OUOlivier Uteza

Olivier Uteza

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Olivier Uteza has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Femtosecond laser irradiation of thin Ge2Sb2Te5−x films: Amorphization and morphological evolution

    by F. Mignerot, M. Texier, S. Comby-Dassonneville, T. Fernandes, P. Hans, C. Mocuta, Y. Le-Friec, P. Boivin, S. Jeannot, O. Uteza, et al.

    This study explores the amorphization of a Te-poor Ge–Sb–Te alloy using single 800 nm femtosecond laser pulses. Before irradiation, the phase composition and microstructure of the investigated sample were characterized using synchrotron x-ray diffraction and high-resolution transmission electron microscopy. The threshold fluence required for amorphization with a single laser shot was identified, with a minimum fluence of ∼45 mJ cm−2 necessary to induce structural changes. At higher fluences (≥83 mJ cm−2), surface blistering and layer delamination occurred, also due to laser absorption by the TiN capping layer. This study revealed partial amorphization localized preferentially in the upper part of the layer with a few crystalline residuals closer to the substrate. The formation of cavities in the amorphized zones, close to the interface with the TiN layer, is supposed to be responsible for the delamination of the latter observed in the center of the irradiated zone. No long-range elemental diffusion was observed post-irradiation. These results provide valuable insights into the structural changes that can be induced by femtosecond laser irradiation in Ge–Sb–Te alloys.

  • Open Access

    High flux sub-picosecond laser-based hard x-ray platform for advanced material analysis and imaging

    by O. Utéza, R. Clady, Y. Azamoum, M. Gambari, A. Ferré, O. Peyrusse, M. Sentis

    Ultrashort laser platforms equipped with in situ, in-operando diagnostics are pivotal for advancing the frontiers of modern laser-based engineering. Aligned with this objective, we developed the LP3-ASUR platform, which combines moderate (∼1013 W/cm2) and high-intensity laser beamlines (∼1017–2.5 × 1019 W/cm2), enabling pump–probe arrangements with modular (optical/x-ray) time-resolved diagnostics. We demonstrate high-repetition rate (100 Hz), high-brilliance, hard Kα x-ray sources induced by laser-plasma interaction. Favorably, they can be synchronized with optical pump and probe laser pulses and are jitter-free with respect to them thanks to the multi-beamline, low- and high-peak power architecture of the laser platform. For x-ray analysis and imaging, these characteristics enable a high signal-to-noise ratio and minimize the need for long accumulation times, allowing for addressing demanding scientific cases. Building such a platform encompassed efforts of research and development involving the laser system, the x-ray conversion targetry, and the formatting of x-ray source characteristics under various operation conditions. To have robust and stable x-ray tools with pulsed, well-defined characteristics, the x-ray targetry is operated in front-face geometry with a massive laser–x-ray converter material. In such a configuration, a hard Kα x-ray source delivering peak performances of 109 photons/sr/shot at the repetition-rate of 100 Hz with a few-hundred femtosecond duration is routinely obtained and implemented in flexible pump–probe analytical experiments and x-ray imaging protocols operated in air. Finally, two descriptive measurements highlight the platform’s ability to perform cutting-edge diagnostics, opening the door for innovative imaging and improved understanding of electron and lattice dynamics in solid materials exposed to external laser irradiation.

  • Open Access

    Exploring fs-laser irradiation damage subthreshold behavior of dielectric mirrors via electrical measurements

    by Petrisor Gabriel Bleotu, Radu Udrea, Alice Dumitru, Olivier Uteza, Maria-Diana Mihai, Dan Gh. Matei, Daniel Ursescu, Stefan Irimiciuc, Valentin Craciun

    With ultrafast laser systems reaching presently 10 PW peak power or operating at high repetition rates, research towards ensuring the long-term, trouble-free performance of all laser-exposed optical components is critical. Our work is focused on providing insight into the optical material behavior at fluences below the standardized laser-induced damage threshold (LIDT) value by implementing a simultaneous dual analysis of surface emitted particles using a Langmuir probe (LP) and the target current (TC). ${\mathrm{HfO}}_2$ and ${\mathrm{ZrO}}_2$ thin films deposited on fused silica substrates by pulsed laser deposition at various ${\mathrm{O}}_2$ pressures for defect and stoichiometry control were irradiated by Gaussian, ultrashort laser pulses (800 nm, 10 Hz, 70 fs) in a wide range of fluences. Both TC and LP collected signals were in good agreement with the existing theoretical description of laser–matter interaction at an ultrashort time scale. Our approach for anin situLIDT monitoring system provides measurable signals for below-threshold irradiation conditions that indicate the endurance limit of the optical surfaces in the single-shot energy scanning mode. The LIDT value extracted from the LP-TC system is in line with the multipulse statistical analysis done with ISO 21254-2:2011(E). The implementation of the LP and TC as on-shot diagnostic tools for optical components will have a significant impact on the reliability of next-generation ultrafast and high-power laser systems.