Tomáš Bittner
Research Interests
Tomáš Bittner has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Dita Jiroutová
Klokner Institute, Czech Technical University in Prague, Prague 6 - Dejvice, Czech Republic
1 shared publication - Karel Hurtig
Ph.D. Candidate, Dept. of Experimental and Measurement Methods, Klokner Institute, Czech Technical Univ. in Prague, Šolínova 7, 166 08 Prague 6, Czech Republic. ORCID:
1 shared publication - Tomáš Jirout
Department of Process Engineering, Czech Technical University in Prague, 16600 Prague, Czech Republic
1 shared publication
Latest Publications
- Open Access
- 22 December 2023
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (6) , 819-826
Methodology of Analysis of Fibre Sedimentation in HPC mixtures
The aim of this work is to propose a methodology for evaluating inhomogeneity due to the sedimentation of fibres in High-Performnce Concrete (HPC) mixtures. HPC mixtures makes better mechanicalphysical properties than ordinary concrete. To achieve higher strengths, the fine-grained matrix is reinforced with the reinforcement-fibres. The type of used fibres and their homogenization in mixture has an influence on the final mechanical properties of HPC mixture. Four concrete mixtures with same component proportion was chosen for experiments. Water was the only one component, that was changing in mixture recipes. Steel fibres with a ratio of the diameter to length = 0.3/20 were used as reinforcement. The fibre volume in mixture was 1.5 %. The microscopy analysis was used for evaluation of the fibre distribution in the test specimens. It was obtained, that the concentration of the fibres increases with distance from the surface to the bottom of the HPC structure and this non-homogeneity increases with higher water dosage. The dependence of sedimentation of fibres on composition of HPC mixtures can be used for evaluation and optimization of final mechanical properties of the HPC structures.
- 22 December 2023
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (6) , 819-826
Open AccessMethodology of Analysis of Fibre Sedimentation in HPC mixtures
The aim of this work is to propose a methodology for evaluating inhomogeneity due to the sedimentation of fibres in High-Performnce Concrete (HPC) mixtures. HPC mixtures makes better mechanicalphysical properties than ordinary concrete. To achieve higher strengths, the fine-grained matrix is reinforced with the reinforcement-fibres. The type of used fibres and their homogenization in mixture has an influence on the final mechanical properties of HPC mixture. Four concrete mixtures with same component proportion was chosen for experiments. Water was the only one component, that was changing in mixture recipes. Steel fibres with a ratio of the diameter to length = 0.3/20 were used as reinforcement. The fibre volume in mixture was 1.5 %. The microscopy analysis was used for evaluation of the fibre distribution in the test specimens. It was obtained, that the concentration of the fibres increases with distance from the surface to the bottom of the HPC structure and this non-homogeneity increases with higher water dosage. The dependence of sedimentation of fibres on composition of HPC mixtures can be used for evaluation and optimization of final mechanical properties of the HPC structures.