Yanjing He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yanjing He has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
Hao Yuan
State Key Discipline Laboratory of Wide Bandgap Semiconductor Technology, Faculty of Integrated Circuit, Xidian University, Xian, China
5 shared publicationsXiaowu Gong
State Key Discipline Laboratory of Wide Bandgap Semiconductor Technology, Faculty of Integrated Circuit, Xidian University, Xian, China
5 shared publications- Yuming Zhang
Xidian University
5 shared publications - Qingwen Song
Xidian University
4 shared publications - Xiaoyan Tang
Xidian University
4 shared publications - Xinbin Zhan
State Key Discipline Laboratory of Wide Bandgap Semiconductor Technology, Faculty of Integrated Circuit, Xidian University, Xian, China
4 shared publications
Latest Publications
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (4) , 2422-2429
Thermoelectric Cooler-Driven Active Thermal Management for Enhanced Performance and Reliability of GaN Schottky Barrier Diode
Gallium nitride (GaN) devices face a severe self-heating bottleneck under high-power operation due to limited thermal conductivity, causing performance degradation and reliability risk. This work demonstrates the first integration of a thermoelectric cooler (TEC) with a lateral GaN Schottky barrier diode (SBD), achieving breakthrough enhancements in thermal management, electrical performance, and operational reliability. It is found that the TEC module can reduce junction-to-ambient thermal resistance (R ${}_{\text {j-a}}\text {)}$ of the lateral GaN SBD by 80% to 5.3K/W, slashing peak temperature from $97.9~^{\circ }$ C to $33.5~^{\circ }$ C at 2.5-W power dissipation, enabling stable 8-W operation, and tripling conventional power limits. Electrically, TEC integration enables record-low on-resistance (R ${}_{\text {on}}\text {)}$ of $2.4~\Omega \cdot $ mm, marking a 38.5% improvement, 21.7% higher forward current (I ${}_{\text {on}}\text {)}$ reaching 898.3mA at 5 V, and order-of-magnitude leakage suppression. Mechanistic analysis confirms TEC extends the thermionic-emission-dominant leakage regime while suppressing trap-mediated leakage pathways at elevated reverse biases. Crucially, under 4000-s forward voltage bias, the current degradation of TEC-cooled GaN SBD reduces by 80% to merely 1.8% compared to 9.1% for natural convection. High-voltage off-state stress at −200 V further verifies 50% lower $\Delta $ Ron degradation in TEC-cooled GaN SBD. These breakthroughs establish TEC cooling as a critical enabler for ultrahigh-power GaN electronics operating beyond intrinsic thermal limits.
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (4) , 2422-2429
Thermoelectric Cooler-Driven Active Thermal Management for Enhanced Performance and Reliability of GaN Schottky Barrier Diode
Gallium nitride (GaN) devices face a severe self-heating bottleneck under high-power operation due to limited thermal conductivity, causing performance degradation and reliability risk. This work demonstrates the first integration of a thermoelectric cooler (TEC) with a lateral GaN Schottky barrier diode (SBD), achieving breakthrough enhancements in thermal management, electrical performance, and operational reliability. It is found that the TEC module can reduce junction-to-ambient thermal resistance (R ${}_{\text {j-a}}\text {)}$ of the lateral GaN SBD by 80% to 5.3K/W, slashing peak temperature from $97.9~^{\circ }$ C to $33.5~^{\circ }$ C at 2.5-W power dissipation, enabling stable 8-W operation, and tripling conventional power limits. Electrically, TEC integration enables record-low on-resistance (R ${}_{\text {on}}\text {)}$ of $2.4~\Omega \cdot $ mm, marking a 38.5% improvement, 21.7% higher forward current (I ${}_{\text {on}}\text {)}$ reaching 898.3mA at 5 V, and order-of-magnitude leakage suppression. Mechanistic analysis confirms TEC extends the thermionic-emission-dominant leakage regime while suppressing trap-mediated leakage pathways at elevated reverse biases. Crucially, under 4000-s forward voltage bias, the current degradation of TEC-cooled GaN SBD reduces by 80% to merely 1.8% compared to 9.1% for natural convection. High-voltage off-state stress at −200 V further verifies 50% lower $\Delta $ Ron degradation in TEC-cooled GaN SBD. These breakthroughs establish TEC cooling as a critical enabler for ultrahigh-power GaN electronics operating beyond intrinsic thermal limits.
- Open Access
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 14, 85-92
Microchannel Cooling for Performance Enhancement of GaN-on-Si HEMT With a Low R j-a of 13.5 K/W
Gallium nitride (GaN) is a high-performance wide bandgap semiconductor material with unique physical and chemical properties such as higher breakdown electric field, higher electron density, superior electron mobility and saturation velocity. These properties endow GaN with unparalleled advantages in high-frequency and high-power applications. However, a primary challenge faced by the industrialized GaN HEMT is thermal management, particularly in handling higher power densities, which leads to a serious degradation in electrical performance and long-term reliability. In this study, electrothermal analysis for GaN HEMT is conducted based on two thermal resistance models for natural air cooling and microchannel cooling, proving a minimum 40% reduction in Rj-a using microchannel cooling and an optimal coolant flow rate to guide the actual experiment. Furthermore, the experimental result shows that microchannel cooling technology significantly enhances the thermal convection capacity, resulting in a 35.2% increase in the saturation current. Moreover, the Rj-a can be reduced to 13.5 K/W with 65% improvement at a cooling flow rate of 460 mL/min, and the surface heat flux density reaches 2200 W/cm2, which is 106% higher than that of natural air cooling.
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 14, 85-92
Open AccessMicrochannel Cooling for Performance Enhancement of GaN-on-Si HEMT With a Low R j-a of 13.5 K/W
Gallium nitride (GaN) is a high-performance wide bandgap semiconductor material with unique physical and chemical properties such as higher breakdown electric field, higher electron density, superior electron mobility and saturation velocity. These properties endow GaN with unparalleled advantages in high-frequency and high-power applications. However, a primary challenge faced by the industrialized GaN HEMT is thermal management, particularly in handling higher power densities, which leads to a serious degradation in electrical performance and long-term reliability. In this study, electrothermal analysis for GaN HEMT is conducted based on two thermal resistance models for natural air cooling and microchannel cooling, proving a minimum 40% reduction in Rj-a using microchannel cooling and an optimal coolant flow rate to guide the actual experiment. Furthermore, the experimental result shows that microchannel cooling technology significantly enhances the thermal convection capacity, resulting in a 35.2% increase in the saturation current. Moreover, the Rj-a can be reduced to 13.5 K/W with 65% improvement at a cooling flow rate of 460 mL/min, and the surface heat flux density reaches 2200 W/cm2, which is 106% higher than that of natural air cooling.
- 3 November 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 55 (1) , 1143-1152
Investigation on Improving Short-Circuit Characteristic of 1200-V Planar-Gate SiC MOSFETs Using Enhanced N-Buffer Design
- 3 November 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 55 (1) , 1143-1152
Investigation on Improving Short-Circuit Characteristic of 1200-V Planar-Gate SiC MOSFETs Using Enhanced N-Buffer Design
- 29 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (2) , 2049-2057
Degradation Evaluation for Ion Implantation Doping in 1.2-kV SiC MOSFET Body Diode Under Third-Quadrant Conduction
This work systematically investigates how different P-well ion implantation designs affect the third-quadrant conduction characteristics and the surge reliability of 1.2kV SiC MOSFETs. Four P-well structures (P-well A to P-well D) are designed by adjusting peak concentration and implantation depth in order to construct P-well resistance and source-drain current transport. The experimental results demonstrate a decline in surge capability with an increase in P-well resistance. The highest degradation rate reached is 7.8% in P-well A, while P-well D exhibited the least change, at 4.7%. When VGS = 0V, the parallel conduction path formed by the channel and the body diode reduces differences in source-drain voltage drop caused by P-well design. Turning off the channel further reduces the surge capability. Repetitive surge current tests reveal that the accumulation of trapped holes and thermo-mechanical fatigue in the package are the main causes of device degradation. Furthermore, deep energy level defects induced by high-energy ion implantation form localized barriers by trapping carriers, thereby triggering bipolar degradation and reducing surge reliability.
- 29 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (2) , 2049-2057
Degradation Evaluation for Ion Implantation Doping in 1.2-kV SiC MOSFET Body Diode Under Third-Quadrant Conduction
This work systematically investigates how different P-well ion implantation designs affect the third-quadrant conduction characteristics and the surge reliability of 1.2kV SiC MOSFETs. Four P-well structures (P-well A to P-well D) are designed by adjusting peak concentration and implantation depth in order to construct P-well resistance and source-drain current transport. The experimental results demonstrate a decline in surge capability with an increase in P-well resistance. The highest degradation rate reached is 7.8% in P-well A, while P-well D exhibited the least change, at 4.7%. When VGS = 0V, the parallel conduction path formed by the channel and the body diode reduces differences in source-drain voltage drop caused by P-well design. Turning off the channel further reduces the surge capability. Repetitive surge current tests reveal that the accumulation of trapped holes and thermo-mechanical fatigue in the package are the main causes of device degradation. Furthermore, deep energy level defects induced by high-energy ion implantation form localized barriers by trapping carriers, thereby triggering bipolar degradation and reducing surge reliability.
- 12 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (10) , 5342-5350
Design and Verification of SiC Amplifiers for Extreme Temperature Applications Based on ANN Modeling of 4H-SiC MOSFETs
This study presents a high-precision artificial neural network (ANN)-based modeling framework for SiC MOSFETs, achieving high accuracy with less than 1.2% error over a wide temperature range (27 °C–500 °C). The developed model enables reliable SPICE simulations of SiC integrated circuits, facilitating the design and experimental verification of high-temperature analog circuits. A single-stage common-source (CS) amplifier with a pMOS current source load demonstrates a maximum low-frequency gain of 25.5 dB, while a two-stage amplifier achieves 52.5-dB gain with a 220-kHz unity-gain bandwidth (UGBW) at 500 °C. Experimental results confirm the agreement between simulation and measurement, with deviations of less than 6.9% in the 1-MHz frequency domain for key performance indicators at both room temperature and 500 °C operating conditions. This study establishes a robust and scalable methodology for the design and verification of SiC-based circuits over a wide temperature range, with potential applications to other emerging semiconductor technologies operating in extreme environments.
- 12 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (10) , 5342-5350
Design and Verification of SiC Amplifiers for Extreme Temperature Applications Based on ANN Modeling of 4H-SiC MOSFETs
This study presents a high-precision artificial neural network (ANN)-based modeling framework for SiC MOSFETs, achieving high accuracy with less than 1.2% error over a wide temperature range (27 °C–500 °C). The developed model enables reliable SPICE simulations of SiC integrated circuits, facilitating the design and experimental verification of high-temperature analog circuits. A single-stage common-source (CS) amplifier with a pMOS current source load demonstrates a maximum low-frequency gain of 25.5 dB, while a two-stage amplifier achieves 52.5-dB gain with a 220-kHz unity-gain bandwidth (UGBW) at 500 °C. Experimental results confirm the agreement between simulation and measurement, with deviations of less than 6.9% in the 1-MHz frequency domain for key performance indicators at both room temperature and 500 °C operating conditions. This study establishes a robust and scalable methodology for the design and verification of SiC-based circuits over a wide temperature range, with potential applications to other emerging semiconductor technologies operating in extreme environments.
- Open Access
- 3 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 6, 1028-1035
Investigation of SiC MOSFET Structures for Surge Robustness in the Third Quadrant Under Various $V_{\text{GS}}$ BiasesIn this work, SiC planar-gate MOSFET (PG-MOS), SiC short-channel (0.3μm) MOSFET (SCMOS), and SiC JBSFET are tested for the third quadrant I-V temperature characteristics and surge current capability at different gate-source bias voltage. The I-V temperature curves and the TCAD simulation reveal that different device structures exhibit distinct temperature variation trends due to different current conduction paths. The surge test results indicate that SiC PGMOS and SiC SCMOS exhibit bipolar conduction modes at VGS = 0V and VGS = -10V. SiC JBSFET operates in a unipolar conduction mode prior to the surge current density threshold of 998.3 A/cm2, after which it transitions to a post-bipolar conduction mode, similar to SiC JBS diode. Finally, the failure mechanism is analyzed. The surge current crowding in the edge termination region is a key factor affecting the surge capability of SiC PGMOS. Reducing channel length leads to premature breakdown of the gate-source dielectric layer in SiC SCMOS at VGS = 0V but enhances the surge ability at VGS = -10V. The thermal stress induced by the surge current in SiC JBSFET causes large-scale damage to the source metal and cells, resulting in a short circuit between the gate, source, and drain
- 3 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 6, 1028-1035
Open AccessInvestigation of SiC MOSFET Structures for Surge Robustness in the Third Quadrant Under Various $V_{\text{GS}}$ BiasesIn this work, SiC planar-gate MOSFET (PG-MOS), SiC short-channel (0.3μm) MOSFET (SCMOS), and SiC JBSFET are tested for the third quadrant I-V temperature characteristics and surge current capability at different gate-source bias voltage. The I-V temperature curves and the TCAD simulation reveal that different device structures exhibit distinct temperature variation trends due to different current conduction paths. The surge test results indicate that SiC PGMOS and SiC SCMOS exhibit bipolar conduction modes at VGS = 0V and VGS = -10V. SiC JBSFET operates in a unipolar conduction mode prior to the surge current density threshold of 998.3 A/cm2, after which it transitions to a post-bipolar conduction mode, similar to SiC JBS diode. Finally, the failure mechanism is analyzed. The surge current crowding in the edge termination region is a key factor affecting the surge capability of SiC PGMOS. Reducing channel length leads to premature breakdown of the gate-source dielectric layer in SiC SCMOS at VGS = 0V but enhances the surge ability at VGS = -10V. The thermal stress induced by the surge current in SiC JBSFET causes large-scale damage to the source metal and cells, resulting in a short circuit between the gate, source, and drain
- Open Access
- 5 June 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (6) , 759
A Novel IGBT with SIPOS Pillars Achieving Ultralow Power Loss in TCAD Simulation Study
A novel insulated gate bipolar transistor with Semi-Insulated POly Silicon (SIPOS) is presented in this paper and analyzed through TCAD simulation. In the off state, the SIPOS-IGBT can obtain a uniform electric field distribution, which enables a thinner drift region under the same breakdown voltage. In the on state, an electron accumulation layer is formed along the SIPOS, which can increase the injection level of the “PiN region” in the device, and the carrier concentration in the drift region is also increased due to the charge balance effect. Moreover, the SIPOS-IGBT can achieve a quick and thorough depletion in the drift region during the turn-off transient, which can greatly reduce the turn-off loss of the SIPOS-IGBT. These advantages improve the tradeoff between the conduction and switching losses. According to the simulation results, the SIPOS-IGBT obtained a 58% lower turn loss than that of a field-stop (FS) IGBT and 30% lower than an HK-IGBT with the same on-state voltage.
- 5 June 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (6) , 759
Open AccessA Novel IGBT with SIPOS Pillars Achieving Ultralow Power Loss in TCAD Simulation Study
A novel insulated gate bipolar transistor with Semi-Insulated POly Silicon (SIPOS) is presented in this paper and analyzed through TCAD simulation. In the off state, the SIPOS-IGBT can obtain a uniform electric field distribution, which enables a thinner drift region under the same breakdown voltage. In the on state, an electron accumulation layer is formed along the SIPOS, which can increase the injection level of the “PiN region” in the device, and the carrier concentration in the drift region is also increased due to the charge balance effect. Moreover, the SIPOS-IGBT can achieve a quick and thorough depletion in the drift region during the turn-off transient, which can greatly reduce the turn-off loss of the SIPOS-IGBT. These advantages improve the tradeoff between the conduction and switching losses. According to the simulation results, the SIPOS-IGBT obtained a 58% lower turn loss than that of a field-stop (FS) IGBT and 30% lower than an HK-IGBT with the same on-state voltage.
- 15 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (1) , 709-714
Investigation on Degradation of 1200-V Planar and Trench SiC MOSFET Under Surge Current Stress of Body Diode
When silicon carbide (SiC) metal–oxide–semiconductor field-effect transistors (MOSFETs) operate in the third quadrant, the surge current under extreme operating conditions hinders the body diode from replacing the external SiC Schottky barrier diode (SBD) as the freewheeling diode. Primarily, the channel activation of SiC MOSFET at $\textit{V}_\textbf{GS}$ $=$ 0 V is attributed to the body effect and the current conduction pathway within the p-well. Following this, an in-depth surge reliability analysis is conducted, contingent upon the varying structures of SiC MOSFET. The experimental result indicates that the surge capability of double-trench SiC MOSFET is inferior compared with planar SiC MOSFET and asymmetric SiC MOSFET. The impurity defects by the deep groove process and the design of the terminal layout are the critical constraints to the reliability of D-MOSFET under surge current stress. The interplay of static parameter degradation and scanning electron microscopy (SEM) investigations pinpoints two primary factors accountable for device failure. On the one hand, the gate and source terminals are short circuited due to the melting of metal electrodes caused by substantial surge currents. On the other hand, severe thermomechanical strains, incited by elevated thermal stresses attributable to surge currents, provoke substrate fissuring, and culminating in comprehensive short circuits bridging the gate, source, and drain terminals.
- 15 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (1) , 709-714
Investigation on Degradation of 1200-V Planar and Trench SiC MOSFET Under Surge Current Stress of Body Diode
When silicon carbide (SiC) metal–oxide–semiconductor field-effect transistors (MOSFETs) operate in the third quadrant, the surge current under extreme operating conditions hinders the body diode from replacing the external SiC Schottky barrier diode (SBD) as the freewheeling diode. Primarily, the channel activation of SiC MOSFET at $\textit{V}_\textbf{GS}$ $=$ 0 V is attributed to the body effect and the current conduction pathway within the p-well. Following this, an in-depth surge reliability analysis is conducted, contingent upon the varying structures of SiC MOSFET. The experimental result indicates that the surge capability of double-trench SiC MOSFET is inferior compared with planar SiC MOSFET and asymmetric SiC MOSFET. The impurity defects by the deep groove process and the design of the terminal layout are the critical constraints to the reliability of D-MOSFET under surge current stress. The interplay of static parameter degradation and scanning electron microscopy (SEM) investigations pinpoints two primary factors accountable for device failure. On the one hand, the gate and source terminals are short circuited due to the melting of metal electrodes caused by substantial surge currents. On the other hand, severe thermomechanical strains, incited by elevated thermal stresses attributable to surge currents, provoke substrate fissuring, and culminating in comprehensive short circuits bridging the gate, source, and drain terminals.