BPBharat Pant

Bharat Pant

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bharat Pant has a total of 59 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Self-organized Ag-Sb lamellae redirect cracks in all-solid-state Li metal batteries

    by Hongli Zhu, Cheng Xu, Shiyao Lin, Bharat Pant, Ye Cao, Jiwei Wang, Han Su, Hua Zhou, Luxi Li, Xianhui Zhao, et al.

    Interfacial instability and crack-assisted lithium (Li) dendrite propagation limit the practical deployment of all-solid-state Li metal batteries. Applying stack pressure improves interfacial contact but also accelerates through-thickness crack propagation without stabilizing the Li/solid-electrolyte interface. Here, we overcome this intrinsic tradeoff by using an in-situ generated self-organized Ag-Sb lamellar interlayer at the Li/solid electrolyte interface that continuously redirects crack propagation and Li growth parallel to the electrode. Sequential lithiation of Sb- and Ag-rich phases produces alternating Li 3 Sb- and Li 2 AgSb-rich lamellae due to lattice-mismatch strain. Synchrotron X-ray tomography, electron microscopy, finite-element and phase-field modelling reveal that through-thickness cracks are redirected into lateral cracks along the lamellar phase, limiting Li penetration into the solid electrolyte. Consequently, symmetric cells operate up to 9.0 mA cm − 2 at 9.0 mAh cm − 2 , while Li-S cells cycle stably at 4.91 mAh cm − 2 , whereas cells without the interlayer short-circuit during the first charging cycle. These findings establish a cycling-adaptive self-organized interfacial strategy that suppresses dendrites through crack redirection rather than direct mechanical blocking.

  • Autonomous Multistate Nanoencoding Using Combinatorial Ferroelectric Closure Domains in BiFeO3

    by Marti Checa, Ruben Millan-Solsona, Yongtao Liu, Bharat Pant, Alexander Puretzky, Ye Cao, Puneet Kaur, Jan-Chi Yang, Liam Collins, Neus Domingo, et al.

    Recent advances in ferroic materials have identified topological defects as promising candidates for enabling additional functionalities in future electronic systems. The generation of stable and customizable polar topologies is needed to achieve multistates that enable beyond-binary device architectures. In this study, we show how to autonomously pattern on-demand highly tunable striped closure domains in pristine rhombohedral-phase BiFeO3 thin films through precise scanning of a biased atomic force microscopy tip along carefully designed paths. By employing this strategy, we generate and manipulate closed-loop structures with high spatial resolution in an automated manner, allowing the creation of highly tunable and intricate topological domain structures that exhibit distinct polarization configurations without the need for electrode deposition or complex heterostructure growth. As a proof-of-concept for ferroelectric beyond-binary memory devices, we use such topological domains as multistates, engineering an alphabet and automating the symbolic writing/reading process using autonomous microscopy. The resulting information density is compared with that of current commercially available memory devices, demonstrating the potential of ferroelectric topological domains for multistate information storage applications.


  • Dendrite Growth and Dead Lithium Formation in Lithium Metal Batteries and Mitigation Using a Protective Layer: A Phase-Field Study

    by Bharat Raj Pant, Yao Ren, Ye Cao

    Lithium metal batteries (LMBs) are considered one of the most promising next-generation rechargeable batteries due to their high specific capacity. However, severe dendrite growth and subsequent formation of dead lithium (Li) during the battery cycling process impede its practical application. Although extensive experimental studies have been conducted to investigate the cycling process, and several theoretical models were developed to simulate the Li dendrite growth, there are limited theoretical studies on the dead Li formation, as well as the entire cycling process. Herein, we developed a phase-field model to simulate both electroplating and stripping process in a bare Li anode and Li anode covered with a protective layer. A step function is introduced in the stripping model to capture the dynamics of dead Li. Our simulation clearly shows the growth of dendrites from a bare Li anode during charging. These dendrites detach from the bulk anode during discharging, forming dead Li. Dendrite growth becomes more severe in subsequent cycles due to enhanced surface roughness of the Li anode, resulting in an increasing amount of dead Li. In addition, it is revealed that dendrites with smaller base diameters detach faster at the base and produce more dead lithium. Meanwhile, the Li anode covered with a protective layer cycles smoothly without forming Li dendrite and dead Li. However, if the protective layer is fractured, Li metal preferentially grows into the crack due to enhanced Li-ion (Li+) flux and forms a dendrite structure after penetration through the protective layer, which accelerates the dead Li formation in the subsequent stripping process. Our work thus provides a fundamental understanding of the mechanism of dead Li formation during the charging/discharging process and sheds light on the importance of the protective layer in the prevention of dead Li in LMBs.


  • Open Access

    On-demand nanoengineering of in-plane ferroelectric topologies

    by Marti Checa, Bharat Pant, Alexander Puretzky, Bogdan Dryzhakov, Rama K. Vasudevan, Yongtao Liu, Pravin Kavle, Arvind Dasgupta, Lane W. Martin, Ye Cao, et al.

    Hierarchical assemblies of ferroelectric nanodomains, so-called super-domains, can exhibit exotic morphologies that lead to distinct behaviours. Controlling these super-domains reliably is critical for realizing states with desired functional properties. Here we reveal the super-switching mechanism by using a biased atomic force microscopy tip, that is, the switching of the in-plane super-domains, of a model ferroelectric Pb0.6Sr0.4TiO3. We demonstrate that the writing process is dominated by a super-domain nucleation and stabilization process. A complex scanning-probe trajectory enables on-demand formation of intricate centre-divergent, centre-convergent and flux-closure polar structures. Correlative piezoresponse force microscopy and optical spectroscopy confirm the topological nature and tunability of the emergent structures. The precise and versatile nanolithography in a ferroic material and the stability of the generated structures, also validated by phase-field modelling, suggests potential for reliable multi-state nanodevice architectures and, thereby, an alternative route for the creation of tunable topological structures for applications in neuromorphic circuits.


  • Top Cited Papers
    Open Access

    Manipulating the diffusion energy barrier at the lithium metal electrolyte interface for dendrite-free long-life batteries

    by Jyotshna Pokharel, Arthur Cresce, Bharat Pant, Moon Young Yang, Ashim Gurung, Wei He, Abiral Baniya, Buddhi Sagar Lamsal, Zhongjiu Yang, Stephen Gent, et al.

    Constructing an artificial solid electrolyte interphase (SEI) on lithium metal electrodes is a promising approach to address the rampant growth of dangerous lithium morphologies (dendritic and dead Li0) and low Coulombic efficiency that plague development of lithium metal batteries, but how Li+ transport behavior in the SEI is coupled with mechanical properties remains unknown. We demonstrate here a facile and scalable solution-processed approach to form a Li3N-rich SEI with a phase-pure crystalline structure that minimizes the diffusion energy barrier of Li+ across the SEI. Compared with a polycrystalline Li3N SEI obtained from conventional practice, the phase-pure/single crystalline Li3N-rich SEI constitutes an interphase of high mechanical strength and low Li+ diffusion barrier. We elucidate the correlation among Li+ transference number, diffusion behavior, concentration gradient, and the stability of the lithium metal electrode by integrating phase field simulations with experiments. We demonstrate improved reversibility and charge/discharge cycling behaviors for both symmetric cells and full lithium-metal batteries constructed with this Li3N-rich SEI. These studies may cast new insight into the design and engineering of an ideal artificial SEI for stable and high-performance lithium metal batteries.


  • Open Access

    Garnet-Based Solid-State Li Batteries with High-Surface-Area Porous LLZO Membranes

    by Huanyu Zhang, Faruk Okur, Bharat Pant, Matthias Klimpel, Sofiia Butenko, Dogan Tarik Karabay, Annapaola Parrilli, Antonia Neels, Ye Cao, Kostiantyn V. Kravchyk, et al.

    Rechargeable garnet-based solid-state Li batteries hold immense promise as nonflammable, nontoxic, and high energy density energy storage systems, employing Li7La3Zr2O12 (LLZO) with a garnet-type structure as the solid-state electrolyte. Despite substantial progress in this field, the advancement and eventual commercialization of garnet-based solid-state Li batteries are impeded by void formation at the LLZO/Li interface at practical current densities and areal capacities beyond 1 mA cm-2 and 1 mAh cm-2, respectively, resulting in limited cycling stability and the emergence of Li dendrites. Additionally, developing a fabrication approach for thin LLZO electrolytes to achieve high energy density remains paramount. To address these critical challenges, herein, we present a facile methodology for fabricating self-standing, 50 μm thick, porous LLZO membranes with a small pore size of ca. 2.3 μm and an average porosity of 51%, resulting in a specific surface area of 1.3 μm-1, the highest reported to date. The use of such LLZO membranes significantly increases the Li/LLZO contact area, effectively mitigating void formation. This methodology combines two key elements: (i) the use of small pore formers of ca. 1.5 μm and (ii) the use of ultrafast sintering, which circumvents ceramics overdensification using rapid heating/cooling rates of ca. 50 °C per second. The fabricated porous LLZO membranes demonstrate exceptional cycling stability in a symmetrical Li/LLZO/Li cell configuration, exceeding 600 h of continuous operation at a current density of 0.1 mA cm-2.


  • Open Access

    Physics-informed models of domain wall dynamics as a route for autonomous domain wall design via reinforcement learning

    by Benjamin R. Smith, Bharat Pant, Yongtao Liu, Yu-Chen Liu, Jan-Chi Yang, Stephen Jesse, Anahita Khojandi, Sergei V. Kalinin, Ye Cao, Rama Krishnan Vasudevan

    Prompted by limited available data, we explore data-aggregation strategies for material datasets, aiming to boost machine learning performance. Our findings suggest that intuitive aggregation schemes are ineffective in enhancing predictive accuracy.


  • Phase-Field Simulation of a Dynamic Protective Layer for the Inhibition of Dendrite Growth in Zinc Metal Batteries

    by Bharat Pant, Yao Ren, Ye Cao

    Metallic zinc (Zn) has been considered one of the most promising anode materials for next-generation aqueous Zn batteries due to its low redox potential and high storage capacity. However, excessive dendrite formation in Zn metal, corrosion, the evolution of hydrogen gas during the cycling process, and the poor Zn-ion (Zn2+) transport from the electrolyte to the electrode limit its practical application. One of the most effective strategies to suppress Zn dendrite growth and promote Zn2+ transport is to introduce suitable protective layers between the Zn metal electrode and the electrolyte. Herein, we mathematically simulated the dynamic interactions between the Zn deposition on the anode and the resulting displacement of a protective layer that covers the anode, the latter of which can simultaneously inhibit Zn dendrite growth and enhance the Zn2+ transport through the interface between the Zn anode and the protective layer. Our simulation results indicate that a protective layer of high Zn2+ diffusivity not only improves the deposition rate of the Zn metal but also prevents dendrite growth by homogenizing the Zn2+ concentration at the anode surface. In addition, it is revealed that the anisotropic Zn2+ diffusivity in the protective layer influences the 2D diffusion of Zn2+. Higher Zn2+ diffusivity perpendicular to the Zn metal surface inhibits dendrite growth, while higher diffusivity parallel to the Zn metal surface promotes dendrite growth. Our work thus provides a fundamental understanding and a design principle for controlling anisotropic Zn2+ diffusion in the protective layer for better suppression of dendrite growth in Zn metal batteries.