Antoine Pédèches
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Antoine Pédèches has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Fabrice Semond
Université Côte d'Azur, CNRS, CRHEA 4 , rue Bernard Grégory, 06560 Valbonne
2 shared publications - Hélène Rotella
Université Côte d’Azur, CNRS, CRHEA, rue Bernard Grégory, 06560 Valbonne, France
2 shared publications - Ileana Florea
Université Côte d'Azur
2 shared publications - A. Barbier-Cueil
Université Côte d'Azur, CNRS, CRHEA 1 , 06560 Valbonne
1 shared publication - Adrian Iovan
KTH Royal Institute of Technology, Quantum-Nano-Photonics 1 , Stockholm 10450
1 shared publication F. Semond
Université Côte d'Azur, CNRS, CRHEA 2 , Sophia Antipolis, France
1 shared publication
Latest Publications
- 29 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (26)
N-polar AlGaN HEMTs on silicon for reduced contact resistance
Nitrogen-polar (N-polar) AlGaN-channel high electron mobility transistors (HEMTs) offer a promising pathway to overcome the limitations of equivalent metal-polar (M-polar) devices, particularly the high contact resistance associated with increased aluminum content. In this work, we report the growth and fabrication of N-polar AlGaN-channel HEMTs on a silicon substrate by ammonia molecular beam epitaxy (NH3-MBE). N-polarity is achieved using an epitaxial NbN polarity-inversion layer, enabling the growth of a buffer stack with adequate structural and electrical quality. Two heterostructure designs are investigated. Capacitance–voltage and Hall measurements confirm the formation of a high-density two-dimensional electron gas with sheet carrier densities up to 2.4×1013 cm−2. Owing to the elimination of the Al-rich barrier between the surface and the channel (present in M-polar configuration) and improving surface morphology, encouraging low-resistance Ohmic contacts are achieved, with contact resistance reduced below 1 Ω mm on the Al0.2Ga0.8N channel. These results demonstrate the viability of N-polar AlGaN-channel HEMTs on silicon and highlight their potential for next-generation ultra-wide-bandgap power devices on Si.
- 29 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (26)
N-polar AlGaN HEMTs on silicon for reduced contact resistance
Nitrogen-polar (N-polar) AlGaN-channel high electron mobility transistors (HEMTs) offer a promising pathway to overcome the limitations of equivalent metal-polar (M-polar) devices, particularly the high contact resistance associated with increased aluminum content. In this work, we report the growth and fabrication of N-polar AlGaN-channel HEMTs on a silicon substrate by ammonia molecular beam epitaxy (NH3-MBE). N-polarity is achieved using an epitaxial NbN polarity-inversion layer, enabling the growth of a buffer stack with adequate structural and electrical quality. Two heterostructure designs are investigated. Capacitance–voltage and Hall measurements confirm the formation of a high-density two-dimensional electron gas with sheet carrier densities up to 2.4×1013 cm−2. Owing to the elimination of the Al-rich barrier between the surface and the channel (present in M-polar configuration) and improving surface morphology, encouraging low-resistance Ohmic contacts are achieved, with contact resistance reduced below 1 Ω mm on the Al0.2Ga0.8N channel. These results demonstrate the viability of N-polar AlGaN-channel HEMTs on silicon and highlight their potential for next-generation ultra-wide-bandgap power devices on Si.
- 25 May 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (21)
Niobium nitride grown on III-nitrides by MBE: Epitaxial growth and phase transitions, prospects for hybrid superconductor/metal/semiconductor heterostructures on silicon
III–N nitride semiconductor materials have made remarkable breakthroughs in the fields of optoelectronics and electronics using epitaxial heterostructures combining binary and ternary alloys (GaN, AlN, InGaN, and AlGaN). Nowadays, it is interesting to study the epitaxial integration of other nitride materials to implement new functionalities in III-nitride semiconductors. Niobium nitride (NbN), usually deposited by sputtering, is a well-established superconducting metal; therefore, it is interesting to investigate NbN epitaxy and its integration with III-nitrides. Using ammonia-molecular beam epitaxy (MBE-NH3), the epitaxial growth of NbN thin films on aluminum nitride (AlN) grown on silicon is studied. Three different phases, δ-NbN, the superconducting cubic-phase, β-Nb2N, the niobium-rich hexagonal phase, and ε-NbN, the 1:1 stoichiometric hexagonal phase, are stabilized. Phases are characterized ex situ by x-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy. The three phases are also well identified in situ by specific reflection high energy electron diffraction patterns, which allow to study phase transitions during annealing. An experimental phase diagram is established. Various heterostructures combining III-N materials and NbN are epitaxially grown on silicon substrates, demonstrating the potential of this system for fabricating epitaxial hybrid superconductor/metal/semiconductor heterostructures.
- 25 May 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (21)
Niobium nitride grown on III-nitrides by MBE: Epitaxial growth and phase transitions, prospects for hybrid superconductor/metal/semiconductor heterostructures on silicon
III–N nitride semiconductor materials have made remarkable breakthroughs in the fields of optoelectronics and electronics using epitaxial heterostructures combining binary and ternary alloys (GaN, AlN, InGaN, and AlGaN). Nowadays, it is interesting to study the epitaxial integration of other nitride materials to implement new functionalities in III-nitride semiconductors. Niobium nitride (NbN), usually deposited by sputtering, is a well-established superconducting metal; therefore, it is interesting to investigate NbN epitaxy and its integration with III-nitrides. Using ammonia-molecular beam epitaxy (MBE-NH3), the epitaxial growth of NbN thin films on aluminum nitride (AlN) grown on silicon is studied. Three different phases, δ-NbN, the superconducting cubic-phase, β-Nb2N, the niobium-rich hexagonal phase, and ε-NbN, the 1:1 stoichiometric hexagonal phase, are stabilized. Phases are characterized ex situ by x-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy. The three phases are also well identified in situ by specific reflection high energy electron diffraction patterns, which allow to study phase transitions during annealing. An experimental phase diagram is established. Various heterostructures combining III-N materials and NbN are epitaxially grown on silicon substrates, demonstrating the potential of this system for fabricating epitaxial hybrid superconductor/metal/semiconductor heterostructures.
- Open Access
- 18 December 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (25)
NbN thin films grown on silicon by molecular beam epitaxy for superconducting detectors
Superconducting nanowire single photon detectors (SNSPDs) made with thin NbN films can reach high performances. While sputtering has been the deposition method of choice, here, we show that ammonia-molecular beam epitaxy (NH3-MBE) can produce pertinent epitaxial cubic NbN thin films on silicon substrates using an AlN buffer. Despite granular morphology and a high density of grain boundaries as well as the presence of rotational twins, Tc = 12.7 K for a 5.6 nm thick film and saturation of internal detection efficiency up to 850 nm are achieved. Morphology and stoichiometry as well as strain have a strong impact on the detector properties, highlighting the importance of a precise control of the growth parameters. These results pave the way for high fabrication yield of SNSPDs on large-scale silicon wafers using epitaxial NbN thin films grown by MBE.
- 18 December 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (25)
Open AccessNbN thin films grown on silicon by molecular beam epitaxy for superconducting detectors
Superconducting nanowire single photon detectors (SNSPDs) made with thin NbN films can reach high performances. While sputtering has been the deposition method of choice, here, we show that ammonia-molecular beam epitaxy (NH3-MBE) can produce pertinent epitaxial cubic NbN thin films on silicon substrates using an AlN buffer. Despite granular morphology and a high density of grain boundaries as well as the presence of rotational twins, Tc = 12.7 K for a 5.6 nm thick film and saturation of internal detection efficiency up to 850 nm are achieved. Morphology and stoichiometry as well as strain have a strong impact on the detector properties, highlighting the importance of a precise control of the growth parameters. These results pave the way for high fabrication yield of SNSPDs on large-scale silicon wafers using epitaxial NbN thin films grown by MBE.