosis and treatment. This study preliminarily verifies the scientificity and rationality of the entire design process and provides a reference for the design practices of children’s hospital environments.


  • Open Access

    Research on the Digital Preservation of Architectural Heritage Based on Virtual Reality Technology

    by Haohua Zheng, Leyang Chen, Hui Hu, Yihan Wang, Yangyang Wei

    As a representative of the scientific and technological achievements of the new era, the overall development of virtual reality (VR) technology is becoming increasingly refined, which provides new development ideas and technical support in the field of ancient building restoration and architectural heritage preservation. In this context, digital conservation and the practice of architectural heritage have become important focuses of application in the industry. This paper starts from the core concept of VR technology, analyzes the value of the application of VR technology in the protection of ancient architecture, puts forward relevant suggestions and technical application methods, and takes Red Pagoda in Fuliang County as an example. In this sense, virtual reality technology is used to restore and protect the buildings, forming a digital heritage of ancient architecture. This study first utilizes a three-dimensional laser scanning instrument to collect point cloud data, and then the plane graph is drawn by measurement. Then, an Architectural Heritage Building Information Model is created, and comprehensive information on historical buildings is integrated. Finally, VR technology is used to show the effect of digital display and preservation. This study transforms architectural cultural heritage into a shareable and renewable digital form through restoration and reproduction, interpreting and utilizing it from a new perspective and providing new ideas and methods for architectural heritage conservation.