Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Richard Wilhelm van Nieuwenhoven has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Sustainability Gap in Biomimetics: Performance-DrivenDesign Versus Material Circularity

    by Daniela Miano, Richard Wilhelm van Nieuwenhoven, Astrid Albrecht-Kramreiter, Ille Gebeshuber, Markus Valtiner

    Biomimetic performance does not necessarily imply material sustainability, because biological functions can be reproduced without adopting the material logic that enables resource efficiency, repair, and material cycling in natural systems. This mismatch reflects a broader sustainability challenge in which the transition toward carbon-neutral technologies has prioritised CO2 reduction while the depletion of non-renewable primary resources and accumulation of non-recyclable synthetic materials remain equally pressing. Although biomimetic design draws inspiration from biological systems associated with resource efficiency, repair, and material cycling, many technical implementations rely on thermoset polymers, epoxy-based composites, fluorinated coatings, or hybrid nanostructures with few end-of-life options. This mismatch is especially critical in nanoscale coatings, multilayered surfaces, and hybrid interfaces, where performance depends on material combinations that are difficult to separate. This review examines the sustainability gap in biomimetics between performance-driven design and material circularity, and argues for moving beyond carbon-centred assessment toward life-cycle-based material evaluation. Through selected examples spanning bio-derived polymers, silicates, engineered living materials, and biohybrid interfaces, we identify opportunities and limitations of current strategies. We discuss bio-derived polymers, including chitosan, collagen, gelatin, and keratin, as platforms connecting biological function with milder processing, interfacial control, and controlled degradation. Obtained from renewable or waste biomass streams, they reduce dependence on fossil-based materials. Combined with surface engineering such as laser patterning, biomimetic mineralisation, or controlled cross-linking, these materials can support wetting control, adhesion modulation, bioactivity, and optical response. However, these benefits depend on balancing operational stability against end-of-life degradation. Biomimetic design should therefore move beyond imitating biological form or function and incorporate the material logic of biological systems: hierarchical organisation, reversible interactions, repair, and controlled reintegration into material cycles. Two gaps constrain evidence-based material selection: life-cycle assessment data specific to biomimetic implementations remain scarce, and the reviewed platforms differ considerably in industrial readiness. We propose regenerative biomimetics as a material-level design framework in which biological function, material origin, processing, operational stability, and end-of-life behaviour are considered together, addressing resource depletion alongside carbon emissions.

  • Open Access

    Ultra-Short Laser Micro- and Nanopatterning of Polyethylene Terephthalate (PET): Towards Surface Topographies for Antibacterial and Self-Cleaning Applications

    by Liliya Angelova, Aleksandra Zhelyazkova, Laura L. E. Mears, Daniela Miano, Richard van Nieuwendhowen, Albena Daskalova

    Antimicrobial resistance is a critical global challenge that necessitates the development of durable, material-based strategies to limit pathogen survival and transmission. Conventional cleaning and disinfection methods only provide transient protection due to rapid surface re-contamination. This study investigates the fabrication of polyethylene terephthalate (PET) surfaces designed for antibacterial applications via femtosecond laser-induced micro- and nanostructuring. Surface texturing was performed using a Ti:sapphire femtosecond laser (wavelength λ = 800 nm, pulse duration τ = 70 fs) at peak laser fluences (F) of 2.04 J/cm2 and 4.08 J/cm2, generating hierarchical surface textures with controlled morphology, spacing, and geometry through ultrafast, non-contact laser processing while preserving the bulk properties of PET. The resulting patterns, including parallel and intersecting microchannels decorated with laser-induced nanostructures, enabled tunable surface roughness and wettability, with water contact angles ranging from 33.21° to 118.2°. Comprehensive surface characterization, including morphological, topographical, and wettability analyses, was performed to establish structure–property relationships associated with previously reported antibacterial surface design principles. However, direct antibacterial performance was not evaluated in the present study and will be the subject of future investigations. In addition, the durability of the laser-structured PET was evaluated under simulated real-life conditions, including thermal cycling, ultraviolet exposure, abrasion, chemical resistance, and dust contamination. The structured surfaces demonstrated high structural and functional stability following environmental testing. The results indicate that the laser-induced surface modifications remain stable under conditions representative of prolonged practical use, supporting their potential long-term applicability for antibacterial and self-cleaning PET surfaces.

  • Open Access

    From nanostructure to function: hierarchical functional structures in chitin and keratin

    by Julia Freigassner, Richard W. van Nieuwenhoven, Ille C. Gebeshuber

    Chitin and keratin are naturally abundant biopolymers. They hold significant potential for sustainable applications due to their chemical structure, (nano)structural properties, biodegradability and nontoxicity. Chitin, a polysaccharide contained in exoskeletons of arthropods and the cell walls of fungi, forms strong hydrogen bonds that confer mechanical stability, which is ideal for use in protective structures and lightweight composites. Keratin, a fibrous protein found in vertebrate epithelial tissues such as wool, feathers and hair, is characterized by its high sulfur content and the formation of disulfide bonds, which provide both mechanical strength and flexibility. Utilizing chitin and keratin waste materials from the food industry, such as shrimp shells, chicken feathers and sheep wool, offers an eco-friendly alternative to synthetic materials and leverages their inherent biocompatibility. Additionally to the common macroscale reuse of chitin and keratin waste as fertilizer or livestock feed, using chitin and keratin as functional materials adds further uses for these versatile materials. The waste is increasingly being utilized specifically for its superior structural properties resulting from nanoscale functionalities. Chitin and keratin exhibit excellent thermal insulation properties, making them suitable for energy-efficient building materials. Their structural colours (e.g., in butterflies and birds), arising from micro- and nanoscale arrangements, offer non-fading colouration for textiles and coatings without the need for potentially harmful dyes. Additionally, these biopolymers provide lightweight yet strong materials ideal for packaging, consumer products, and – when smartly structured – even passive radiative cooling applications. Biomimetic designs based on chitin and keratin promise advancements across multiple fields by harnessing their natural properties and converting waste into high-value products, thereby addressing recycling issues and promoting sustainability.


  • Open Access

    Engineered Living Materials II (NanoTrust-Dossier No65en - June 2025)

    by Richard W. van Nieuwenhoven, Lukas Hageneder, Ille C. Gebeshuber

    Das NanoTrust-Team bietet an dieser Stelle in loser Folge sog. Dossiers an, die in leicht-fasslicher, aber wissenschaftlich fundierter Weise auf ca. drei bis sechs Seiten den aktuellen Wissensstand zu den aktuellen Themen der aufkommmenden Nanodebatte zusammenfassen.

  • Open Access

    Engineered Living Materials I (NanoTrust-Dossier No 064en - April 2025)

    by Richard W. van Nieuwenhoven, Lukas Hageneder, Ille C. Gebeshuber

    Das NanoTrust-Team bietet an dieser Stelle in loser Folge sog. Dossiers an, die in leicht-fasslicher, aber wissenschaftlich fundierter Weise auf ca. drei bis sechs Seiten den aktuellen Wissensstand zu den aktuellen Themen der aufkommmenden Nanodebatte zusammenfassen.


  • Open Access

    Biomimetic Cooling: Functionalizing Biodegradable Chitosan Films with Saharan Silver Ant Microstructures

    by Markus Zimmerl, Richard W. van Nieuwenhoven, Karin Whitmore, Wilfried Vetter, Ille C. Gebeshuber

    The increasing occurrence of hot summer days causes stress to both humans and animals, particularly in urban areas where temperatures can remain high, even at night. Living nature offers potential solutions that require minimal energy and material costs. For instance, the Saharan silver ant (Cataglyphis bombycina) can endure the desert heat by means of passive radiative cooling induced by its triangular hairs. The objective of this study is to transfer the passive radiative cooling properties of the micro- and nanostructured chitin hairs of the silver ant body to technically usable, biodegradable and bio-based materials. The potential large-scale transfer of radiative cooling properties, for example, onto building exteriors such as house facades, could decrease the need for conventional cooling and, therefore, lower the energy demand. Chitosan, a chemically altered form of chitin, has a range of medical uses but can also be processed into a paper-like film. The procedure consists of dissolving chitosan in diluted acetic acid and uniformly distributing it on a flat surface. A functional structure can then be imprinted onto this film while it is drying. This study reports the successful transfer of the microstructure-based structural colors of a compact disc (CD) onto the film. Similarly, a polyvinyl siloxane imprint of the silver ant body shall make it possible to transfer cooling functionality to technically relevant surfaces. FTIR spectroscopy measurements of the reflectance of flat and structured chitosan films allow for a qualitative assessment of the infrared emissivity. A minor decrease in reflectance in a relevant wavelength range gives an indication that it is feasible to increase the emissivity and, therefore, decrease the surface temperature purely through surface-induced functionalities.


  • Open Access

    Harmonizing Nature, Education, Engineering and Creativity: An Interdisciplinary Educational Exploration of Engineered Living Materials, Artistry and Sustainability Using Collaborative Mycelium Brick Construction

    by Richard W. van Nieuwenhoven, Matthias Gabl, Ruth Mateus-Berr, Ille C. Gebeshuber

    This study presents an innovative approach to interdisciplinary education by integrating biology, engineering and art principles to foster holistic learning experiences for middle-schoolers aged 11–12. The focus lies on assembling mycelium bricks as engineered living materials, with promising applications in sustainable construction. Through a collaborative group task, children engage in the hands-on creation of these bricks, gaining insights into mycology, biomaterials engineering and artistic expression. The curriculum introduces fundamental concepts of mycelial growth and its potential in sustainable material development. Children actively participate in fabricating 3D forms (negative and positive) using mycelium bricks, thereby gaining practical knowledge in shaping and moulding living materials. This hands-on experience enhances their understanding of biological processes and cultivates an appreciation for sustainable design principles. The group task encourages teamwork, problem-solving and creativity as children collaboratively compose structures using mycelium bricks. Integrating art into the activity adds a creative dimension, allowing participants to explore aesthetic aspects while reinforcing the project’s interdisciplinary nature. Conversations about the material’s end-of-life and decomposition are framed within the broader context of Nature’s cycles, facilitating an understanding of sustainability. This interdisciplinary pedagogical approach provides a model for educators seeking to integrate diverse fields of knowledge into a cohesive and engaging learning experience. The study contributes to the emerging field of nature-inspired education, illustrating the potential of integrating living materials and 3D-understanding activities to nurture a holistic understanding of science, engineering and artistic expression in young learners.


  • Open Access

    Harmonizing Nature, Engineering, and Creativity: An Interdisciplinary Exploration of Engineered Living Materials, Artistry, and Sustainability in Collaborative Mycelium Brick Construction

    by Richard W. van Nieuwenhoven, Matthias Gabl, Ruth Mateus-Berr, Ille C. Gebeshuber

    This study presents an innovative approach to interdisciplinary education by integrating principles of biology, engineering, and art to foster holistic learning experiences for children. The focus lies in assembling mycelium bricks as engineered living materials with promising applications in sustainable construction. Through a collaborative group task, children engage in the hands-on creation of these bricks, gaining insights into mycology, biomaterials engineering, and artistic expression. The curriculum introduces fundamental concepts of mycelial growth and its potential in sustainable material development. Children actively participate in fabricating 3D forms (negative and positive) using mycelium bricks, thereby gaining practical knowledge in shaping and moulding living materials. This hands-on experience enhances their understanding of biological processes and cultivates an appreciation for sustainable design principles. The group task encourages teamwork, problem solving, and creativity as children collaboratively compose structures using mycelium bricks. Integrating art into the activity adds a creative dimension, allowing participants to explore aesthetic aspects while reinforcing the project’s interdisciplinary nature. Conversations about the material’s end of life and decomposition are framed within the broader context of nature’s cycles, facilitating an understanding of sustainability. This interdisciplinary pedagogical approach provides a model for educators seeking to integrate diverse fields of knowledge into a cohesive and engaging learning experience. The study contributes to the emerging field of biomimetics education, illustrating the potential of integrating living materials and 3D understanding activities to nurture a holistic understanding of science, engineering, and artistic expression in young learners.

  • Open Access

    Enhanced cell wall mechanics in VirtualLeaf enable realistic simulations of plant tissue dynamics

    by Richard W. van Nieuwenhoven, Bruno Hay Mele, Roeland M.H. Merks, Ruth Großeholz

    Computational modelling has become essential to advancing our understanding of plant developmental and physiological processes, necessitating the development of new computational approaches and software. Here, we present VirtualLeaf-2.0, an updated version of this modelling framework for the biophysical and biomechanical interactions between cells in plant tissues, with novel features for more detailed modelling of the cell wall. In particular, the updated version of VirtualLeaf enables detailed modelling of variations in cell wall stability and cell wall sliding up to the level of individual cell wall elements. The plant cell wall plays a pivotal role in plant development and survival, with younger cells generally having thinner, more flexible (primary) walls than older cells. Cell wall stability is further affected by signalling in growth processes and pathogen infection. The improvements of VirtualLeaf lay the groundwork for using VirtualLeaf to address novel questions involving plant tissue dynamics during growth, tissue formation and pathogen defence, as illustrated with example simulations.

  • Open Access

    Harmonizing Nature, Engineering and Creativity: An Interdisciplinary Exploration of Engineered Living Materials, Artistry and Sustainability in Collaborative Mycelium Brick Construction

    by Richard W. van Nieuwenhoven, Matthias Gabl, Ruth Mateus-Berr, Ille C. Gebeshuber

    This study presents an innovative approach to interdisciplinary education by integrating principles of biology, engineering and art to foster holistic learning experiences for children. The focus lies on assembling mycelium bricks as engineered living materials with promising applications in sustainable construction. Through a collaborative group task, children engage in the hands-on creation of these bricks, gaining insights into mycology, biomaterials engineering and artistic expression. The curriculum introduces fundamental concepts of mycelial growth and its potential in sustainable material development. Children actively participate in fabricating 3D forms (negative and positive) using mycelium bricks, thereby gaining practical knowledge in shaping and moulding living materials. This hands-on experience enhances their understanding of biological processes and cultivates an appreciation for sustainable design principles. The group task encourages teamwork, problem-solving, and creativity as children collaboratively compose structures using mycelium bricks. Integrating art into the activity adds a creative dimension, allowing participants to explore aesthetic aspects while reinforcing the project’s interdisciplinary nature. Conversations about the material’s end of life and decomposition are framed within the broader context of Nature’s cycles, facilitating an understanding of sustainability. This interdisciplinary pedagogical approach provides a model for educators seeking to integrate diverse fields of knowledge into a cohesive and engaging learning experience. The study contributes to the emerging field of biomimetics education, illustrating the potential of integrating living materials and 3D understanding activities to nurture a holistic understanding of science, engineering and artistic expression in young learners.