HLHaiming Lv

Haiming Lv

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Haiming Lv has a total of 101 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    An aqueous battery using an electrolyte with a pH of 7 and suitable for direct environmental discard

    by Hui Chen, Shuo Feng, Yutong Wang, Leheng Zhong, Wei Liang, Kangning Shi, Dedi Li, Jiaxiong Zhu, Huiling Cui, Zijie Tang, et al.

    The electrolytes of aqueous batteries are mostly acidic or alkaline, resulting in inevitable side reactions. More importantly, when batteries are disposed of, strongly acidic and alkaline solutions harm the environment. In this study, we synthesized covalent organic polymers as negative electrode materials for aqueous divalent ion (Mg2+ and Ca2+) storage, which exhibit favorable performance in electrolytes with a pH of 7.0 (the electrolytes are environmentally benign and can even be “brine” in tofu production). Polymers containing electron-donating linking bonds exhibit fast kinetics and low potential for use in aqueous Mg2+/Ca2+ batteries. In neutral electrolytes (pH = 7.0), Hexaketone-tetraaminodibenzo-p-dioxin covalent organic polymers exhibit 120,000 cycles and deliver specific capacities (up to 112.8 mA h g-1). The negative electrode was paired with a positive electrode, creating a full cell that has a voltage interval of 2.2 V and achieves a specific energy of up to 48.3 Wh kg-1, which is calculated on the basis of the total mass of the negative electrode, positive electrode, and electrolyte at the full cell level, together with long-term cycling stability over 120,000 cycles at a specific current of 20 A g-1. The full cells are environmentally benign and nontoxic and can be directly discarded to environments according to various standards (GB 18599-2020, ISO 14001, Resource Conservation and Recovery Act RCRA, US).


  • Open Access

    Catalytic electrolytes enable fast reaction kinetics and temperature adaptability for aqueous zinc-bromine flow batteries

    by Zhiquan Wei, Ze Chen, Yiqiao Wang, Xinru Yang, Dedi Li, Zhuoxi Wu, Shaoce Zhang, Xintao Ma, Hu Hong, Yue Hou, et al.

    Catalysts are widely used to improve electrode reactions in static batteries. However, due to aqueous flow batteries utilizing large volumes of electrolytes, previously reported non-flowable solid-phase catalysts are inadequate for addressing challenges such as low conversion ratios and electrolyte failure, especially under low-temperature conditions. Herein, we develop functionalized carbon quantum dot–based colloidal catalytic electrolytes for Zn–Br flow batteries. This approach deviates from conventional catalyst particles anchored on electrodes, which functions both in-electrolyte and at-interface, enhancing interactions between Br-redox pairs and active sites to accelerate Br-based reaction kinetics and optimize low-temperature adaptability. Unlike common Zn–Br systems, those using highly stable carboxyl-functionalized carbon quantum dot catalytic electrolytes exhibit a substantial increase in power density to 389.88 mW·cm−2. Furthermore, Zn–Br systems incorporating this catalytic electrolyte show a working lifespan of >1982 h (5000 cycles) at 100 mA·cm−2 and maintain operation at 80 mA·cm−2 with an energy efficiency of 82.4%. These systems can operate for 1920 h (2000 cycles; energy efficiency: 74.2%) at 40 mA·cm−2 with minimal capacity decay at −20 °C, attributable to the rearranged hydrogen-bonding networks within catalytic electrolytes. The effectiveness of carbon quantum dot catalytic electrolytes is further validated across various functional groups (carboxyl and hydroxyl).


  • Open Access

    Correction: A ternary Cu alloy current collector for high-performance aqueous Zn-ion batteries

    by Kangning Shi, Wei Liang, Haiming Lv (Lyu), Ying Fu

    Correction for ‘A ternary Cu alloy current collector for high-performance aqueous Zn-ion batteries’ by Kangning Shi et al. , Chem. Commun. , 2025, https://doi.org/10.1039/d5cc04519c.

  • A ternary Cu alloy current collector for high-performance aqueous Zn-ion batteries

    by Kangning Shi, Wei Liang, Haiming Lv (Lyu), Ying Fu

    A ternary Cu–In–Sn alloy current collector strategy has been developed to suppress dendrite growth and enhance electrochemical performance.


  • An Electrochromic Pure Poly(N-phenylglycine) with a High Optical Modulation Amplitude, a Wide Color Gamut, and Safe Raw Material Accessibility

    by Hongyu Qin, Xiaoyang Chen, Fei Gao, Qifan Liu, Haiming Lv, Yan Huang

    Conductive polymer-based electrochromic materials (ECMs), distinguished by their wide color tunability and low cost, are limited particularly in terms of their optical modulation range and response time; meanwhile, their monomers pose significant risks to human health and the environment. In this work, we report a nontoxic polyaniline (PANI)-based derivative, poly(N-phenylglycine) (PNPG). By introducing carboxyl groups onto the nitrogen atoms of the polymer backbone, the conjugated and electronic structure of the polymer was modified, thus reducing the bandgap of PNPG and facilitating charge transportation. Therefore, PNPG demonstrates a remarkable optical modulation amplitude (85% at 778 nm) and a broad color gamut (CIE chromaticity coordinate ranges: x, 0.26-0.4; y, 0.29-0.47). Furthermore, PNPG is successfully integrated into both rigid and flexible electrochromic devices. This work offers a solution for the development of high-performance, nontoxic conductive polymers, highlighting the potential for advanced applications in smart electronics.


  • Open Access

    In Situ Polymerized Polyfluorinated Crosslinked Polyether Electrolytes for High‐Voltage Lithium Metal Batteries

    by Shimei Li, Hu Hong, Xinru Yang, Dedi Li, Qi Xiong, Dechao Zhang, Shixun Wang, Zhaodong Huang, Haiming Lv, Chunyi Zhi

    In situ polymerized polyether electrolytes are promising for solid‐state Li metal batteries due to their high ionic conductivity and excellent interfacial contact. However, their practical application is hindered by Li dendrite formation, interfacial degradation, and limited oxidative stability. Herein, we propose an in situ polymerized polyfluorinated crosslinked polyether electrolyte (PDOL‐OFHDBO), synthesized by copolymerizing 1,3‐dioxolane (DOL) with 2,2′‐(2,2,3,3,4,4,5,5‐octafluorohexane‐1,6‐diyl)bis(oxirane) (OFHDBO) as a polyfluorinated crosslinker. The electron‐withdrawing polyfluorinated groups endow PDOL‐OFHDBO with enhanced oxidative stability and interfacial compatibility, while reducing the solvation power of the polymer matrix to promote an anion‐derived inorganic‐rich solid electrolyte interphase for uniform Li deposition. Consequently, PDOL‐OFHDBO exhibits a wide electrochemical stability window (>5.6 V) and enables long‐term stable Li plating/stripping for over 1100 h. Furthermore, Li||LiNi0.8Co0.1Mn0.1O2 (NCM811) full cells utilizing PDOL‐OFHDBO demonstrate outstanding cycling stability with high‐loading cathodes (≈3.8 mAh cm−2) and thin Li anodes (50 µm), achieving capacity retention of 95.5% and 89.1% over 100 cycles at cut‐off voltages of 4.3 and 4.5 V, respectively. Remarkably, Ah‐level Li||NCM811 pouch cells deliver an impressive specific energy of 401.8 Wh kg−1, highlighting their potential for practical solid‐state Li metal batteries.


  • A solid solution alloy current collector to stabilize zinc metal anodes

    by Wei Liang, Yuwei Zhao, Kangning Shi, Ying Fu, Haiming Lv (Lyu)

    A solid solution alloy current collector strategy has been developed to stabilize zinc metal anodes.


  • Open Access

    A Multifunctional Binder for Current‐Collector‐Free Zn Powder Anodes

    by Yanbo Wang, Xintao Ma, Xinru Yang, Rong Zhang, Hu Hong, Shixun Wang, Qing Li, Ze Chen, Zhaodong Huang, Haiming Lv, et al.

    Compared with commonly used Zn foil anodes, Zn powder (ZP) anodes offer superior versatility and processability. However, in aqueous electrolytes, dendrite growth and side reactions, such as corrosion and hydrogen evolution, become more severe in ZP anodes than those in Zn foil anodes because of the rough surfaces and high surface areas of ZP, leading to poor reversibility and limitations in high‐loading mass cathodes. In this study, a diisocyanate‐polytetrahydrofuran‐dihydrazide polymer (DDP) binder is developed, inspired by protein structures. The strong Zn 2+ adsorption capability of the binder effectively regulates Zn 2+ flux, while its unique hydrogen‐bond arrays facilitate the formation of a free‐standing ZP anode and inhibit side reactions. The binder exhibits superior mechanical performance, providing ZP electrodes with excellent resistance to various mechanical stresses, including tensile, nanoindentation, scratch, and dynamic bending tests. ZP symmetric cells achieve stable cycling at capacities of 2 and 5 mAh cm −2 . In addition, DDP functions as an iodine cathode, effectively mitigating the polyiodide shuttle effect. The fabricated ZP/DDP||I 2 /DDP full cells demonstrate an excellent rate capability and cycling stability, even under a high‐loading conditions. This study presents a novel approach for preparing stable ZP anodes and iodine cathodes, offering a promising strategy for large‐scale applications.


  • Salt dissociation and localized high-concentration solvation at the interface of a fluorinated gel and polymer solid electrolyte

    by Dechao Zhang, Yuxuan Liu, Dedi Li, Shimei Li, Qi Xiong, Zhaodong Huang, Shixun Wang, Hu Hong, Jiaxiong Zhu, Haiming Lv, et al.

    Low salt dissociation and the unstable [Li(N,N-dimethylformamide (DMF))x]+ solvent structure in poly(vinylidene fluoride) (PVDF)-based solid polymer electrolyte (SPE) remarkably restricts the high throughput ion transport and interfacial stability. Here, we designed a hybrid electrolyte (denoted as HFGP-SE) composed of fluorinated gel solid electrolyte (FG-SE) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVHF)-based solid polymer electrolyte (PVHF-SPE). We found that in the HFGP-SE, the interface of FG-SE and PVHF-SPE effectively promotes lithium salt dissociation and creates a localized high-concentration (LHC) solvation structure. The developed HFGP-SE shows high ionic conductivity (0.84 mS cm−1) and a remarkably improved lithium transference number (tLi+ = 0.87). Meanwhile, the controlled LHC solvation structure formed at the interface between FG-SE and PVHF-SPE supports the formation of inorganic-rich solid electrolyte interphases (SEIs) derived from anions, allowing for stable lithium deposition and ultra-stable plating/stripping performance for over 1200 hours at a current density of 0.5 mA cm−2. Additionally, HFGP-SE supported stable cycling in 4.5 V class Li||NCM811 full cells under practical conditions, with a 50 μm thick lithium metal anode and cathodes with a mass loading of 12 mg cm−2, achieving an areal capacity >2 mA h cm−2. This work proposes a novel strategy using interfaces existing in hybrid solid electrolytes to significantly enhance lithium salt dissociation, fast ion transport, and interfacial stability of solid-state electrolytes for lithium metal batteries.


  • Insight into Anionic Discrepancies in Bipolar Poly(Thionine) Organic Cathodes for Aqueous Zinc Ion Batteries

    by Shuai Zhan, Chunfang Wang, Leheng Zhong, Linwei Zhao, Xiaodong Yang, Amy X.Y. Guo, Wei Xiong, Liangjie Cheng, Ran Li, Zijie Tang, et al.

    Electroactive organic electrode materials exhibit remarkable potential in aqueous zinc ion batteries (AZIBs) due to their abundant availability, customizable structures, sustainability, and high reversibility. However, the research on AZIBs has predominantly concentrated on unraveling the storage mechanism of zinc cations, often neglecting the significance of anions in this regard. Herein, bipolar poly(thionine) is synthesized by a simple and efficient polymerization reaction, and the kinetics of different anions are investigated using poly(thionine) as the cathode of AZIBs. Notably, poly(thionine) is a bipolar organic polymer electrode material and exhibits enhanced stability in aqueous solutions compared to thionine monomers. Kinetic analysis reveals that ClO 4 − exhibits the fastest kinetics among SO 4 2− , Cl − , and OTF − , demonstrating excellent rate performance (109 mAh g −1 @ 0.5 A g −1 and 92 mAh g −1 @ 20 A g −1 ). Mechanism studies reveal that the poly(thionine) cathode facilitates the co‐storage of both anions and cations in Zn(ClO 4 ) 2 . Furthermore, the lower electrostatic potential of ClO 4 − influences the strength of hydrogen bonding with water molecules, thereby enhancing the overall kinetics in aqueous electrolytes. This work provides an effective strategy for synthesizing high‐quality organic materials and offers new insights into the kinetic behavior of anions in AZIBs.