Edyta Nizio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Edyta Nizio has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Kamil Czwartkowski
Department of Agroengineering and Quality Analysis, Faculty of Production Engineering, Wroclaw University of Economics and Business, Komandorska 118/120, 53-345 Wroclaw, Poland
6 shared publications - Wojciech Golimowski
Department of Agroengineering and Quality Analysis, Faculty of Production Engineering, Wroclaw University of Economics and Business, Komandorska 118/120, 53-345 Wroclaw, Poland
5 shared publications - Damian Marcinkowski
Department of Inorganic Chemistry, Faculty of Production Engineering, Wroclaw University of Economics and Business, Komandorska 118/120, 53-345 Wroclaw, Poland
4 shared publications - Aleksander Siger
Department of Food Biochemistry and Analysis, Faculty of Food Science and Nutrition, Poznań University of Life Sciences, Poznan, Poland
3 shared publications - Anna Grygier
Faculty of Food Science and Nutrition, Poznan University of Life Sciences, Wojska Polskiego 28, 60-637 Poznan, Poland
3 shared publications - Dominik Kmiecik
Faculty of Food Science and Nutrition, Poznan University of Life Sciences, Wojska Polskiego 28, 60-637 Poznan, Poland
3 shared publications
Latest Publications
- Open Access
- 30 October 2026
- Published by Springer Nature in Scientific Reports
Improving edible oil quality by low- and high-temperature selective adsorption on the example of walnut oil (Juglans regia L.)
This study evaluated the effects of adsorbent type, dosage, and temperature on walnut oil quality and selected bioactive compounds. Adsorption efficiency depended on the combination of processing conditions, with statistically significant effects observed for individual factors and their interactions. Differences among adsorbents may be related to their composition and surface properties, which were not directly characterised in this study. The relative effects of temperature and adsorbent dosage varied depending on the adsorbent and parameter analysed. Treatment at a relatively low temperature (approximately 30 °C), combined with an appropriate adsorbent dosage, may help improve selected quality characteristics while retaining valuable bioactive compounds. However, carotenoid and tocopherol retention varied among adsorbents, and no single treatment condition was optimal for all parameters. Overall, walnut oil adsorption requires joint consideration of adsorbent type, dosage, and temperature. Further research should characterise adsorbent surface properties and evaluate the oxidative stability of treated oil to clarify the mechanisms underlying the observed changes and their implications for oil quality.
- 30 October 2026
- Published by Springer Nature in Scientific Reports
Open AccessImproving edible oil quality by low- and high-temperature selective adsorption on the example of walnut oil (Juglans regia L.)
This study evaluated the effects of adsorbent type, dosage, and temperature on walnut oil quality and selected bioactive compounds. Adsorption efficiency depended on the combination of processing conditions, with statistically significant effects observed for individual factors and their interactions. Differences among adsorbents may be related to their composition and surface properties, which were not directly characterised in this study. The relative effects of temperature and adsorbent dosage varied depending on the adsorbent and parameter analysed. Treatment at a relatively low temperature (approximately 30 °C), combined with an appropriate adsorbent dosage, may help improve selected quality characteristics while retaining valuable bioactive compounds. However, carotenoid and tocopherol retention varied among adsorbents, and no single treatment condition was optimal for all parameters. Overall, walnut oil adsorption requires joint consideration of adsorbent type, dosage, and temperature. Further research should characterise adsorbent surface properties and evaluate the oxidative stability of treated oil to clarify the mechanisms underlying the observed changes and their implications for oil quality.
- Open Access
Environmental Behavior, Toxicological Pathways, and Risk Assessment of Polycyclic Aromatic Hydrocarbons (PAHs): From Molecular Structure to Human Health
Polycyclic aromatic hydrocarbons (PAHs) represent a major class of ubiquitous environmental pollutants, posing significant risks to ecosystems and human health due to their persistence, toxicity, and potential for bioaccumulation. This review provides a comprehensive synthesis of current scientific knowledge on PAHs, integrating insights from chemical kinetics, environmental fate, and toxicological mechanisms. The fundamental structural chemistry of PAHs and its direct influence on their physicochemical properties and environmental properties are discussed. The major anthropogenic and natural sources of PAHs are detailed, alongside the chemical kinetics behind their formation during incomplete combustion and their transformation in environmental media. Unlike previous reviews that address PAH sources, remediation, or health effects as separate topics, this review uniquely traces the mechanistic continuum from molecular formation kinetics through physicochemical partitioning and environmental transport to toxicological endpoints, providing a causally linked framework for understanding how structural properties ultimately determine biological outcomes. A central focus is placed on the environmental fate and transport of PAHs across atmospheric, aquatic, and terrestrial compartments, highlighting processes such as gas–particle partitioning, sediment accumulation, and long-range transport. The review further elucidates the complex toxicological pathways of PAHs, including metabolic activation to reactive intermediates, DNA adduct formation, oxidative stress, and their roles in carcinogenesis and other systemic health effects. The analysis reveals strong scientific consensus on the carcinogenic mechanism of parent PAHs via CYP450-mediated metabolic activation to diol-epoxide intermediates while identifying critical areas of uncertainty: the current regulatory framework based on 16 priority PAHs underestimates total carcinogenic risk by a factor of 2–5, mixture toxicology remains poorly characterized, and dose–response relationships for non-cancer endpoints (cardiovascular, neurodevelopmental, immunotoxic) lack the quantitative data needed for robust risk assessment. Finally, human exposure pathways and health risk characterization approaches are discussed, highlighting the need for cumulative, mixture-based assessment frameworks.
Open AccessEnvironmental Behavior, Toxicological Pathways, and Risk Assessment of Polycyclic Aromatic Hydrocarbons (PAHs): From Molecular Structure to Human Health
Polycyclic aromatic hydrocarbons (PAHs) represent a major class of ubiquitous environmental pollutants, posing significant risks to ecosystems and human health due to their persistence, toxicity, and potential for bioaccumulation. This review provides a comprehensive synthesis of current scientific knowledge on PAHs, integrating insights from chemical kinetics, environmental fate, and toxicological mechanisms. The fundamental structural chemistry of PAHs and its direct influence on their physicochemical properties and environmental properties are discussed. The major anthropogenic and natural sources of PAHs are detailed, alongside the chemical kinetics behind their formation during incomplete combustion and their transformation in environmental media. Unlike previous reviews that address PAH sources, remediation, or health effects as separate topics, this review uniquely traces the mechanistic continuum from molecular formation kinetics through physicochemical partitioning and environmental transport to toxicological endpoints, providing a causally linked framework for understanding how structural properties ultimately determine biological outcomes. A central focus is placed on the environmental fate and transport of PAHs across atmospheric, aquatic, and terrestrial compartments, highlighting processes such as gas–particle partitioning, sediment accumulation, and long-range transport. The review further elucidates the complex toxicological pathways of PAHs, including metabolic activation to reactive intermediates, DNA adduct formation, oxidative stress, and their roles in carcinogenesis and other systemic health effects. The analysis reveals strong scientific consensus on the carcinogenic mechanism of parent PAHs via CYP450-mediated metabolic activation to diol-epoxide intermediates while identifying critical areas of uncertainty: the current regulatory framework based on 16 priority PAHs underestimates total carcinogenic risk by a factor of 2–5, mixture toxicology remains poorly characterized, and dose–response relationships for non-cancer endpoints (cardiovascular, neurodevelopmental, immunotoxic) lack the quantitative data needed for robust risk assessment. Finally, human exposure pathways and health risk characterization approaches are discussed, highlighting the need for cumulative, mixture-based assessment frameworks.
- Open Access
Analysis of Quality Distinctions of Pumpkin Seed Oil (Cucurbita pepo var. oleifera) and Walnut Oil (Juglans regia L.)
The study aimed to characterize the quality and evaluate the content of bioactive substances in cold-pressed pumpkin seed and walnut oils obtained from the specific varieties (Cucurbita pepo var. oleifera and Juglans regia L.). The analyses included the determination of acid value, peroxide value, and anisidine value. The content of chlorophylls and carotenoids was identified, and the fatty acid, phytosterol, and tocopherol profiles were characterized. The results were subjected to principal component analysis and compared with the physicochemical parameters of other popular niche oils. It was shown that both oils tested have unique, relatively simple fatty acid profiles (only 5–6 dominant acids were identified). In addition, significant differences in squalene content were observed: pumpkin seed oil showed a higher concentration than other vegetable oils. In contrast, walnut oil was found to lack squalene, which is atypical among the analyzed niche oils.
Open AccessAnalysis of Quality Distinctions of Pumpkin Seed Oil (Cucurbita pepo var. oleifera) and Walnut Oil (Juglans regia L.)
The study aimed to characterize the quality and evaluate the content of bioactive substances in cold-pressed pumpkin seed and walnut oils obtained from the specific varieties (Cucurbita pepo var. oleifera and Juglans regia L.). The analyses included the determination of acid value, peroxide value, and anisidine value. The content of chlorophylls and carotenoids was identified, and the fatty acid, phytosterol, and tocopherol profiles were characterized. The results were subjected to principal component analysis and compared with the physicochemical parameters of other popular niche oils. It was shown that both oils tested have unique, relatively simple fatty acid profiles (only 5–6 dominant acids were identified). In addition, significant differences in squalene content were observed: pumpkin seed oil showed a higher concentration than other vegetable oils. In contrast, walnut oil was found to lack squalene, which is atypical among the analyzed niche oils.
- Open Access
The Influence of the Adsorbents Used on Changes in the Quality Parameters of Pumpkin Seed Oil as a Result of a Single-Stage Refining Process
This study aimed to evaluate the impact of low- and high-temperature bleaching processes on the quality parameters of pumpkin seed oil. The research focused on optimizing the process to improve the oil’s physicochemical properties while reducing losses of valuable bioactive components. The bleaching process was carried out using 12 adsorbents in four technological variants, differing in temperature and adsorbent amount (30 °C/2% w/w, 30 °C/5%, 90 °C/2%, and 90 °C/5%). The scope of the analyses included, among others, the determination of acid (AV), peroxide (POV), and anisidine values (AnV), as well as the characterization of the fatty acid profile and the content of phytosterols and tocopherols. The data obtained were subjected to principal component analysis (PCA) to correlate the type of adsorbent with the process effects. It was shown that bleaching partially improves the oil’s quality parameters, though it is associated with a reduction in tocopherol and carotenoid content. Aluminum oxides are very poor adsorbents of vegetable oil components. Finely divided activated carbons exhibit the broadest spectrum of adsorbed components. Furthermore, bleaching earths have different effects on oil components depending on their composition and process temperature.
Open AccessThe Influence of the Adsorbents Used on Changes in the Quality Parameters of Pumpkin Seed Oil as a Result of a Single-Stage Refining Process
This study aimed to evaluate the impact of low- and high-temperature bleaching processes on the quality parameters of pumpkin seed oil. The research focused on optimizing the process to improve the oil’s physicochemical properties while reducing losses of valuable bioactive components. The bleaching process was carried out using 12 adsorbents in four technological variants, differing in temperature and adsorbent amount (30 °C/2% w/w, 30 °C/5%, 90 °C/2%, and 90 °C/5%). The scope of the analyses included, among others, the determination of acid (AV), peroxide (POV), and anisidine values (AnV), as well as the characterization of the fatty acid profile and the content of phytosterols and tocopherols. The data obtained were subjected to principal component analysis (PCA) to correlate the type of adsorbent with the process effects. It was shown that bleaching partially improves the oil’s quality parameters, though it is associated with a reduction in tocopherol and carotenoid content. Aluminum oxides are very poor adsorbents of vegetable oil components. Finely divided activated carbons exhibit the broadest spectrum of adsorbed components. Furthermore, bleaching earths have different effects on oil components depending on their composition and process temperature.
- Open Access
- 28 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (11) , 6098
Computer-Assisted Smoking Process: The Influence of the Smoking Process on the Physical Parameters of Smoked Products
Smoking food products is one of the methods of preserving them and giving them unique qualities. The proper selection of process parameters significantly affects the sensory attributes of the products, as well as their health benefits. An experimental station was built and verified to optimize the process parameters to monitor the smoking process. The purpose of the publication is to present an experimental station that will be used for optimization studies of the parameters of the processing of food products by smoking. The condition parameters, i.e., temperature and smoke level, were monitored. The products (pork loin, feta cheese, Camembert, Italian-type cheese, and curd) after smoking were analyzed from a qualitative point of view. The weight loss, change in the product’s moisture content, and color change were measured. The measurements proved the stability of the process parameters for the 12 samples of meat and cheese of regular size and that a uniform amount of smoke penetrated them at comparable temperatures. A comparison was also made between changes in the basic physical parameters of the meat and cheese during smoking. The change in the physical parameters of the pork loin was used as a reference point for changes in these parameters in other products.
- 28 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (11) , 6098
Open AccessComputer-Assisted Smoking Process: The Influence of the Smoking Process on the Physical Parameters of Smoked Products
Smoking food products is one of the methods of preserving them and giving them unique qualities. The proper selection of process parameters significantly affects the sensory attributes of the products, as well as their health benefits. An experimental station was built and verified to optimize the process parameters to monitor the smoking process. The purpose of the publication is to present an experimental station that will be used for optimization studies of the parameters of the processing of food products by smoking. The condition parameters, i.e., temperature and smoke level, were monitored. The products (pork loin, feta cheese, Camembert, Italian-type cheese, and curd) after smoking were analyzed from a qualitative point of view. The weight loss, change in the product’s moisture content, and color change were measured. The measurements proved the stability of the process parameters for the 12 samples of meat and cheese of regular size and that a uniform amount of smoke penetrated them at comparable temperatures. A comparison was also made between changes in the basic physical parameters of the meat and cheese during smoking. The change in the physical parameters of the pork loin was used as a reference point for changes in these parameters in other products.
- Open Access
- 31 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 390
The Influence of the Used Bleaching Earth on the Content of Natural Dyes in Hemp (Cannabis sativa L.) Oils
Cold-pressed hemp oils are characterized by an intense color, which is undesirable when used directly. Therefore, research was undertaken on removing chlorophyll and carotenoids effectively. This publication presents the results of tests that verified the adsorption properties of seven bleaching earths (BE1–BE7) in two doses (2.5% and 5.0%) in the low-temperature bleaching process of hemp oils. These oils were obtained by cold and hot pressing of the seeds of three varieties of hemp (Cannabis sativa L.): Finola, Earlina 8FC, and Secuieni Jubileu. The color change and the content of carotenoid and chlorophyll pigments in the bleached oils were verified using the colorimetric method (CIE-Lab). The BEs used had different abilities to reduce the content of natural dyes connected with oil decolorization. The conducted research allowed us to characterize the influence of BEs on the organoleptic properties of the tested oils. Hemp oil obtained from the Secuieni Jubileu CP and HP hemp variety should be bleached with unmodified magnesian bentonite at 2.5%. Unmodified attapulgite clay is not recommended for this variety, as it strongly adsorbs carotenoids from the oil.
- 31 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 390
Open AccessThe Influence of the Used Bleaching Earth on the Content of Natural Dyes in Hemp (Cannabis sativa L.) Oils
Cold-pressed hemp oils are characterized by an intense color, which is undesirable when used directly. Therefore, research was undertaken on removing chlorophyll and carotenoids effectively. This publication presents the results of tests that verified the adsorption properties of seven bleaching earths (BE1–BE7) in two doses (2.5% and 5.0%) in the low-temperature bleaching process of hemp oils. These oils were obtained by cold and hot pressing of the seeds of three varieties of hemp (Cannabis sativa L.): Finola, Earlina 8FC, and Secuieni Jubileu. The color change and the content of carotenoid and chlorophyll pigments in the bleached oils were verified using the colorimetric method (CIE-Lab). The BEs used had different abilities to reduce the content of natural dyes connected with oil decolorization. The conducted research allowed us to characterize the influence of BEs on the organoleptic properties of the tested oils. Hemp oil obtained from the Secuieni Jubileu CP and HP hemp variety should be bleached with unmodified magnesian bentonite at 2.5%. Unmodified attapulgite clay is not recommended for this variety, as it strongly adsorbs carotenoids from the oil.
- Open Access
- 15 December 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (24) , 16890
Impact of Smoking Technology on the Quality of Food Products: Absorption of Polycyclic Aromatic Hydrocarbons (PAHs) by Food Products during Smoking
The food industry is striving for a sustainable development of thermal food processing. Smoking is an example of a process that has grown in popularity in recent years. There is a lack of systematic knowledge in the literature regarding this undervalued process, so the purpose of this review is to analyze the state of knowledge about the methods and technologies of smoking food products and their impact on changing the quality of essential food products. Therefore, a comprehensive review of the literature on smoking processes from the past two decades was conducted. The most essential components absorbed from smoke during smoking are polycyclic aromatic hydrocarbons (PAHs). In the present work, 24 PAHs are summarized, and the capability of 12 food products to absorb them is described. Analysis of the principal components of absorbed PAHs showed that some products from different groups exhibit a similar ability to absorb these compounds, mainly influenced by their physical properties. The pre-treatment practices of raw materials before smoking, the smoking raw materials used, and their quality parameters were characterized (along with the effects of smoking methods on selected product groups: fish, meats, and cheeses). In addition, the gap in research concerning the absorption of other components of smoke, e.g., phenols, alcohols, ketones, and aldehydes, which directly impact food quality, is indicated.
- 15 December 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (24) , 16890
Open AccessImpact of Smoking Technology on the Quality of Food Products: Absorption of Polycyclic Aromatic Hydrocarbons (PAHs) by Food Products during Smoking
The food industry is striving for a sustainable development of thermal food processing. Smoking is an example of a process that has grown in popularity in recent years. There is a lack of systematic knowledge in the literature regarding this undervalued process, so the purpose of this review is to analyze the state of knowledge about the methods and technologies of smoking food products and their impact on changing the quality of essential food products. Therefore, a comprehensive review of the literature on smoking processes from the past two decades was conducted. The most essential components absorbed from smoke during smoking are polycyclic aromatic hydrocarbons (PAHs). In the present work, 24 PAHs are summarized, and the capability of 12 food products to absorb them is described. Analysis of the principal components of absorbed PAHs showed that some products from different groups exhibit a similar ability to absorb these compounds, mainly influenced by their physical properties. The pre-treatment practices of raw materials before smoking, the smoking raw materials used, and their quality parameters were characterized (along with the effects of smoking methods on selected product groups: fish, meats, and cheeses). In addition, the gap in research concerning the absorption of other components of smoke, e.g., phenols, alcohols, ketones, and aldehydes, which directly impact food quality, is indicated.