Saeid Pourzeynali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Saeid Pourzeynali has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Ehsan Tafakori
University of Guilan
2 shared publications Homayoon E. Estekanchi
2 shared publicationsSeyed Ahmad Mobinipour
Dept. of Civil Eng., Faculty of Engineering, University of Guilan, Rasht, Iran
2 shared publications- Ali Khodakarimi
Structural Engineering, Department of Civil Engineering, University of Guilan, Rasht, Iran
1 shared publication Alireza Khadivyan
University of Guilan
1 shared publicationAmir Batouei
Department of Civil Engineering, Faculty of Engineering, University of Guilan, Rasht, Iran
1 shared publication
Latest Publications
- 19 May 2026
- Published by Elsevier in Structures
- Vol. 89
Nonlinear control of tall buildings vibrations excited by earthquake forces using gyroscopic dampers
- 19 May 2026
- Published by Elsevier in Structures
- Vol. 89
Nonlinear control of tall buildings vibrations excited by earthquake forces using gyroscopic dampers
- 2 April 2024
- Published by Elsevier in Journal of Constructional Steel Research
- Vol. 217
Seismic vibration control of steel buildings with irregular plan using linked column
- 2 April 2024
- Published by Elsevier in Journal of Constructional Steel Research
- Vol. 217
Seismic vibration control of steel buildings with irregular plan using linked column
- 5 December 2023
- Published by Elsevier in Structures
- Vol. 58
Optimal control of high-rise building structures against earthquake excitations using independent stories as TMD
- 5 December 2023
- Published by Elsevier in Structures
- Vol. 58
Optimal control of high-rise building structures against earthquake excitations using independent stories as TMD
- 18 August 2021
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 26 (14) , 7469-7485
Attenuation Relationships for Horizontal and Vertical Peak and Spectral Accelerations for Alborz Zone of Iran
In the present study, the attenuation relationships of horizontal and vertical peak ground acceleration and 5%-damped spectral acceleration, suitable for the northern region of Iran (Alborz Zone), are presented. The dataset contains 308 three-component records from 104 events with moment magnitudes between 4.5 and 7.6 and hypocentral distances from 10 to 200 km. Site conditions of the stations have been classified into two categories, rock and soil. To determine the unknown constants of the relations, one-step nonlinear regression analysis was used. Finally, it was found that the proposed attenuation relationships show good compatibility with a number of past well-known studies.
- 18 August 2021
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 26 (14) , 7469-7485
Attenuation Relationships for Horizontal and Vertical Peak and Spectral Accelerations for Alborz Zone of Iran
In the present study, the attenuation relationships of horizontal and vertical peak ground acceleration and 5%-damped spectral acceleration, suitable for the northern region of Iran (Alborz Zone), are presented. The dataset contains 308 three-component records from 104 events with moment magnitudes between 4.5 and 7.6 and hypocentral distances from 10 to 200 km. Site conditions of the stations have been classified into two categories, rock and soil. To determine the unknown constants of the relations, one-step nonlinear regression analysis was used. Finally, it was found that the proposed attenuation relationships show good compatibility with a number of past well-known studies.
- Open Access
- 1 June 2020
- Vol. 53 (1) , 71-88
Assessment of Near-Fault Ground Motion Effects on the Fragility Curves of Tall Steel Moment Resisting Frames
- 1 June 2020
- Vol. 53 (1) , 71-88
Open AccessAssessment of Near-Fault Ground Motion Effects on the Fragility Curves of Tall Steel Moment Resisting Frames
- Open Access
- 15 February 2019
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 21 (1) , 170-186
Efficiency of near-fault ground motion pulses to evaluate seismic performance of the SMRF Systems
Earthquake accelerograms recorded in the near-fault regions have special characteristics including the long-period pulse in velocity records as well as high frequency content in acceleration records. In the present study, by using a wavelet analysis, the long period pulses exist in the velocity records of 28 near-fault ground motions, selected from the PEER NGA database, were first separated from the original records. Subsequently, an incremental non-linear dynamic analysis (IDA) was conducted to evaluate the non-elastic response of an example frame subjected to these original records and their extracted pulses to examine the efficiency of the extracted pulse of the records instead of the original accelerograms in dynamic analysis. The results of this study revealed that the efficiency of the extracted pulses to estimate the structure capacity depends on the structural performance levels. From the numerical analysis performed in the present study, it is found that if a given structure is designed for immediate occupancy (IO) performance level (low drift), the application of the extracted pulses overestimates the structure capacity, which is in the unsafe side. Nevertheless, if the structure is designed for collapse prevention (CP) performance level and experiences high level of non-elastic displacements, the extracted pulses provide a conservative estimation of the collapse capacity, which is in the safe side.
- 15 February 2019
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 21 (1) , 170-186
Open AccessEfficiency of near-fault ground motion pulses to evaluate seismic performance of the SMRF Systems
Earthquake accelerograms recorded in the near-fault regions have special characteristics including the long-period pulse in velocity records as well as high frequency content in acceleration records. In the present study, by using a wavelet analysis, the long period pulses exist in the velocity records of 28 near-fault ground motions, selected from the PEER NGA database, were first separated from the original records. Subsequently, an incremental non-linear dynamic analysis (IDA) was conducted to evaluate the non-elastic response of an example frame subjected to these original records and their extracted pulses to examine the efficiency of the extracted pulse of the records instead of the original accelerograms in dynamic analysis. The results of this study revealed that the efficiency of the extracted pulses to estimate the structure capacity depends on the structural performance levels. From the numerical analysis performed in the present study, it is found that if a given structure is designed for immediate occupancy (IO) performance level (low drift), the application of the extracted pulses overestimates the structure capacity, which is in the unsafe side. Nevertheless, if the structure is designed for collapse prevention (CP) performance level and experiences high level of non-elastic displacements, the extracted pulses provide a conservative estimation of the collapse capacity, which is in the safe side.
- Open Access
- 13 August 2017
- Published by SCI AND TECH UNIVERSAL INC in Scientia Iranica
- Vol. 24 (5) , 2213-2226
Assessment of Collapse Modes in Reinforced Concrete Frames Considering Record-to-Record and Modeling Uncertainties
Dominant collapse mechanisms (DCMs) have been reported to play an important role in collapse capacity of structural systems and the seismic losses consequent to it. Therefore, DCMs of Reinforced Concrete (RC) frames have been studied, in this article, considering Record-to-Record (RTR) and modeling uncertainties. Two sets of RC frames have been designed, in this regard, that share the design assumptions but contain different levels of over-strength. Each set contains 26, 4- to 20-story nonlinearly modeled frames. Initially, Incremental Dynamic Analysis (IDA) was used to identify frames’ DCMs. The RTR variability reflected through IDA was next combined with spectral shape and pulse effects of the ground motion records. Modeling uncertainties were introduced finally to the study using a response surface based Monte Carlo method. The study results reveal that the degree to which DCMs are affected by the associated uncertainties is a function of the over-strength provided to the frames. This affection is found to be generally important and particularly remarkable for especially detailed ductile structures.
- 13 August 2017
- Published by SCI AND TECH UNIVERSAL INC in Scientia Iranica
- Vol. 24 (5) , 2213-2226
Open AccessAssessment of Collapse Modes in Reinforced Concrete Frames Considering Record-to-Record and Modeling Uncertainties
Dominant collapse mechanisms (DCMs) have been reported to play an important role in collapse capacity of structural systems and the seismic losses consequent to it. Therefore, DCMs of Reinforced Concrete (RC) frames have been studied, in this article, considering Record-to-Record (RTR) and modeling uncertainties. Two sets of RC frames have been designed, in this regard, that share the design assumptions but contain different levels of over-strength. Each set contains 26, 4- to 20-story nonlinearly modeled frames. Initially, Incremental Dynamic Analysis (IDA) was used to identify frames’ DCMs. The RTR variability reflected through IDA was next combined with spectral shape and pulse effects of the ground motion records. Modeling uncertainties were introduced finally to the study using a response surface based Monte Carlo method. The study results reveal that the degree to which DCMs are affected by the associated uncertainties is a function of the over-strength provided to the frames. This affection is found to be generally important and particularly remarkable for especially detailed ductile structures.
- 26 January 2017
- Published by Springer Nature in Earthquake Engineering and Engineering Vibration
- Vol. 16 (1) , 233-245
Probabilistic seismic loss estimation via endurance time method
- 26 January 2017
- Published by Springer Nature in Earthquake Engineering and Engineering Vibration
- Vol. 16 (1) , 233-245
Probabilistic seismic loss estimation via endurance time method