Jannis Weinacker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jannis Weinacker has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Martin Wegener
Institute of Applied Physics (APH) Karlsruhe Institute of Technology (KIT) Wolfgang‐Gaede‐Str. 1 76131 Karlsruhe Germany
2 shared publicationsSebastian Kalt
Institute of Applied Physics (APH) Karlsruhe Institute of Technology (KIT) Wolfgang‐Gaede‐Str. 1 76131 Karlsruhe Germany
2 shared publicationsAlba Viejo Rodriguez
Department of Physics Umeå University Linnaeus väg 24 Umeå 901 87 Sweden
1 shared publicationAnton Huber
Institute for Astroparticle Physics (IAP) Karlsruhe Institute of Technology (KIT) Hermann‐von‐Helmholtz‐Platz 1 76344 Eggenstein‐Leopoldshafen Germany
1 shared publication- Bikash Kumar Bhandari
University of Otago
1 shared publication - Charlotte West
European Molecular Biology Laboratory, European Bioinformatics Institute (EMBL-EBI), Wellcome Genome Campus, Hinxton, United Kingdom
1 shared publication
Latest Publications
- Open Access
- 23 January 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (9)
A Protocol Using Compact 3D Printed Micro‐Optical Elements for Protein Identification from Low‐Intensity Amino‐Acid Raman Signals
When performing optical high‐speed single‐molecule spectroscopy and identification, low signal intensities pose a challenge. Fortunately, for many applications, the number of possible molecules in the specimen is small or limited. For such cases, a protocol is presented that uses only a small number of very sensitive hence expensive detectors. The protocol starts with optimizing spectral regions, one per detector, so that different molecules become best distinguishable. Experimentally, the spectral regions are extracted from the continuous spectrum using a custom‐made micro‐optical element. In the ray‐optics picture, it guides all rays in a spectral region onto the entrance of an optical fiber connected to one detector. The shape of the micro‐optical element is derived by applying Snell's law to the given geometrical boundary conditions. A proof‐of‐concept measurement using a dedicated demonstrator refractive optical element in combination with a continuous white‐light source is performed. Indeed, the element selects the correct spectral regions and couples the light into the correct fibers. For the example of the identification of single amino acids in a protein, the protocol leads to a higher correct identification rate. Therefore, this protocol is useful for such protein identification experiments as performed in the EU project ProID.
- 23 January 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (9)
Open AccessA Protocol Using Compact 3D Printed Micro‐Optical Elements for Protein Identification from Low‐Intensity Amino‐Acid Raman Signals
When performing optical high‐speed single‐molecule spectroscopy and identification, low signal intensities pose a challenge. Fortunately, for many applications, the number of possible molecules in the specimen is small or limited. For such cases, a protocol is presented that uses only a small number of very sensitive hence expensive detectors. The protocol starts with optimizing spectral regions, one per detector, so that different molecules become best distinguishable. Experimentally, the spectral regions are extracted from the continuous spectrum using a custom‐made micro‐optical element. In the ray‐optics picture, it guides all rays in a spectral region onto the entrance of an optical fiber connected to one detector. The shape of the micro‐optical element is derived by applying Snell's law to the given geometrical boundary conditions. A proof‐of‐concept measurement using a dedicated demonstrator refractive optical element in combination with a continuous white‐light source is performed. Indeed, the element selects the correct spectral regions and couples the light into the correct fibers. For the example of the identification of single amino acids in a protein, the protocol leads to a higher correct identification rate. Therefore, this protocol is useful for such protein identification experiments as performed in the EU project ProID.
- Open Access
- 9 October 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (2)
Multi‐Photon 3D Laser Micro‐Printed Plastic Scintillators for Applications in Low‐Energy Particle Physics
Plastic scintillators are inexpensive to manufacture and therefore a popular alternative to inorganic crystalline scintillators. For many applications, their advantages outweigh their lower light yield. Additionally, it is easier to structure plastic scintillators with well‐developed processing techniques which is of growing relevance in modern applications. One technique to structure plastic material is 3D printing, with noteworthy recent advances in one‐photon‐based approaches. However, some applications require high spatial resolution and optically smooth surfaces, which can be achieved by multi‐photon 3D laser micro‐printing. One application example is the improvement of sensitivity of the Karlsruhe Tritium Neutrino (KATRIN) experiment. This improvement can be realized by printing a 3D scintillator structure as an active transverse energy filter directly onto the detector. Herein, the first two‐photon printable plastic scintillator providing a printing resolution in the micrometer regime is presented. Using the benefits of two‐photon grayscale lithography, optical‐grade surfaces are achieved. The light output is estimated to be 930 photons MeV−1. A prototype structure printed directly on a single‐photon avalanche diode array is demonstrated.
- 9 October 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (2)
Open AccessMulti‐Photon 3D Laser Micro‐Printed Plastic Scintillators for Applications in Low‐Energy Particle Physics
Plastic scintillators are inexpensive to manufacture and therefore a popular alternative to inorganic crystalline scintillators. For many applications, their advantages outweigh their lower light yield. Additionally, it is easier to structure plastic scintillators with well‐developed processing techniques which is of growing relevance in modern applications. One technique to structure plastic material is 3D printing, with noteworthy recent advances in one‐photon‐based approaches. However, some applications require high spatial resolution and optically smooth surfaces, which can be achieved by multi‐photon 3D laser micro‐printing. One application example is the improvement of sensitivity of the Karlsruhe Tritium Neutrino (KATRIN) experiment. This improvement can be realized by printing a 3D scintillator structure as an active transverse energy filter directly onto the detector. Herein, the first two‐photon printable plastic scintillator providing a printing resolution in the micrometer regime is presented. Using the benefits of two‐photon grayscale lithography, optical‐grade surfaces are achieved. The light output is estimated to be 930 photons MeV−1. A prototype structure printed directly on a single‐photon avalanche diode array is demonstrated.
- Open Access
- 12 December 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (12)
On Iterative Pre‐Compensation of 3D Laser‐Printed Micro‐Optical Components Using Confocal‐Optical Microscopy
State‐of‐the‐art 3D two‐photon laser printing systems already use pre‐compensation algorithms to reduce systematic deviations between the printed and the targeted structures. Nevertheless, the remaining deviations are often still larger than the uncontrollable or “statistical” deviations. In principle, it is straightforward to correct for systematic deviations by measuring the difference between printed structure and target and by subtracting the difference from the first target to obtain the next‐iteration target. However, in reality, one faces several issues such as noise and systematic errors of the characterization measurement itself, as well as unwanted translations and rotations between the coordinate systems of the characterization setup and the printer, respectively. Two examples of printed structures requiring sub‐micrometer accuracy are considered, a large 1D micro‐lens array and a specific diffractive optical element. For both, the device performance before the pre‐compensation workflow described herein is insufficient for the targeted application and has become sufficient after this workflow. The workflow involving optimizations using cross‐correlations with confocal‐optical‐microscopy data is documented by an open‐access program (available via GitLab). This program includes an easy‐to‐use graphical user interface so that other researchers can immediately profit from it.
- 12 December 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (12)
Open AccessOn Iterative Pre‐Compensation of 3D Laser‐Printed Micro‐Optical Components Using Confocal‐Optical Microscopy
State‐of‐the‐art 3D two‐photon laser printing systems already use pre‐compensation algorithms to reduce systematic deviations between the printed and the targeted structures. Nevertheless, the remaining deviations are often still larger than the uncontrollable or “statistical” deviations. In principle, it is straightforward to correct for systematic deviations by measuring the difference between printed structure and target and by subtracting the difference from the first target to obtain the next‐iteration target. However, in reality, one faces several issues such as noise and systematic errors of the characterization measurement itself, as well as unwanted translations and rotations between the coordinate systems of the characterization setup and the printer, respectively. Two examples of printed structures requiring sub‐micrometer accuracy are considered, a large 1D micro‐lens array and a specific diffractive optical element. For both, the device performance before the pre‐compensation workflow described herein is insufficient for the targeted application and has become sufficient after this workflow. The workflow involving optimizations using cross‐correlations with confocal‐optical‐microscopy data is documented by an open‐access program (available via GitLab). This program includes an easy‐to‐use graphical user interface so that other researchers can immediately profit from it.