Andreas Walter Bett
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Andreas Walter Bett has a total of 486 co-authors. Here are the top co-authors by number of shared publications:
- Frank Dimroth
Fraunhofer Institute for Solar Energy Systems ISE, Freiburg, Germany
53 shared publications Gabriel Sala
Instituto de Energia Solar-Universidad Politécnica de Madrid, Av. Complutense 30, 28040 Madrid, Spain
45 shared publications- Sarah Kurtz
National Renewable Energy Laboratory, 1617 Cole Boulevard, Golden, CO 80401, USA
36 shared publications Robert D. McConnell
9 shared publications- Gerald Siefer
Fraunhofer Institute for Solar Energy Systems ISE, Freiburg, Germany
5 shared publications - Marc Steiner
Fraunhofer Institute for Solar Energy Systems ISE Freiburg Germany
4 shared publications
Latest Publications
- Open Access
- 10 November 2026
- Published by TIB Open Publishing in PV-Symposium Proceedings
- Vol. 3
Preface
For more than 40 years, the PV Symposium held in Bad Staffelstein has been the central meeting place for expertise and networking in applied research and development in solar technology. With the 2026 claim "Rethinking Energy Supply: PV, Grids, Storage, and Sector Coupling," it focuses on the latest technical developments, current regulatory and political trends, and advances in research and application. As one of the most important drivers of innovation and the further development of a sustainable energy supply, the PV Symposium shapes the future of the photovoltaic industry. Two terawatts of PV capacity have already been installed worldwide. To achieve complete defossilization of all energy sectors, we need between 70 and 100 terawatts of PV capacity. This vision must be translated quickly and efficiently into future markets. This results in new tasks and challenges: On the one hand, it involves improving technical components and developing integrated photovoltaic solutions for optimal land use, as well as quality assurance in production and operation. On the other hand, the grid-supportive use of solar power – including grid stability, optimized self-consumption, storage integration, and more precise yield forecasts – is becoming increasingly important. In the future, solar power can no longer be considered in isolation but must be holistically integrated into the energy system. This requires functioning sector coupling. Energy storage systems such as batteries of all sizes, heat pumps, and e-mobility must be considered together and integrated systemically. This holistic approach is the key to innovation and new solutions. The PV Symposium is dedicated precisely to these system solutions and system technology. This industry gathering offers the ideal platform to discuss current issues, exchange knowledge, and present the latest developments. By publishing these proceedings, we ensure that the valuable knowledge exchanged during the conference reaches a wider audience, contributing to the ongoing dialogue and collaboration necessary to tackle the challenges faced by the photovoltaics sector. This documentation not only highlights the key results from the conference but also serves as a reference point for future work and a foundation for further collaboration between research, industry and policymaking In this context, the proceedings volume plays a particularly important role. It not only documents the thematic breadth and scientific depth of the symposium, it contributes to the visibility and long-term impact of the presented work and enable informed knowledge exchange well beyond the event itself.
- 10 November 2026
- Published by TIB Open Publishing in PV-Symposium Proceedings
- Vol. 3
Open AccessPreface
For more than 40 years, the PV Symposium held in Bad Staffelstein has been the central meeting place for expertise and networking in applied research and development in solar technology. With the 2026 claim "Rethinking Energy Supply: PV, Grids, Storage, and Sector Coupling," it focuses on the latest technical developments, current regulatory and political trends, and advances in research and application. As one of the most important drivers of innovation and the further development of a sustainable energy supply, the PV Symposium shapes the future of the photovoltaic industry. Two terawatts of PV capacity have already been installed worldwide. To achieve complete defossilization of all energy sectors, we need between 70 and 100 terawatts of PV capacity. This vision must be translated quickly and efficiently into future markets. This results in new tasks and challenges: On the one hand, it involves improving technical components and developing integrated photovoltaic solutions for optimal land use, as well as quality assurance in production and operation. On the other hand, the grid-supportive use of solar power – including grid stability, optimized self-consumption, storage integration, and more precise yield forecasts – is becoming increasingly important. In the future, solar power can no longer be considered in isolation but must be holistically integrated into the energy system. This requires functioning sector coupling. Energy storage systems such as batteries of all sizes, heat pumps, and e-mobility must be considered together and integrated systemically. This holistic approach is the key to innovation and new solutions. The PV Symposium is dedicated precisely to these system solutions and system technology. This industry gathering offers the ideal platform to discuss current issues, exchange knowledge, and present the latest developments. By publishing these proceedings, we ensure that the valuable knowledge exchanged during the conference reaches a wider audience, contributing to the ongoing dialogue and collaboration necessary to tackle the challenges faced by the photovoltaics sector. This documentation not only highlights the key results from the conference but also serves as a reference point for future work and a foundation for further collaboration between research, industry and policymaking In this context, the proceedings volume plays a particularly important role. It not only documents the thematic breadth and scientific depth of the symposium, it contributes to the visibility and long-term impact of the presented work and enable informed knowledge exchange well beyond the event itself.
- Open Access
- 9 November 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (18)
Stacking fault formation mechanism and suppression during GaP nucleation on silicon
We investigate stacking fault formation during gallium phosphide (GaP) nucleation on silicon by metal organic vapor-phase epitaxy and identify the dominant parameters controlling defect generation. We demonstrate that stacking faults nucleate during flow-modulated epitaxy of the GaP seed layer, not at the Si/GaP interface or during subsequent cap layer growth. A mechanistic model linking island growth mode and surface kinetics to stacking fault formation is developed and supported by experimental data demonstrating control over stacking fault density. The TEGa molar flow rate and the break duration during pulsed deposition are identified as the dominant process parameters: An optimal TEGa flow slightly below one monolayer per pulse minimizes island aspect ratio and reduces stacking fault nucleation sites, while sufficient break duration enables adatom diffusion to energetically favorable lattice sites. Total break duration dominates over its distribution between precursor pulses, with preferential placement after the TEGa pulse. Applying these findings, we achieve single-plane stacking fault densities below 2 × 104 cm−2 and stacking fault pyramid densities below 1 × 104 cm−2, exceeding the quality of previously reported GaP nucleation layers by more than one order of magnitude. Our findings demonstrate that systematic control of both growth mode and surface kinetics, achieved through suitable growth parameters, enables reproducible fabrication of low-defect GaP nucleation layers on silicon, paving the way for high-quality device integration.
- 9 November 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (18)
Open AccessStacking fault formation mechanism and suppression during GaP nucleation on silicon
We investigate stacking fault formation during gallium phosphide (GaP) nucleation on silicon by metal organic vapor-phase epitaxy and identify the dominant parameters controlling defect generation. We demonstrate that stacking faults nucleate during flow-modulated epitaxy of the GaP seed layer, not at the Si/GaP interface or during subsequent cap layer growth. A mechanistic model linking island growth mode and surface kinetics to stacking fault formation is developed and supported by experimental data demonstrating control over stacking fault density. The TEGa molar flow rate and the break duration during pulsed deposition are identified as the dominant process parameters: An optimal TEGa flow slightly below one monolayer per pulse minimizes island aspect ratio and reduces stacking fault nucleation sites, while sufficient break duration enables adatom diffusion to energetically favorable lattice sites. Total break duration dominates over its distribution between precursor pulses, with preferential placement after the TEGa pulse. Applying these findings, we achieve single-plane stacking fault densities below 2 × 104 cm−2 and stacking fault pyramid densities below 1 × 104 cm−2, exceeding the quality of previously reported GaP nucleation layers by more than one order of magnitude. Our findings demonstrate that systematic control of both growth mode and surface kinetics, achieved through suitable growth parameters, enables reproducible fabrication of low-defect GaP nucleation layers on silicon, paving the way for high-quality device integration.
- Open Access
- 26 September 2026
- Published by Elsevier in SSRN Electronic Journal
Porous Silicon as a Compliant Substrate for Germanium Heteroepitaxy: Reorganization Behaviour and Elastic Properties
Germanium (Ge) is a critical raw material with an increasing global demand. Its consumption in wafer production can be reduced by depositing a thin Ge layer on a silicon (Si) wafer, providing an alternative to a bulk Ge wafer. Previous studies have shown that an interlayer of porous Si (porSi) can facilitate the partial accommodation of thermal and lattice mismatch between Ge and Si. In this work, this approach is realized for the first time under conditions of atmospheric pressure chemical vapor deposition (APCVD). It is found that the stress induced by the lattice mismatch activates diffusion, leading to transformations in the porSi morphology. Furthermore, X-ray diffraction reveals that the porSi layer becomes fully or partially amorphous under Ge deposition for annealing at low or moderate temperatures prior to epitaxy. The softness and compliance of the growth template strongly depend on the annealing conditions. The presented results indicate that lower annealing temperatures are beneficial in this regard. These findings are keystones for further optimization toward a process under APCVD conditions that is potentially scalable to industry.
- 26 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPorous Silicon as a Compliant Substrate for Germanium Heteroepitaxy: Reorganization Behaviour and Elastic Properties
Germanium (Ge) is a critical raw material with an increasing global demand. Its consumption in wafer production can be reduced by depositing a thin Ge layer on a silicon (Si) wafer, providing an alternative to a bulk Ge wafer. Previous studies have shown that an interlayer of porous Si (porSi) can facilitate the partial accommodation of thermal and lattice mismatch between Ge and Si. In this work, this approach is realized for the first time under conditions of atmospheric pressure chemical vapor deposition (APCVD). It is found that the stress induced by the lattice mismatch activates diffusion, leading to transformations in the porSi morphology. Furthermore, X-ray diffraction reveals that the porSi layer becomes fully or partially amorphous under Ge deposition for annealing at low or moderate temperatures prior to epitaxy. The softness and compliance of the growth template strongly depend on the annealing conditions. The presented results indicate that lower annealing temperatures are beneficial in this regard. These findings are keystones for further optimization toward a process under APCVD conditions that is potentially scalable to industry.
- Open Access
- 6 March 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
A simple and robust method to quantify exciton dissociation efficiency with high precision in non-fullerene organic solar cells
This study introduces a framework to determine exciton dissociation efficiency in non-fullerene organic solar cells with high precision by correlating exciton photoluminescence, current density, and absorptance across donor–acceptor ratios.
- 6 March 2026
- Published by Royal Society of Chemistry (RSC) in EES Solar
Open AccessA simple and robust method to quantify exciton dissociation efficiency with high precision in non-fullerene organic solar cells
This study introduces a framework to determine exciton dissociation efficiency in non-fullerene organic solar cells with high precision by correlating exciton photoluminescence, current density, and absorptance across donor–acceptor ratios.
- 23 December 2025
- Published by Springer Nature in Nature Energy
- Vol. 11 (1) , 38-46
Historical and future learning for the new era of multi-terawatt photovoltaics
- 23 December 2025
- Published by Springer Nature in Nature Energy
- Vol. 11 (1) , 38-46
Historical and future learning for the new era of multi-terawatt photovoltaics
- Open Access
- 19 November 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (2)
Exciton Dissociation Efficiency in Organic Solar Cells Quantified Via Thermally Induced Acceptor Aggregation and Photoluminescence Analysis
The performance of organic photovoltaics (OPVs) depends critically on the efficiency of exciton dissociation at donor–acceptor interfaces, which is strongly influenced by the morphology. This work presents a method for quantifying the exciton dissociation efficiency leveraging the effect of thermally induced acceptor aggregation. The latter leads to an increase in the volume of pure domains, thereby hindering dissociation and increasing the recombination of excitons. As a result, the photocurrent decreases, while the photoluminescence (PL) of the non‐dissociated excitons increases. By correlating changes in absorptance, generated current and PL intensity over aging time, the method delivers robust estimates of the exciton dissociation efficiency, yielding 92.8% for the photoactive material PV‐X plus and 95.9% for PM6:DTY6 in their unaged state. The method also captures the decline in dissociation efficiency with aging, demonstrating that acceptor aggregation can become a significant performance‐limiting factor. Optical simulations of the device stacks reproduce the initial exciton dissociation efficiencies within their respective uncertainties, suggesting that exciton dissociation limits the internal quantum efficiency. However, the associated error margins are considerably larger, which underscores the enhanced accuracy of the proposed method and its suitability for diagnosing morphology‐related losses in OPV performance.
- 19 November 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (2)
Open AccessExciton Dissociation Efficiency in Organic Solar Cells Quantified Via Thermally Induced Acceptor Aggregation and Photoluminescence Analysis
The performance of organic photovoltaics (OPVs) depends critically on the efficiency of exciton dissociation at donor–acceptor interfaces, which is strongly influenced by the morphology. This work presents a method for quantifying the exciton dissociation efficiency leveraging the effect of thermally induced acceptor aggregation. The latter leads to an increase in the volume of pure domains, thereby hindering dissociation and increasing the recombination of excitons. As a result, the photocurrent decreases, while the photoluminescence (PL) of the non‐dissociated excitons increases. By correlating changes in absorptance, generated current and PL intensity over aging time, the method delivers robust estimates of the exciton dissociation efficiency, yielding 92.8% for the photoactive material PV‐X plus and 95.9% for PM6:DTY6 in their unaged state. The method also captures the decline in dissociation efficiency with aging, demonstrating that acceptor aggregation can become a significant performance‐limiting factor. Optical simulations of the device stacks reproduce the initial exciton dissociation efficiencies within their respective uncertainties, suggesting that exciton dissociation limits the internal quantum efficiency. However, the associated error margins are considerably larger, which underscores the enhanced accuracy of the proposed method and its suitability for diagnosing morphology‐related losses in OPV performance.
- Open Access
Indium‐Free Recombination Layer for Perovskite‐Based Multijunction‐Solar‐Cells‐ with Improved Performance Using Sputtered Zinc Tin Oxide
Monolithic two‐terminal perovskite‐based multijunction solar cells are considered as the next generation technology in the photovoltaic market, thanks to their high power conversion efficiency at potentially low production costs. In these structures, an interlayer is required for subcell interconnection. Commonly used recombination layers are based on scarce and expensive materials such as gold or indium. Developing alternative candidates without compromising device performance is therefore crucial for the future of such multijunction technologies. Herein, low‐temperature sputtered zinc tin oxide (ZTO) is employed as an indium‐free recombination layer between two perovskite subcells. ZTO is deposited using scalable in‐line sputtering. Slight zinc doping of tin oxide is needed to enable the DC sputtering from a rotary target. Employing ZTO results in improved device performance compared to the reference devices with indium tin oxide recombination layer, deposited via a lab‐type sputtering tool. Perovskite/perovskite/silicon triple‐junction and all‐perovskite tandem solar cells show increased open‐circuit voltages by ≈60 and ≈30 mV, respectively. The work showcases that ZTO can be sputtered in a non‐destructive and scalable manner in different perovskite‐based multi‐junction technologies.
Open AccessIndium‐Free Recombination Layer for Perovskite‐Based Multijunction‐Solar‐Cells‐ with Improved Performance Using Sputtered Zinc Tin Oxide
Monolithic two‐terminal perovskite‐based multijunction solar cells are considered as the next generation technology in the photovoltaic market, thanks to their high power conversion efficiency at potentially low production costs. In these structures, an interlayer is required for subcell interconnection. Commonly used recombination layers are based on scarce and expensive materials such as gold or indium. Developing alternative candidates without compromising device performance is therefore crucial for the future of such multijunction technologies. Herein, low‐temperature sputtered zinc tin oxide (ZTO) is employed as an indium‐free recombination layer between two perovskite subcells. ZTO is deposited using scalable in‐line sputtering. Slight zinc doping of tin oxide is needed to enable the DC sputtering from a rotary target. Employing ZTO results in improved device performance compared to the reference devices with indium tin oxide recombination layer, deposited via a lab‐type sputtering tool. Perovskite/perovskite/silicon triple‐junction and all‐perovskite tandem solar cells show increased open‐circuit voltages by ≈60 and ≈30 mV, respectively. The work showcases that ZTO can be sputtered in a non‐destructive and scalable manner in different perovskite‐based multi‐junction technologies.
- Open Access
- 19 June 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (31)
Implied Voltage and Current Characterization in Organic Solar Cells using Transient Photoluminescence
Measuring photoluminescence (PL) of free charge carriers under operation conditions is a valuable tool for characterizing solar cells. However, in organic solar cells, free charge carrier PL is typically obscured by the emission from non‐dissociated excitons. To overcome this, an adaptation of the time‐resolved PL measurement method is introduced that allows for the separate observation of the effects of applied voltage on the PL of excitons and free charge carriers. Using state‐of‐the‐art D18:Y6 and PM6:Y6 organic solar cells (power conversion efficiencies: and ), this study demonstrated: I) the determination of the implied voltage from free charge carrier PL under operation conditions providing insights into transport losses under steady‐state and transient conditions, II) the construction of a PL‐based current‐implied voltage curve revealing implied efficiencies of and ; III) an estimation of the photogenerated current at the maximum power point by combining PL and electroluminescence measurements, showing a reduction compared to the short‐circuit current, and IV) a discussion of possible origins of this reduction, including recombination due to limited transport, electrode‐induced charges and field‐dependent exciton dissociation. The introduced method thus provides a valuable diagnostic tool for identifying both transport and current losses in high‐efficiency organic solar cells.
- 19 June 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (31)
Open AccessImplied Voltage and Current Characterization in Organic Solar Cells using Transient Photoluminescence
Measuring photoluminescence (PL) of free charge carriers under operation conditions is a valuable tool for characterizing solar cells. However, in organic solar cells, free charge carrier PL is typically obscured by the emission from non‐dissociated excitons. To overcome this, an adaptation of the time‐resolved PL measurement method is introduced that allows for the separate observation of the effects of applied voltage on the PL of excitons and free charge carriers. Using state‐of‐the‐art D18:Y6 and PM6:Y6 organic solar cells (power conversion efficiencies: and ), this study demonstrated: I) the determination of the implied voltage from free charge carrier PL under operation conditions providing insights into transport losses under steady‐state and transient conditions, II) the construction of a PL‐based current‐implied voltage curve revealing implied efficiencies of and ; III) an estimation of the photogenerated current at the maximum power point by combining PL and electroluminescence measurements, showing a reduction compared to the short‐circuit current, and IV) a discussion of possible origins of this reduction, including recombination due to limited transport, electrode‐induced charges and field‐dependent exciton dissociation. The introduced method thus provides a valuable diagnostic tool for identifying both transport and current losses in high‐efficiency organic solar cells.
- Open Access
- 8 October 2024
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 278
Quantifying native and cut edge recombination of silicon solar cells
- 8 October 2024
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 278
Open AccessQuantifying native and cut edge recombination of silicon solar cells
- 28 April 2021
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 8 (2) , 020401
Preface to Special Collection: “Renewable Energy Technologies and Systems”
- 28 April 2021
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 8 (2) , 020401
Preface to Special Collection: “Renewable Energy Technologies and Systems”