Latha Ganesan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Latha Ganesan has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Thirunavukkarasu Ayyadurai
Department of Forest Ecology and Management, Swedish University of Agricultural Sciences, Umeå, Sweden
3 shared publications - Malarkodi Amirthalingam
National Institute of Ocean Technology, Ministry of Earth Sciences, Chennai - 600 100, India
2 shared publications - Shanmugasundaram Karibeeran
Engineering Design Division, Department of Mechanical Engineering, College of Engineering Guindy, Anna University, Chennai, India
2 shared publications - Shweta Lokhande
National Institute of Ocean Technology, Ministry of Earth Sciences, Chennai - 600 100, India
2 shared publications - Subramanian Srinivasan
Department of Instrumentation Engineering, Madras Institute of Technology, Anna University, Chennai, Tamil Nadu, India, 600044
2 shared publications - Amirthalingam Malarkodi
National Institute of Ocean Technology
1 shared publication
Latest Publications
- 16 September 2026
- Published by Springer Nature in Ocean Dynamics
- Vol. 76 (10) , 99
Wind sea and swell characteristics in the wave climate off Chennai
- 16 September 2026
- Published by Springer Nature in Ocean Dynamics
- Vol. 76 (10) , 99
Wind sea and swell characteristics in the wave climate off Chennai
- 24 January 2025
- Published by Marine Technology Society in Marine Technology Society Journal
- Vol. 59 (1) , 120-131
Deep Water Wave Spectral Characteristics in the Northcentral Bay of Bengal Using Moored Buoy Measurements
This research provides the deep-water wave spectral characteristics in the Northcentral Bay of Bengal using wave observations obtained from the National Institute of Ocean Technology’s Ocean Moored Buoy Network for the northern Indian Ocean Buoy for the years 2012‐2018. Several studies on wave spectral characteristics in coastal waters and open ocean in the Bay of Bengal have been conducted previously using model simulations/remote sensing; however, this research is mainly focused on investigating wave spectra in the deep-water region of the Bay of Bengal using in-situ observations. To examine the inter-annual and seasonal variations in spectral energy density, monthly, seasonally, and yearly averaged wave spectra were computed. Large variations in monthly averaged wave spectra were observed during the months of January, May, October, November, and December due to extreme events in the Bay of Bengal. The spectral peaks are double with high energy density (8.8 m2/Hz) in July 2013 during the southwest monsoon period, and the existence of a single peak during cyclonic events and the rest of the month’s multiple peaks are dominant, indicating the presence of a multiple wave system in this region. Similarly, the yearly averaged wave spectrum shows a high energy density (2.0 m2/Hz) in 2013 compared with other years due to cyclone Phailin. In addition, the wave parameters, like significant wave height, peak wave period, and mean wave direction, and meteorological parameters, like sea-level pressure and wind fields, during cyclones in the Bay of Bengal over 7 years were examined. The highlight of this study is that the wave spectra are observed to be single, double, and multi-peaked and they have seasonal and annual variations in that location. This is the first study that utilized in-situ measurements to investigate the spectral characteristics and wave patterns over 7 years.
- 24 January 2025
- Published by Marine Technology Society in Marine Technology Society Journal
- Vol. 59 (1) , 120-131
Deep Water Wave Spectral Characteristics in the Northcentral Bay of Bengal Using Moored Buoy Measurements
This research provides the deep-water wave spectral characteristics in the Northcentral Bay of Bengal using wave observations obtained from the National Institute of Ocean Technology’s Ocean Moored Buoy Network for the northern Indian Ocean Buoy for the years 2012‐2018. Several studies on wave spectral characteristics in coastal waters and open ocean in the Bay of Bengal have been conducted previously using model simulations/remote sensing; however, this research is mainly focused on investigating wave spectra in the deep-water region of the Bay of Bengal using in-situ observations. To examine the inter-annual and seasonal variations in spectral energy density, monthly, seasonally, and yearly averaged wave spectra were computed. Large variations in monthly averaged wave spectra were observed during the months of January, May, October, November, and December due to extreme events in the Bay of Bengal. The spectral peaks are double with high energy density (8.8 m2/Hz) in July 2013 during the southwest monsoon period, and the existence of a single peak during cyclonic events and the rest of the month’s multiple peaks are dominant, indicating the presence of a multiple wave system in this region. Similarly, the yearly averaged wave spectrum shows a high energy density (2.0 m2/Hz) in 2013 compared with other years due to cyclone Phailin. In addition, the wave parameters, like significant wave height, peak wave period, and mean wave direction, and meteorological parameters, like sea-level pressure and wind fields, during cyclones in the Bay of Bengal over 7 years were examined. The highlight of this study is that the wave spectra are observed to be single, double, and multi-peaked and they have seasonal and annual variations in that location. This is the first study that utilized in-situ measurements to investigate the spectral characteristics and wave patterns over 7 years.
- Open Access
- 6 May 2024
- Published by Defence Scientific Information and Documentation Centre in Defence Science Journal
- Vol. 74 (4) , 567-582
Direction of Arrival Estimation Using Underwater Acoustic Vector Sensor Array Towards Coastal Surveillance Applications
The objective of this paper is to present the performance of Direction of Arrival(DoA) estimation algorithms for underwater sound source localization using an acoustic Vector Sensor Array (VSA) that is developed by the National Institute of Ocean Technology, Chennai. Algorithms such as conventional beam forming, Multiple Signal Classification (MUSIC) with Eigen value decomposition, and MUSIC with Singular Value Decomposition (SVD) are used for estimation of DoA and performance study. An experiment has been conducted with the VSA at the Acoustic Test Facility of NIOT with the source transmission of 1 kHz to 5 kHz for different azimuth angles. The estimation of DoA using the above three algorithms and the comparison of the results on resolution and accuracy have been studied in detail in terms of the number of vector elements. Results reveal that the MUSIC method gives results with higher accuracy and resolution than the conventional method. The maximum deviation from the true angle in the conventional method is 4°; in MUSIC, it is 2°, whereas in MUSIC with SVD, it is 1°. While the standard MUSIC algorithm involves computing the eigenvectors of the covariance matrix, which can be computationally expensive, MUSIC with SVD provides a more efficient way to achieve better results. SVD enables straightforward computation of the signal subspace, making it more practical for real-time applications like coastal surveillance. Further to the laboratory experiment, the vector sensor system has been deployed in an open sea environment near the harbor and a known source experiment is carried out. The DoA estimated using MUSIC with SVD for the field data reveals that the results are in good comparison with the measured azimuth and elevation positions. The deviations in the field results are due to dynamic conditions of the ocean ,and more sea trials need to be carried out for further study.
- 6 May 2024
- Published by Defence Scientific Information and Documentation Centre in Defence Science Journal
- Vol. 74 (4) , 567-582
Open AccessDirection of Arrival Estimation Using Underwater Acoustic Vector Sensor Array Towards Coastal Surveillance Applications
The objective of this paper is to present the performance of Direction of Arrival(DoA) estimation algorithms for underwater sound source localization using an acoustic Vector Sensor Array (VSA) that is developed by the National Institute of Ocean Technology, Chennai. Algorithms such as conventional beam forming, Multiple Signal Classification (MUSIC) with Eigen value decomposition, and MUSIC with Singular Value Decomposition (SVD) are used for estimation of DoA and performance study. An experiment has been conducted with the VSA at the Acoustic Test Facility of NIOT with the source transmission of 1 kHz to 5 kHz for different azimuth angles. The estimation of DoA using the above three algorithms and the comparison of the results on resolution and accuracy have been studied in detail in terms of the number of vector elements. Results reveal that the MUSIC method gives results with higher accuracy and resolution than the conventional method. The maximum deviation from the true angle in the conventional method is 4°; in MUSIC, it is 2°, whereas in MUSIC with SVD, it is 1°. While the standard MUSIC algorithm involves computing the eigenvectors of the covariance matrix, which can be computationally expensive, MUSIC with SVD provides a more efficient way to achieve better results. SVD enables straightforward computation of the signal subspace, making it more practical for real-time applications like coastal surveillance. Further to the laboratory experiment, the vector sensor system has been deployed in an open sea environment near the harbor and a known source experiment is carried out. The DoA estimated using MUSIC with SVD for the field data reveals that the results are in good comparison with the measured azimuth and elevation positions. The deviations in the field results are due to dynamic conditions of the ocean ,and more sea trials need to be carried out for further study.
- 20 February 2024
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 30 (1) , 53-58
Characterization of Fiber Metal Laminates for the Development of Subsea Housing
Fiber Metal Laminates (FML) are hybrid composites comprising metals and Fiber Reinforced Plastics (FRP). FMLs are the most widely used in aerospace, defence and automotive sectors due to their superior qualities like light weight, tensile, compression, flexural, excellent fatigue and impact resistance. The properties like strength-to-weight ratio, susceptibility to corrosion and good heat conduction of FML make it suitable for subsea applications. Commonly, FML with a combination of aluminium (Al), titanium (Ti), stainless steel (SS) alloys and FRP are widely used for ocean applications. Compared to other FML, the SS alloy-based FML is typically used in subsea applications as it has more creep and excellent corrosion resistance. In India, under the Ocean Acoustics programme of the National Institute of Ocean Technology (NIOT), an autonomous underwater Ambient Noise Measurement System (ANMS) has been developed and deployed in the shallow waters of Indian seas for the past 12 years to study the background noise prevailing in the sea. To accommodate electronics and power packs for the measurement of ambient noise at an ocean depth of 100 m, subsea housing with stainless steel 316L (SS316L) material for a pressure rating of 1 MPa has been developed. The objective of this study is to develop the FML with SS316L and FRP for reducing the weight of the housing. Based on the literature studies and Classical Laminate Theory (CLT), the FML has been fabricated as a 0.45 m (450 mm) panel with a sequence of SS316L as outer layers and E-glass fibre and carbon as the inner layers. The total thickness of the laminates is 0.006 m (6 mm). The developed FMLs are processed with water jet cutting machines to carry out various testing such as tensile, compression and flexural, which are relevant to the characterization of FML and the experimental results are described in the paper.
- 20 February 2024
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 30 (1) , 53-58
Characterization of Fiber Metal Laminates for the Development of Subsea Housing
Fiber Metal Laminates (FML) are hybrid composites comprising metals and Fiber Reinforced Plastics (FRP). FMLs are the most widely used in aerospace, defence and automotive sectors due to their superior qualities like light weight, tensile, compression, flexural, excellent fatigue and impact resistance. The properties like strength-to-weight ratio, susceptibility to corrosion and good heat conduction of FML make it suitable for subsea applications. Commonly, FML with a combination of aluminium (Al), titanium (Ti), stainless steel (SS) alloys and FRP are widely used for ocean applications. Compared to other FML, the SS alloy-based FML is typically used in subsea applications as it has more creep and excellent corrosion resistance. In India, under the Ocean Acoustics programme of the National Institute of Ocean Technology (NIOT), an autonomous underwater Ambient Noise Measurement System (ANMS) has been developed and deployed in the shallow waters of Indian seas for the past 12 years to study the background noise prevailing in the sea. To accommodate electronics and power packs for the measurement of ambient noise at an ocean depth of 100 m, subsea housing with stainless steel 316L (SS316L) material for a pressure rating of 1 MPa has been developed. The objective of this study is to develop the FML with SS316L and FRP for reducing the weight of the housing. Based on the literature studies and Classical Laminate Theory (CLT), the FML has been fabricated as a 0.45 m (450 mm) panel with a sequence of SS316L as outer layers and E-glass fibre and carbon as the inner layers. The total thickness of the laminates is 0.006 m (6 mm). The developed FMLs are processed with water jet cutting machines to carry out various testing such as tensile, compression and flexural, which are relevant to the characterization of FML and the experimental results are described in the paper.
- 15 December 2023
- Published by Marine Technology Society in Marine Technology Society Journal
- Vol. 57 (4) , 15-23
Shallow Water Acoustic Vector Sensor Array AutoNomous System (SVAAN) for Coastal Surveillance Applications
Shallow Water Acoustic Vector Sensor Array AutoNomous System (SVAAN) is a passive acoustic monitoring system using vector sensors. Acoustic vector sensors measure acoustic pressure and particle velocity, and an array of such sensors are very useful in underwater source localization. SVAAN is thus developed for surveillance applications in coastal waters and designed for a 100-m depth rating. The main objective of this work is to present SVAAN that is developed as a sea bed mounted system, consisting of two vector sensors and four hydrophones. In addition, an inertial sensor has been included to measure the system orientation when deployed. This was deployed as a bottom mounted unit in the shallow waters of South-West Bay of Bengal to measure the noise from boats/ships and localize the source. The acoustic data are analyzed, Direction of Arrival is estimated using Multiple Signal Classification for source localization, and the performance of SVAAN is studied. In addition to that, the tracking of boat noise has been estimated from the experiment data. Results and further enhancement of the system are discussed.
- 15 December 2023
- Published by Marine Technology Society in Marine Technology Society Journal
- Vol. 57 (4) , 15-23
Shallow Water Acoustic Vector Sensor Array AutoNomous System (SVAAN) for Coastal Surveillance Applications
Shallow Water Acoustic Vector Sensor Array AutoNomous System (SVAAN) is a passive acoustic monitoring system using vector sensors. Acoustic vector sensors measure acoustic pressure and particle velocity, and an array of such sensors are very useful in underwater source localization. SVAAN is thus developed for surveillance applications in coastal waters and designed for a 100-m depth rating. The main objective of this work is to present SVAAN that is developed as a sea bed mounted system, consisting of two vector sensors and four hydrophones. In addition, an inertial sensor has been included to measure the system orientation when deployed. This was deployed as a bottom mounted unit in the shallow waters of South-West Bay of Bengal to measure the noise from boats/ships and localize the source. The acoustic data are analyzed, Direction of Arrival is estimated using Multiple Signal Classification for source localization, and the performance of SVAAN is studied. In addition to that, the tracking of boat noise has been estimated from the experiment data. Results and further enhancement of the system are discussed.
- Open Access
- 17 October 2023
- Published by Defence Scientific Information and Documentation Centre in Defence Science Journal
- Vol. 74 (01) , 108-118
Hybrid Composites for the Design and Development of Pressure Vessel for Underwater Applications
The study’s main objective is to design and develop pressure vessels in underwater applications using Hybrid composites-Fibre Metal Laminates (FML) so that the weight will be reduced. The proposed pressure vesselaccommodates electronics in the underwater ambient noise measurement system under an external hydrostatic pressure of 1 MPa (10 bar). The research study aims initially to design and develop a pressure vessel with stainless steel 316 L and subsequently design a pressure vessel with hybrid composites with a combination of composite materials of E-glass and carbon/epoxy materials with a metal alloy stainless steel 316 L. The pressure vessel has been optimised with varying metal and composite percentage combinations. The cylinder’s wall thickness has been pivotal in optimizing pressure vessel design. Classical Laminate Theory (CLT) transforms the FML pressure vessel or cylinder into a rectangular plate. As preliminary measures, FML specimen with a size of 0.45 m square laminate and 0°orientation has been developed with 50 % metal layer and 50 % fibre composites, and corresponding mechanical tests have been carried out as per the standards. The tensile strength of the developed FML is 420 MPa compared to base metal (SS316 L) strength of 556 MPa, and similarly, Flexural and Impact properties have shown a higher level when compared to other types of FMLs.
- 17 October 2023
- Published by Defence Scientific Information and Documentation Centre in Defence Science Journal
- Vol. 74 (01) , 108-118
Open AccessHybrid Composites for the Design and Development of Pressure Vessel for Underwater Applications
The study’s main objective is to design and develop pressure vessels in underwater applications using Hybrid composites-Fibre Metal Laminates (FML) so that the weight will be reduced. The proposed pressure vesselaccommodates electronics in the underwater ambient noise measurement system under an external hydrostatic pressure of 1 MPa (10 bar). The research study aims initially to design and develop a pressure vessel with stainless steel 316 L and subsequently design a pressure vessel with hybrid composites with a combination of composite materials of E-glass and carbon/epoxy materials with a metal alloy stainless steel 316 L. The pressure vessel has been optimised with varying metal and composite percentage combinations. The cylinder’s wall thickness has been pivotal in optimizing pressure vessel design. Classical Laminate Theory (CLT) transforms the FML pressure vessel or cylinder into a rectangular plate. As preliminary measures, FML specimen with a size of 0.45 m square laminate and 0°orientation has been developed with 50 % metal layer and 50 % fibre composites, and corresponding mechanical tests have been carried out as per the standards. The tensile strength of the developed FML is 420 MPa compared to base metal (SS316 L) strength of 556 MPa, and similarly, Flexural and Impact properties have shown a higher level when compared to other types of FMLs.
- 25 April 2022
- Published by Elsevier in Applied Acoustics
- Vol. 194, 108778
Influence of internal wave induced sound speed variability on acoustic propagation in shallow waters of North West Bay of Bengal
- 25 April 2022
- Published by Elsevier in Applied Acoustics
- Vol. 194, 108778
Influence of internal wave induced sound speed variability on acoustic propagation in shallow waters of North West Bay of Bengal
- 27 November 2020
- Published by Elsevier in Applied Acoustics
- Vol. 174, 107783
Passive time reversal acoustics for horizontal shallow water acoustic communication to mitigate the effect of intersymbol interference
- 27 November 2020
- Published by Elsevier in Applied Acoustics
- Vol. 174, 107783
Passive time reversal acoustics for horizontal shallow water acoustic communication to mitigate the effect of intersymbol interference
- 1 June 2006
- Published by Wiley in Earthquake Spectra
- Vol. 22 (3S) , 173-186
Tsunami Runup Survey along the Southeast Indian Coast
The 26 December Indian Ocean tsunami was an extraordinary event in the history of natural hazards. It severely affected many countries surrounding the Indian Ocean: Indonesia, Thailand, Malaysia, Myanmar, Bangladesh, India, Sri Lanka, the Maldives, and African countries. Unlike the previous tsunami events in the last 40 years, the seriously affected areas are so vast that a traditional ground‐level tsunami survey covering all the necessary areas by a single survey team was impractical. This destructive event will undoubtedly provide many opportunities to explore both basic and applied research in tsunami science and engineering fields and will lead to better preparedness for future disasters. A tsunami runup survey was conducted that spans Vedaranniyam (10° 23.5 ′ N) to Vodarevu (15° 47.6 ′ N)—more than 600 km of the southeast Indian coast—which suffered from the distant tsunami, whose source was more than 1,500 km away.
- 1 June 2006
- Published by Wiley in Earthquake Spectra
- Vol. 22 (3S) , 173-186
Tsunami Runup Survey along the Southeast Indian Coast
The 26 December Indian Ocean tsunami was an extraordinary event in the history of natural hazards. It severely affected many countries surrounding the Indian Ocean: Indonesia, Thailand, Malaysia, Myanmar, Bangladesh, India, Sri Lanka, the Maldives, and African countries. Unlike the previous tsunami events in the last 40 years, the seriously affected areas are so vast that a traditional ground‐level tsunami survey covering all the necessary areas by a single survey team was impractical. This destructive event will undoubtedly provide many opportunities to explore both basic and applied research in tsunami science and engineering fields and will lead to better preparedness for future disasters. A tsunami runup survey was conducted that spans Vedaranniyam (10° 23.5 ′ N) to Vodarevu (15° 47.6 ′ N)—more than 600 km of the southeast Indian coast—which suffered from the distant tsunami, whose source was more than 1,500 km away.