RSRunkun Shi

Runkun Shi

*This is an algorithmically generated author record based on publicly available information.

Runkun Shi has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mitigating Deposit-induced Active Oxidation of Fe-28Cr Alloys at 900 ℃ via Carbon-tailored Phase Transformation

    by Lei An, Runkun Shi, Yingqi Liu, Xiaochang Xu

    In high-chromium alloys under high-temperature applications, the cyclic active oxidation induced by alkali metal chlorides represents a major threat, yet the quantitative effect of carbon content on interrupting this cycle remains unclear. In this study, corrosion experiments on Fe-28Cr-xC (x= 2.00, 1.70, 1.35, and 1.00 wt.%) alloys at 900 °C under KCl-NaCl deposits demonstrated that reducing carbon content significantly enhances corrosion resistance.The parabolic rate constants (kₚ) decreased from 723.6 (2.00C) and 342.3 (1.70C) to 56.3 (1.35C) and 31.4 mg²·cm⁻⁴·h⁻¹ (1.00C). In particular, the 83.6% reduction in kₚ between 1.70C and 1.35C was approximately twice that observed in the adjacent composition intervals, correlating well with the critical austenite-to-ferrite transition, the marked disruption of carbide network connectivity, and the establishment of a protective FeCr₂O₄ layer. Mechanistic analysis indicates that the low-carbon design not only suppresses carbide precipitation that induces Cr-depleted grain boundaries but also drives the matrix transformation from austenite to the faster-diffusing ferrite phase. This accelerates Cr outward diffusion, promotes rapid formation of a dense FeCr2O4 spinel protective layer, effectively blocks chlorine penetration, and terminates the active oxidation cycle. The study demonstrates that controlling the matrix phase via carbon content provides an effective metallurgical strategy to enhance the resistance of iron-based alloys to chloride-induced high-temperature corrosion.