Jaime Castillo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jaime Castillo has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Hernandez
PhD in Engineering Universidad Católica de Temuco Temuco Chile
3 shared publications - Aixa González
Universidad Católica de Temuco
1 shared publication - Alejandra Sanchez
Catholic University of Temuco
1 shared publication - Carlos Manuel Taboada Rodriguez
Federal University of Santa Catarina
1 shared publication - Dafne Lagos
Universidad Católica de Temuco
1 shared publication - Diego Castro Fettermann
Federal University of Santa Catarina
1 shared publication
Latest Publications
- 22 June 2025
- Published by Springer Nature
- p. 255-265
Assessment for Learning in a Thermodynamics Course for Engineering Students
- 22 June 2025
- Published by Springer Nature
- p. 255-265
Assessment for Learning in a Thermodynamics Course for Engineering Students
- Open Access
- 1 November 2024
- Published by Brazilian Journals in Revista de Gestão e Secretariado
- Vol. 15 (11) , e4320
Barreiras à implementação da Indústria 4.0 no Polo Industrial de Manaus
A era da Indústria 4.0 está transformando os setores econômicos por meio da integração de tecnologias como inteligência artificial, IoT, big data, robótica avançada e manufatura aditiva, aumentando eficiência e inovação. O Polo Industrial de Manaus (PIM), um dos principais centros industriais da América Latina, enfrenta desafios na adoção dessas tecnologias, especialmente no setor industrial de eletrodomésticos, o que prejudica seu desenvolvimento econômico e competitividade. Identificar as barreiras à adoção da Indústria 4.0 é crucial para propor soluções que preservem empregos e promovam o progresso industrial. A pesquisa adotou uma abordagem mista, combinando métodos qualitativos e quantitativos. Inicialmente foram identificadas as barreiras com base na literatura mundial, as que posteriormente foram legitimadas com especialistas da área. Em seguida a aplicação da metodologia DEMATEL revelou barreiras importantes para a adoção da Indústria 4.0 no Polo Industrial de Manaus, como falta de infraestrutura tecnológica, necessidade de capacitação, segurança cibernética e alto custo de implementação. Além disso, fatores como resistência à mudança e interoperabilidade atuam como obstáculos que dificultam o avanço tecnológico. O estudo oferece uma estrutura útil para gestores, auxiliando na compreensão dessas barreiras e nas relações entre elas.
- 1 November 2024
- Published by Brazilian Journals in Revista de Gestão e Secretariado
- Vol. 15 (11) , e4320
Open AccessBarreiras à implementação da Indústria 4.0 no Polo Industrial de Manaus
A era da Indústria 4.0 está transformando os setores econômicos por meio da integração de tecnologias como inteligência artificial, IoT, big data, robótica avançada e manufatura aditiva, aumentando eficiência e inovação. O Polo Industrial de Manaus (PIM), um dos principais centros industriais da América Latina, enfrenta desafios na adoção dessas tecnologias, especialmente no setor industrial de eletrodomésticos, o que prejudica seu desenvolvimento econômico e competitividade. Identificar as barreiras à adoção da Indústria 4.0 é crucial para propor soluções que preservem empregos e promovam o progresso industrial. A pesquisa adotou uma abordagem mista, combinando métodos qualitativos e quantitativos. Inicialmente foram identificadas as barreiras com base na literatura mundial, as que posteriormente foram legitimadas com especialistas da área. Em seguida a aplicação da metodologia DEMATEL revelou barreiras importantes para a adoção da Indústria 4.0 no Polo Industrial de Manaus, como falta de infraestrutura tecnológica, necessidade de capacitação, segurança cibernética e alto custo de implementação. Além disso, fatores como resistência à mudança e interoperabilidade atuam como obstáculos que dificultam o avanço tecnológico. O estudo oferece uma estrutura útil para gestores, auxiliando na compreensão dessas barreiras e nas relações entre elas.
- Open Access
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in IAES International Journal of Artificial Intelligence (IJ-AI)
- Vol. 13 (3) , 3129-3140
Emergency patient forecasting with models based on support vector machines
Understanding the dynamic nature of the influx of patients is crucial for efficiently managing supplies, medical personnel, and infrastructure in an emergency room (ER). While overestimation can lead to resource wastage, underestimation can result in shortages and compromised service quality. This study addresses emergency patient forecast by means of implementing support vector machine (SVM) algorithms. Along four phases (analysis, design, development, and validation), more than 50,000 ER records were preprocessed and analyzed. Traditional error metrics such as mean absolute error (MAE), mean square error (MSE), root mean square error (RMSE), and mean absolute percentage error (MAPE) were utilized alongside monthly consolidated forecasts. To benchmark performance, actual values and forecasts derived from linear regression (LR) models were used. Experiments revealed that LR models had lower errors compared to SVM models. However, monthly consolidated forecasts showed that SVM-based models underestimated less than LR-based models. In conclusion, SVM-based models could help planners to accurately estimate the requirements for supplies and medical personnel during the period under study.
- 1 September 2024
- Published by Institute of Advanced Engineering and Science in IAES International Journal of Artificial Intelligence (IJ-AI)
- Vol. 13 (3) , 3129-3140
Open AccessEmergency patient forecasting with models based on support vector machines
Understanding the dynamic nature of the influx of patients is crucial for efficiently managing supplies, medical personnel, and infrastructure in an emergency room (ER). While overestimation can lead to resource wastage, underestimation can result in shortages and compromised service quality. This study addresses emergency patient forecast by means of implementing support vector machine (SVM) algorithms. Along four phases (analysis, design, development, and validation), more than 50,000 ER records were preprocessed and analyzed. Traditional error metrics such as mean absolute error (MAE), mean square error (MSE), root mean square error (RMSE), and mean absolute percentage error (MAPE) were utilized alongside monthly consolidated forecasts. To benchmark performance, actual values and forecasts derived from linear regression (LR) models were used. Experiments revealed that LR models had lower errors compared to SVM models. However, monthly consolidated forecasts showed that SVM-based models underestimated less than LR-based models. In conclusion, SVM-based models could help planners to accurately estimate the requirements for supplies and medical personnel during the period under study.
- Open Access
- 20 December 2023
- Published by MDPI AG in Urban Science
- Vol. 8 (1) , 1
The Role of Performance in Smart Meter’s Acceptance: A Survey in Joinville, Brazil
The incorporation of renewable energy sources necessitates the upgrade of the electrical grid to a smart grid, which involves the implementation of smart meters. Although smart meters provide benefits to users, many smart meter implementation projects have failed to be accepted by users. This article assesses the factors influencing the acceptance of household smart meters in Joinville, a city in the south of Brazil. Based on the Unified and Extended Theory of Acceptance and Use of Technology (UTAUT2), a structural equation model was estimated using data from a sample of 136 respondents in the city of Joinville. The results indicate that Performance Expectancy, Hedonic Motivation, and Social Influence constructs have a more substantial effect on the Intention to Use smart meters. The results provide evidence for planning the upgrade of the electrical grid by implementing smart meters in southern Brazil.
- 20 December 2023
- Published by MDPI AG in Urban Science
- Vol. 8 (1) , 1
Open AccessThe Role of Performance in Smart Meter’s Acceptance: A Survey in Joinville, Brazil
The incorporation of renewable energy sources necessitates the upgrade of the electrical grid to a smart grid, which involves the implementation of smart meters. Although smart meters provide benefits to users, many smart meter implementation projects have failed to be accepted by users. This article assesses the factors influencing the acceptance of household smart meters in Joinville, a city in the south of Brazil. Based on the Unified and Extended Theory of Acceptance and Use of Technology (UTAUT2), a structural equation model was estimated using data from a sample of 136 respondents in the city of Joinville. The results indicate that Performance Expectancy, Hedonic Motivation, and Social Influence constructs have a more substantial effect on the Intention to Use smart meters. The results provide evidence for planning the upgrade of the electrical grid by implementing smart meters in southern Brazil.
- Open Access
- 7 April 2023
- Published by IEOM Society International
- Vol. 12 (7)
Comparing Segmentations Based on Clustering Algorithms to Classify Patients of Intensive Care Units
It is common to classify patients that arrive at an intensive care unit (ICU) by means of a classification based on gender, age and health record. However, it is interesting and helpful to take advantage of additional data to propose alternative patient segmentation that might help allocate more efficiently the existing infrastructure, supplies, medical staff. In this investigation several ICU patients' segmentations were implemented and compared. Different from a supervised task like classification, where datasets have to be a priori labelled to train and to test prediction models, clustering algorithms requires no labelling. Instead, data are grouped according to their degree of similarity. The research was carried out following a 4-phase methodology: analysis, design, development, and validation. During the analysis, a large database with record of the medical care received by patients at the ICU of a public hospital located in the south of Chile was preprocessed and analyzed. During the design, several datasets were prepared to conduct experiments. At this point, the advantages and disadvantages of different clustering algorithms were analyzed and compared, selecting Simple K-Means Algorithm (SKMA) and Expectation-Maximization Clustering (EMC) to proceed with the investigation. Whereas SKMA creates clusters of equal variance, EMC assumes a Gaussian distribution of data. The phase of development was carried out using the data mining software WEKA 3.9.6. To complete the investigation, four datasets of five, ten, fifteen, and twenty thousand ICU records were used. Since no target class was defined, the clustering was the result of applying the selected algorithms: EMC and SKMA. For both cases, different number of clusters (k) were required to establish a comparison. Results revealed clear differences in the outputs generated by each clustering algorithm. For instance, with 5 clusters (k=5) EMC distributes data in the following proportions: 19%, 15%, 10%, 43%, and 28%. With SKMA, instead, the proportion were: 44%, 13%, 10%m 9%, and 24%. In conclusion, the investigation showed that popular clustering algorithms such as EMC and SKMA can be used for segmenting not only consumers but also ICU patients according to criteria that are not easy to visualize with classical tools and techniques. An adequate segmentation can provide valuable information to help estimate the requirement of medical staff, supplies and infrastructure, and also to define specific healthcare services.
- 7 April 2023
- Published by IEOM Society International
- Vol. 12 (7)
Open AccessComparing Segmentations Based on Clustering Algorithms to Classify Patients of Intensive Care Units
It is common to classify patients that arrive at an intensive care unit (ICU) by means of a classification based on gender, age and health record. However, it is interesting and helpful to take advantage of additional data to propose alternative patient segmentation that might help allocate more efficiently the existing infrastructure, supplies, medical staff. In this investigation several ICU patients' segmentations were implemented and compared. Different from a supervised task like classification, where datasets have to be a priori labelled to train and to test prediction models, clustering algorithms requires no labelling. Instead, data are grouped according to their degree of similarity. The research was carried out following a 4-phase methodology: analysis, design, development, and validation. During the analysis, a large database with record of the medical care received by patients at the ICU of a public hospital located in the south of Chile was preprocessed and analyzed. During the design, several datasets were prepared to conduct experiments. At this point, the advantages and disadvantages of different clustering algorithms were analyzed and compared, selecting Simple K-Means Algorithm (SKMA) and Expectation-Maximization Clustering (EMC) to proceed with the investigation. Whereas SKMA creates clusters of equal variance, EMC assumes a Gaussian distribution of data. The phase of development was carried out using the data mining software WEKA 3.9.6. To complete the investigation, four datasets of five, ten, fifteen, and twenty thousand ICU records were used. Since no target class was defined, the clustering was the result of applying the selected algorithms: EMC and SKMA. For both cases, different number of clusters (k) were required to establish a comparison. Results revealed clear differences in the outputs generated by each clustering algorithm. For instance, with 5 clusters (k=5) EMC distributes data in the following proportions: 19%, 15%, 10%, 43%, and 28%. With SKMA, instead, the proportion were: 44%, 13%, 10%m 9%, and 24%. In conclusion, the investigation showed that popular clustering algorithms such as EMC and SKMA can be used for segmenting not only consumers but also ICU patients according to criteria that are not easy to visualize with classical tools and techniques. An adequate segmentation can provide valuable information to help estimate the requirement of medical staff, supplies and infrastructure, and also to define specific healthcare services.
- Open Access
- 7 April 2023
- Published by IEOM Society International
- Vol. 12 (7) , 1666-1679
Building models to predict the diagnosis of emergency department patients using Artificial Neural Networks
There are circumstances in which patients require immediate medical care. Usually, hospitals have a specialized unit ready to take care of emergencies such as: strokes, heart attacks, sepsis, severe wounds, and other medical conditions that are also classifies as emergencies. This research compared models based on artificial neural networks (ANN) to predict the diagnosis of patients received at the emergency department (ED) of a public hospital. The research was carried out following a classic 4-phase methodology: analysis, design, development, and validation. During the analysis, patient records collected by ED personnel during 2020 were thoroughly reviewed and preprocessed. During the design, some of the records were selected and divided into several subsets following specific criteria. Each subset was a set of independent variables used as input to build a prediction model. Technical considerations relate to the artificial neural networks (ANN) such as the number of hidden layers and the number of epochs, batch size, size of the training and test set, and size of the validation dataset were also defined at these point. The phases of construction and the validation are carried out entirely using the WEKA 3.9.6. Numerous experiments, trial and error adjustments, and replications were necessary to produce the results shown in this article. For the purposes is the present work around 15,000 records were considered. The complete dataset was divided in two parts: 80% for training and test, and the remaining 20% for validation. The approach to predict the patient diagnose considered the construction of ANNs with of independent variables. During the construction several configurations of ANNs were tried to achieve better results. Only the records allocated for training and test dataset is used during the construction. The performance of the proposed models was measured in terms of the rate of correct predictions made with records allocated for validation. The experimental result revealed that, depending on the number of diagnoses, the values of the target class, the proposed models were able to predict correctly between 55% and 85% of the cases. In conclusion, ANN-based models can help predict ED patients' diagnosis with a reasonable degree of certainty. However, the success of the model depends greatly on the numbers of values that the target class has.
- 7 April 2023
- Published by IEOM Society International
- Vol. 12 (7) , 1666-1679
Open AccessBuilding models to predict the diagnosis of emergency department patients using Artificial Neural Networks
There are circumstances in which patients require immediate medical care. Usually, hospitals have a specialized unit ready to take care of emergencies such as: strokes, heart attacks, sepsis, severe wounds, and other medical conditions that are also classifies as emergencies. This research compared models based on artificial neural networks (ANN) to predict the diagnosis of patients received at the emergency department (ED) of a public hospital. The research was carried out following a classic 4-phase methodology: analysis, design, development, and validation. During the analysis, patient records collected by ED personnel during 2020 were thoroughly reviewed and preprocessed. During the design, some of the records were selected and divided into several subsets following specific criteria. Each subset was a set of independent variables used as input to build a prediction model. Technical considerations relate to the artificial neural networks (ANN) such as the number of hidden layers and the number of epochs, batch size, size of the training and test set, and size of the validation dataset were also defined at these point. The phases of construction and the validation are carried out entirely using the WEKA 3.9.6. Numerous experiments, trial and error adjustments, and replications were necessary to produce the results shown in this article. For the purposes is the present work around 15,000 records were considered. The complete dataset was divided in two parts: 80% for training and test, and the remaining 20% for validation. The approach to predict the patient diagnose considered the construction of ANNs with of independent variables. During the construction several configurations of ANNs were tried to achieve better results. Only the records allocated for training and test dataset is used during the construction. The performance of the proposed models was measured in terms of the rate of correct predictions made with records allocated for validation. The experimental result revealed that, depending on the number of diagnoses, the values of the target class, the proposed models were able to predict correctly between 55% and 85% of the cases. In conclusion, ANN-based models can help predict ED patients' diagnosis with a reasonable degree of certainty. However, the success of the model depends greatly on the numbers of values that the target class has.