Kuthalingam Venkadeshwaran
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kuthalingam Venkadeshwaran has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- R. Rohan
Department of Mechanical Engineering, Faculty of Engineering and Technology, Jain (Deemed to-be-University), Bangalore, Karnataka, India
3 shared publications - Anuar Ishak
Department of Mathematical Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Bangi, Malaysia
2 shared publications - Javali Kotresh Madhukesh
Department of Mathematics, GM University, Davangere, India
2 shared publications - Prakash Ranjan
Department of Mechanical Engineering, Faculty of Engineering and Technology, Jain (Deemed to-be-University), Bangalore, India
2 shared publications - Raman Kumar
Department of Mechanical and Production Engineering, Guru Nanak Dev Engineering College, Ludhiana, Punjab 141006, India. / Department of Mechanical Engineering, Graphic Era (Deemed to be University), Clement Town, Dehradun 248002, India
2 shared publications - Ranjith B. Gowda
Department of ECE, Government CPC Polytechnic
2 shared publications
Latest Publications
- 10 June 2026
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 15 (4) , 1-11
Role of Thermomechanical Treatment on the Sensitization Evolution of High-Mn Austenitic Stainless Steel
- 10 June 2026
- Published by Springer Nature in Metallography, Microstructure, and Analysis
- Vol. 15 (4) , 1-11
Role of Thermomechanical Treatment on the Sensitization Evolution of High-Mn Austenitic Stainless Steel
- Open Access
- 31 March 2026
- Published by Springer Nature in Discover Sustainability
- Vol. 7 (1)
Structure–property relationships and intrinsic antibacterial potential of Saccharum spontaneum fibers toward sustainable biomaterial composites
Natural plant fibers are increasingly explored as sustainable reinforcements for next-generation composite materials. However, the correlation between their structural characteristics and intrinsic bio functional properties remains underexplored. This study systematically investigates Saccharum spontaneum stem fibers to establish structure–property–bioactivity relationships relevant to sustainable composite development. X-ray diffraction analysis confirmed a semi-crystalline cellulose I structure with a dominant (002) reflection at 2θ ≈ 21° and a crystallinity index of ~ 21%, indicating a predominantly amorphous lignocellulosic framework favorable for matrix interaction and surface functionalization. Fourier transform infrared spectroscopy revealed abundant hydroxyl and aromatic functional groups associated with cellulose, hemicellulose, and lignin, suggesting chemically active interfaces that may influence both mechanical bonding and antimicrobial interactions. Mechanical testing demonstrated a tensile strength of 52.17 MPa with a failure strain of 0.023, indicating suitability for non-structural and hybrid polymer composite systems. Thermogravimetric analysis revealed multi-stage degradation with primary polysaccharide decomposition between 300 and 430 °C and stable char formation temperature beyond 700 °C, confirming compatibility with thermoplastic processing such as PLA-based composites. Importantly, the lignocellulosic composition contributing to interfacial adhesion also imparted intrinsic antibacterial activity against Escherichia coli , producing inhibition zones of 28 ± 1 mm and 35 ± 1 mm at 50 µg and 100 µg, respectively. Confocal microscopy further confirmed antibiofilm disruption, linking chemical functionality to biological response. The findings demonstrate that the physicochemical architecture of Saccharum spontaneum fibers simultaneously governs mechanical reinforcement potential and intrinsic antibacterial behavior, supporting their integration into sustainable bio functional composite systems rather than representing independent application domains.
- 31 March 2026
- Published by Springer Nature in Discover Sustainability
- Vol. 7 (1)
Open AccessStructure–property relationships and intrinsic antibacterial potential of Saccharum spontaneum fibers toward sustainable biomaterial composites
Natural plant fibers are increasingly explored as sustainable reinforcements for next-generation composite materials. However, the correlation between their structural characteristics and intrinsic bio functional properties remains underexplored. This study systematically investigates Saccharum spontaneum stem fibers to establish structure–property–bioactivity relationships relevant to sustainable composite development. X-ray diffraction analysis confirmed a semi-crystalline cellulose I structure with a dominant (002) reflection at 2θ ≈ 21° and a crystallinity index of ~ 21%, indicating a predominantly amorphous lignocellulosic framework favorable for matrix interaction and surface functionalization. Fourier transform infrared spectroscopy revealed abundant hydroxyl and aromatic functional groups associated with cellulose, hemicellulose, and lignin, suggesting chemically active interfaces that may influence both mechanical bonding and antimicrobial interactions. Mechanical testing demonstrated a tensile strength of 52.17 MPa with a failure strain of 0.023, indicating suitability for non-structural and hybrid polymer composite systems. Thermogravimetric analysis revealed multi-stage degradation with primary polysaccharide decomposition between 300 and 430 °C and stable char formation temperature beyond 700 °C, confirming compatibility with thermoplastic processing such as PLA-based composites. Importantly, the lignocellulosic composition contributing to interfacial adhesion also imparted intrinsic antibacterial activity against Escherichia coli , producing inhibition zones of 28 ± 1 mm and 35 ± 1 mm at 50 µg and 100 µg, respectively. Confocal microscopy further confirmed antibiofilm disruption, linking chemical functionality to biological response. The findings demonstrate that the physicochemical architecture of Saccharum spontaneum fibers simultaneously governs mechanical reinforcement potential and intrinsic antibacterial behavior, supporting their integration into sustainable bio functional composite systems rather than representing independent application domains.
- 10 February 2026
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
MAGNETIC AND ELECTRICAL EVOLUTION OF CU/NI/CNT NANOCOMPOSITE FABRICATED VIA MECHANICAL ALLOYING PROCESS
In this study, using a mechanical alloying process, various amounts of carbon nanotubes (CNTs) are distributed in the alloy using Cu 40 –Ni 60 particles. The effects of CNTs on nanocomposites are investigated using energy analysis, four-point probe surface magnetometer (VSM), vibrational sample magnetometer, scanning electron microscope (SEM), and X-ray diffraction (XRD) techniques to produce Cu–Ni/CNT nanocomposites. Microstructural study of nanocomposites using 5[ ]h XRD images show that the Cu–Ni–Ni alloy is homogeneous. The effective role of nanotubes in the fineness of the structure is demonstrated for the composite sample containing 5[ ]wt.% of CNTs. The sample containing 5[ ]wt.% of CNTs contains the finest structure, indicating a homogeneous distribution of CNTs through the alloy matrix.
- 10 February 2026
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
MAGNETIC AND ELECTRICAL EVOLUTION OF CU/NI/CNT NANOCOMPOSITE FABRICATED VIA MECHANICAL ALLOYING PROCESS
In this study, using a mechanical alloying process, various amounts of carbon nanotubes (CNTs) are distributed in the alloy using Cu 40 –Ni 60 particles. The effects of CNTs on nanocomposites are investigated using energy analysis, four-point probe surface magnetometer (VSM), vibrational sample magnetometer, scanning electron microscope (SEM), and X-ray diffraction (XRD) techniques to produce Cu–Ni/CNT nanocomposites. Microstructural study of nanocomposites using 5[ ]h XRD images show that the Cu–Ni–Ni alloy is homogeneous. The effective role of nanotubes in the fineness of the structure is demonstrated for the composite sample containing 5[ ]wt.% of CNTs. The sample containing 5[ ]wt.% of CNTs contains the finest structure, indicating a homogeneous distribution of CNTs through the alloy matrix.
- Open Access
- 28 July 2025
- Published by Springer Nature in Research Square
DPV Blends as Sustainable Diesel Alternatives: A Comprehensive Engine Performance and Emissions Study
This study investigates the performance and emission characteristics of Diesel–Plastic Pyrolysis Oil–Vegetable Oil (DPV) blends as sustainable alternatives to fossil diesel. Waste-derived plastic oil (PO), obtained via pyrolysis, was blended with vegetable oils—Soybean oil (SO) and Mahua oil (MO)—to formulate low-viscosity, low-cetane (LVLC) fuels. These blends were evaluated for physicochemical properties, engine performance, and emissions compliance with EN 590:2022 standards. Optimized double blends (PO/SO and PO/MO) were further mixed with fossil diesel in varying proportions to form triple blends, tested in a CI engine under different loads. The results showed that DPV blends improved thermal efficiency and reduced BSFC, with the B60-PSO blend demonstrating a 12% increase in brake thermal efficiency compared to pure diesel. The B60-PSO blend also achieved a 15% reduction in BSFC at a 5 kW load. Emission analysis revealed significant reductions in CO (20%), NOₓ (10%), and soot (40%), while CO₂ emissions slightly increased by 5%, indicating more complete combustion. Among all blends, B60-PSO and B20-PMO achieved the best balance between performance and emissions. The B60-PSO blend showed up to 10% higher thermal efficiency compared to conventional diesel. This study highlights DPV fuels as cost-effective, drop-in replacements for diesel, supporting circular economy principles and aligning with global sustainability goals, offering a scalable interim energy solution during the transition toward cleaner propulsion technologies.
- 28 July 2025
- Published by Springer Nature in Research Square
Open AccessDPV Blends as Sustainable Diesel Alternatives: A Comprehensive Engine Performance and Emissions Study
This study investigates the performance and emission characteristics of Diesel–Plastic Pyrolysis Oil–Vegetable Oil (DPV) blends as sustainable alternatives to fossil diesel. Waste-derived plastic oil (PO), obtained via pyrolysis, was blended with vegetable oils—Soybean oil (SO) and Mahua oil (MO)—to formulate low-viscosity, low-cetane (LVLC) fuels. These blends were evaluated for physicochemical properties, engine performance, and emissions compliance with EN 590:2022 standards. Optimized double blends (PO/SO and PO/MO) were further mixed with fossil diesel in varying proportions to form triple blends, tested in a CI engine under different loads. The results showed that DPV blends improved thermal efficiency and reduced BSFC, with the B60-PSO blend demonstrating a 12% increase in brake thermal efficiency compared to pure diesel. The B60-PSO blend also achieved a 15% reduction in BSFC at a 5 kW load. Emission analysis revealed significant reductions in CO (20%), NOₓ (10%), and soot (40%), while CO₂ emissions slightly increased by 5%, indicating more complete combustion. Among all blends, B60-PSO and B20-PMO achieved the best balance between performance and emissions. The B60-PSO blend showed up to 10% higher thermal efficiency compared to conventional diesel. This study highlights DPV fuels as cost-effective, drop-in replacements for diesel, supporting circular economy principles and aligning with global sustainability goals, offering a scalable interim energy solution during the transition toward cleaner propulsion technologies.
- Open Access
- 1 April 2025
- Published by Iskenderun Technical University in Natural and Engineering Sciences
- Vol. 10 (1) , 231-243
Exploring Heavy Metal Contamination in Aquatic Ecosystems and Its Implications for Fish Consumption
Research explores the contamination of aquatic ecosystems by various heavy metals and the potential health risks to humans from consuming fish. Twelve heavy metalloids were found in 200 samples of both wild and farmed fish species, including arsenic (As), cadmium (Cd), lead (Pb), mercury (Hg), nickel (Ni), copper (Cu), zinc (Zn), chromium (Cr), manganese (Mn), iron (Fe), aluminum (Al), and cobalt (Co). Several metals exceeded safe intake standards, and the research showed that contamination levels varied among species. Specifically, some fish species had greater concentrations of Hg and Pb, whereas the ones that lived in deeper, stagnant waters exhibited notable accumulations of Mn, Fe, and Co. The bioaccumulation of these contaminants might be facilitated by artificial feeding techniques and limited water conditions, as evidenced by the significant link between sediment pollution and metal accumulation in farmed fish. Because of the varied habitats and feeding habits, wild fish showed more varied contamination patterns. Although the majority of metals' target hazard quotients (THQs) were below acceptable bounds, several fish species showed higher Pb and Cd concentrations, which might be harmful to long-term health. A low risk of cancer was indicated by the carcinogenic risk indices for Ni, As, and Co getting below the safety threshold of 10⁻⁴. The research underscores the need to monitor species with higher bioaccumulation susceptibility and reduce metal contamination in aquaculture. It emphasizes the need for further research on chronic heavy metal exposure, biological and environmental factors, and health implications.
- 1 April 2025
- Published by Iskenderun Technical University in Natural and Engineering Sciences
- Vol. 10 (1) , 231-243
Open AccessExploring Heavy Metal Contamination in Aquatic Ecosystems and Its Implications for Fish Consumption
Research explores the contamination of aquatic ecosystems by various heavy metals and the potential health risks to humans from consuming fish. Twelve heavy metalloids were found in 200 samples of both wild and farmed fish species, including arsenic (As), cadmium (Cd), lead (Pb), mercury (Hg), nickel (Ni), copper (Cu), zinc (Zn), chromium (Cr), manganese (Mn), iron (Fe), aluminum (Al), and cobalt (Co). Several metals exceeded safe intake standards, and the research showed that contamination levels varied among species. Specifically, some fish species had greater concentrations of Hg and Pb, whereas the ones that lived in deeper, stagnant waters exhibited notable accumulations of Mn, Fe, and Co. The bioaccumulation of these contaminants might be facilitated by artificial feeding techniques and limited water conditions, as evidenced by the significant link between sediment pollution and metal accumulation in farmed fish. Because of the varied habitats and feeding habits, wild fish showed more varied contamination patterns. Although the majority of metals' target hazard quotients (THQs) were below acceptable bounds, several fish species showed higher Pb and Cd concentrations, which might be harmful to long-term health. A low risk of cancer was indicated by the carcinogenic risk indices for Ni, As, and Co getting below the safety threshold of 10⁻⁴. The research underscores the need to monitor species with higher bioaccumulation susceptibility and reduce metal contamination in aquaculture. It emphasizes the need for further research on chronic heavy metal exposure, biological and environmental factors, and health implications.
- 25 January 2025
- Published by Springer Nature in Pramana
- Vol. 99 (1) , 1-15
Heat transfer analysis of a fully wetted inclined moving fin with temperature-dependent internal heat generation using DTM-Pade approximant and machine learning algorithms
- 25 January 2025
- Published by Springer Nature in Pramana
- Vol. 99 (1) , 1-15
Heat transfer analysis of a fully wetted inclined moving fin with temperature-dependent internal heat generation using DTM-Pade approximant and machine learning algorithms
- 16 January 2025
- Published by Springer Nature in Journal of the Korean Physical Society
- Vol. 86 (5) , 372-382
A numerical study on the radiative flow of magneto-Casson fluid via a vertical microchannel with entropy generation
- 16 January 2025
- Published by Springer Nature in Journal of the Korean Physical Society
- Vol. 86 (5) , 372-382
A numerical study on the radiative flow of magneto-Casson fluid via a vertical microchannel with entropy generation
- 11 December 2024
- Published by Springer Nature in BioNanoScience
- Vol. 15 (1) , 1-11
Hydromagnetic Convective and Radiative Heat Transfer in Fe3O4 -CoFe2O4/H2O Flow Over a Permeable Surface
- 11 December 2024
- Published by Springer Nature in BioNanoScience
- Vol. 15 (1) , 1-11
Hydromagnetic Convective and Radiative Heat Transfer in Fe3O4 -CoFe2O4/H2O Flow Over a Permeable Surface
- 4 December 2024
- Published by World Scientific Pub Co Pte Ltd in Nano
Sensitive One-Dimensional Photonic Crystal Refractometric Temperature Sensor with Central Superconducting Layer
This work proposes a sensitive low-temperature sensor based on the refractive index (RI) method. It uses a one-dimensional (1D) photonic crystal (PC) structure. The proposed sensor design consists of a bilayer stack of dielectric and superconductor materials. YaBa2Cu3O7 is the superconductor utilized in this case, and we consider air to be the dielectric material. The RI of air doesn’t change much with the temperature, especially compared to the superconductor material. YaBa2Cu3O7 is a superconductor that is ideal for temperature sensing applications because of its temperature-dependent RI. The sensing temperature range for the proposed sensor is 35–70[ ]K. The crucial structural factors have been precisely adjusted to increase sensing performance. Based on our knowledge, this is done to increase the sensor’s efficiency to levels that are higher than anything previously reported in the literature. Results show that the designed structure achieves an impressive RI sensitivity of 821.53[ ]nm/RIU and a temperature sensitivity of 3[ ]nm/K. This sensor could be very useful for medical applications for the detection of low temperatures.
- 4 December 2024
- Published by World Scientific Pub Co Pte Ltd in Nano
Sensitive One-Dimensional Photonic Crystal Refractometric Temperature Sensor with Central Superconducting Layer
This work proposes a sensitive low-temperature sensor based on the refractive index (RI) method. It uses a one-dimensional (1D) photonic crystal (PC) structure. The proposed sensor design consists of a bilayer stack of dielectric and superconductor materials. YaBa2Cu3O7 is the superconductor utilized in this case, and we consider air to be the dielectric material. The RI of air doesn’t change much with the temperature, especially compared to the superconductor material. YaBa2Cu3O7 is a superconductor that is ideal for temperature sensing applications because of its temperature-dependent RI. The sensing temperature range for the proposed sensor is 35–70[ ]K. The crucial structural factors have been precisely adjusted to increase sensing performance. Based on our knowledge, this is done to increase the sensor’s efficiency to levels that are higher than anything previously reported in the literature. Results show that the designed structure achieves an impressive RI sensitivity of 821.53[ ]nm/RIU and a temperature sensitivity of 3[ ]nm/K. This sensor could be very useful for medical applications for the detection of low temperatures.