Valeria Turino
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Valeria Turino has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Adam F Holt
Department of Marine Geosciences; Rosenstiel School of Marine, Atmospheric, and Earth Science; University of Miami , FL 33149-1031, USA
1 shared publication- Adam F. Holt
Rosenstiel School of Marine, Atmospheric, and Earth Science University of Miami Miami FL USA
1 shared publication Derek J. Neuharth
Geological Institute ETH Zurich Zurich Switzerland
1 shared publicationHans Jørgen Kjøll
1 shared publication- Hans Jørgen Kjøll
Department of Geosciences University of Oslo Oslo Norway
1 shared publication J. Jakob
Geological Survey of Norway (NGU) Trondheim Norway
1 shared publication
Latest Publications
- Open Access
- 3 July 2026
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 27 (7)
Interface Deformation, Exhumation, and Underplating: The Role of Plate Velocity Changes Throughout the Evolution of a Subduction Zone
Exhumed metamorphic rocks yield critical insights into the mechanical, chemical, and thermal structure of the plate interface that can be used to infer exhumation pathways and their evolution throughout a subduction zone's lifetime. Metamorphosed oceanic rocks often record exhumation and underplating over relatively punctuated time periods, which appear to be linked to specific stages of subduction. Although plate velocities also vary from one stage of subduction to the next, the influence of this time dependence on exhumation and underplating remains unclear. We therefore use 2‐D time‐dependent subduction models to investigate how evolving plate velocities affect the timing and distribution of exhumation and underplating. By extracting plate velocities from a freely evolving subduction model and imposing them on kinematically driven models, we isolate the effects of realistic velocity variations on interface processes without the complexity of a dynamically evolving slab. We also explore the role of interface strength by varying its rheology and composition. In our models, exhumation consistently initiates during a punctuated detachment event following decreases in subduction velocity. Shallow exhumation (<50 km) occurs through corner flow within the accretionary prism, while deeper underplating (<140 km) involves crustal slicing and detachment along the whole interface. Weak interfaces favor continuous and voluminous exhumation, whereas strong interfaces restrict it to brief, punctuated episodes. Underplating is discontinuous throughout but increases in volume as convergence slows. These findings demonstrate that time‐dependent plate velocity variations exert significant control on interface processes and naturally generate punctuated exhumation and underplating consistent with the rock record.
- 3 July 2026
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 27 (7)
Open AccessInterface Deformation, Exhumation, and Underplating: The Role of Plate Velocity Changes Throughout the Evolution of a Subduction Zone
Exhumed metamorphic rocks yield critical insights into the mechanical, chemical, and thermal structure of the plate interface that can be used to infer exhumation pathways and their evolution throughout a subduction zone's lifetime. Metamorphosed oceanic rocks often record exhumation and underplating over relatively punctuated time periods, which appear to be linked to specific stages of subduction. Although plate velocities also vary from one stage of subduction to the next, the influence of this time dependence on exhumation and underplating remains unclear. We therefore use 2‐D time‐dependent subduction models to investigate how evolving plate velocities affect the timing and distribution of exhumation and underplating. By extracting plate velocities from a freely evolving subduction model and imposing them on kinematically driven models, we isolate the effects of realistic velocity variations on interface processes without the complexity of a dynamically evolving slab. We also explore the role of interface strength by varying its rheology and composition. In our models, exhumation consistently initiates during a punctuated detachment event following decreases in subduction velocity. Shallow exhumation (<50 km) occurs through corner flow within the accretionary prism, while deeper underplating (<140 km) involves crustal slicing and detachment along the whole interface. Weak interfaces favor continuous and voluminous exhumation, whereas strong interfaces restrict it to brief, punctuated episodes. Underplating is discontinuous throughout but increases in volume as convergence slows. These findings demonstrate that time‐dependent plate velocity variations exert significant control on interface processes and naturally generate punctuated exhumation and underplating consistent with the rock record.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Stability of Melt Lineaments in Plume-Ridge Interaction Settings: Insights from Two-Phase Flow Models and Wavelet Analysis of the Galápagos Platform
The interaction between mid-ocean ridges and mantle plumes (~1000 km scale) is a fundamental geodynamic process, generating complex spatio-temporal patterns of volcanism exemplified by the Galápagos platform and the prominent, en-echelon Wolf-Darwin lineaments. Unlike axial volcanism driven by pure extension, these off-axis features form in a regime where plate motion and deep plume flow create a dominant shear component. While such lineaments are characteristic of plume-ridge interaction (PRI) settings, the physical mechanisms governing their distinct spacing, orientation, and longevity remain enigmatic. Understanding these mechanisms is critical, as the resulting topographic heterogeneity governs seamount formation, which in turn profoundly influences ocean circulation and the distribution of deep-sea benthic habitats.Here, we test the hypothesis that these lineaments result from melt localization instabilities driven by asthenospheric shear. We employ numerical models of viscous two-phase flow1 to simulate the deformation of pre-existing melt heterogeneities embedded in a porous background, treating the system as a localized shear box. We systematically vary the background porosity (φback= 0.01 - 0.05) and the melt pocket porosity (φmp = 0.04 - 0.08) to determine the conditions under which melt patches remain distinct—forming separate features like the Wolf-Darwin lineaments—versus coalescing into background flow channels.Our results identify a hierarchy of length scales controlling melt structure evolution. Consistent with linear stability analysis and laboratory experiments, we observe an intrinsic background instability scale of λinst ≈ 0.1· δc (where δc is the compaction length). We find that the survival of pre-existing melt pockets follows a gradient dependent on the porosity contrast (φmp/φback): generally, pockets must exceed λinst by a factor of 2–4 to survive shear as intact features. Furthermore, we constrain the critical separation distance for maintaining distinct lineaments. Simulation results demonstrate that a minimum edge-to-edge separation of ≈ 1· δc is required to prevent hydraulic connectivity; below this threshold, pressure gradients drive adjacent patches to connect via background melt channels and coalesce.To validate these scaling laws against natural systems, we apply a quantitative 2D continuous wavelet analysis2 to both simulation porosity fields and high-resolution bathymetry of the Galápagos Archipelago. This comparative spectral approach allows us to objectively quantify the dominant wavelengths and anisotropy of the observed lineaments without bias. By mapping the modeled stability regimes to the observed lineament spacing, we place constraints on the effective mantle viscosity and permeability structure required to preserve the Wolf-Darwin lineaments. These findings provide a mechanical framework for interpreting off-axis volcanism and define specific targets for future seafloor magnetotelluric and seismic anisotropy campaigns aimed at resolving lateral melt transport in PRI system.1Zhongtian Zhang, & Jacob S. Jordan. (2021). Zenodo. https://doi.org/10.5281/zenodo.44606762Ungermann, J. (2025). JuWavelet (v01.03.00). Zenodo. https://doi.org/10.5281/zenodo.16962346
- 14 March 2026
- Published by Copernicus GmbH
Open AccessStability of Melt Lineaments in Plume-Ridge Interaction Settings: Insights from Two-Phase Flow Models and Wavelet Analysis of the Galápagos Platform
The interaction between mid-ocean ridges and mantle plumes (~1000 km scale) is a fundamental geodynamic process, generating complex spatio-temporal patterns of volcanism exemplified by the Galápagos platform and the prominent, en-echelon Wolf-Darwin lineaments. Unlike axial volcanism driven by pure extension, these off-axis features form in a regime where plate motion and deep plume flow create a dominant shear component. While such lineaments are characteristic of plume-ridge interaction (PRI) settings, the physical mechanisms governing their distinct spacing, orientation, and longevity remain enigmatic. Understanding these mechanisms is critical, as the resulting topographic heterogeneity governs seamount formation, which in turn profoundly influences ocean circulation and the distribution of deep-sea benthic habitats.Here, we test the hypothesis that these lineaments result from melt localization instabilities driven by asthenospheric shear. We employ numerical models of viscous two-phase flow1 to simulate the deformation of pre-existing melt heterogeneities embedded in a porous background, treating the system as a localized shear box. We systematically vary the background porosity (φback= 0.01 - 0.05) and the melt pocket porosity (φmp = 0.04 - 0.08) to determine the conditions under which melt patches remain distinct—forming separate features like the Wolf-Darwin lineaments—versus coalescing into background flow channels.Our results identify a hierarchy of length scales controlling melt structure evolution. Consistent with linear stability analysis and laboratory experiments, we observe an intrinsic background instability scale of λinst ≈ 0.1· δc (where δc is the compaction length). We find that the survival of pre-existing melt pockets follows a gradient dependent on the porosity contrast (φmp/φback): generally, pockets must exceed λinst by a factor of 2–4 to survive shear as intact features. Furthermore, we constrain the critical separation distance for maintaining distinct lineaments. Simulation results demonstrate that a minimum edge-to-edge separation of ≈ 1· δc is required to prevent hydraulic connectivity; below this threshold, pressure gradients drive adjacent patches to connect via background melt channels and coalesce.To validate these scaling laws against natural systems, we apply a quantitative 2D continuous wavelet analysis2 to both simulation porosity fields and high-resolution bathymetry of the Galápagos Archipelago. This comparative spectral approach allows us to objectively quantify the dominant wavelengths and anisotropy of the observed lineaments without bias. By mapping the modeled stability regimes to the observed lineament spacing, we place constraints on the effective mantle viscosity and permeability structure required to preserve the Wolf-Darwin lineaments. These findings provide a mechanical framework for interpreting off-axis volcanism and define specific targets for future seafloor magnetotelluric and seismic anisotropy campaigns aimed at resolving lateral melt transport in PRI system.1Zhongtian Zhang, & Jacob S. Jordan. (2021). Zenodo. https://doi.org/10.5281/zenodo.44606762Ungermann, J. (2025). JuWavelet (v01.03.00). Zenodo. https://doi.org/10.5281/zenodo.16962346
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
The effect of magma poor and magma rich rifted margins on continental collision dynamics
Rifted margins form when continents rift apart and are commonly characterized by a thinned transition zone between the continental crust and the oceanic crust. This transition zone can display a wide range of characteristics, which primarily depend on the regional tectonic evolution. The velocity and duration of the rifting process as well as the geodynamic setting influence the properties and geometry of the margins, which are often grouped into two main categories: magma-poor and magma-rich. Magma-rich margins are characterized by large input of mafic melt, while magma-poor margins are characterized by much less magma production during the rifting process, resulting in variations in geometry and rheology of rifted margins worldwide.Using the finite elements code Citcom, we show how different types of rifted margins can influence the dynamics of continental collision, focusing on the time and depth of slab break-off after collision and the fate of margin material. We compared these models as a function of various parameters (e.g., margin length, density, and viscosity), in order to understand how the architecture of a passive margin affects the dynamics of continental collision.We find that rifted margins have a noticeable impact on subduction dynamics, as we observe large variability in slab break-off times and depths. In particular, the presence of a rifted margin can delay slab break-off to up to 60 Myr after the onset of collision. Our results show that a large portion of the weak crust of magma-poor margins is likely to detach from the subducting plate and accrete to the upper plate, while the dense and strong mafic and ultramafic component of magma-rich margins causes most of the margin to subduct and be lost into the mantle, leaving only a small fraction of transitional and oceanic crust at the surface. Therefore, the volume of accreted material is much larger when the margin is magma-poor than magma-rich, which is consistent with geological observations that fossil magma-poor rifted margins are preserved in many mountain ranges, whereas remnants of magma-rich rifted margins are scarce.Importantly, our results show that rifted margin type controls the architecture of the subsequent collisional phase of the Wilson cycle.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessThe effect of magma poor and magma rich rifted margins on continental collision dynamics
Rifted margins form when continents rift apart and are commonly characterized by a thinned transition zone between the continental crust and the oceanic crust. This transition zone can display a wide range of characteristics, which primarily depend on the regional tectonic evolution. The velocity and duration of the rifting process as well as the geodynamic setting influence the properties and geometry of the margins, which are often grouped into two main categories: magma-poor and magma-rich. Magma-rich margins are characterized by large input of mafic melt, while magma-poor margins are characterized by much less magma production during the rifting process, resulting in variations in geometry and rheology of rifted margins worldwide.Using the finite elements code Citcom, we show how different types of rifted margins can influence the dynamics of continental collision, focusing on the time and depth of slab break-off after collision and the fate of margin material. We compared these models as a function of various parameters (e.g., margin length, density, and viscosity), in order to understand how the architecture of a passive margin affects the dynamics of continental collision.We find that rifted margins have a noticeable impact on subduction dynamics, as we observe large variability in slab break-off times and depths. In particular, the presence of a rifted margin can delay slab break-off to up to 60 Myr after the onset of collision. Our results show that a large portion of the weak crust of magma-poor margins is likely to detach from the subducting plate and accrete to the upper plate, while the dense and strong mafic and ultramafic component of magma-rich margins causes most of the margin to subduct and be lost into the mantle, leaving only a small fraction of transitional and oceanic crust at the surface. Therefore, the volume of accreted material is much larger when the margin is magma-poor than magma-rich, which is consistent with geological observations that fossil magma-poor rifted margins are preserved in many mountain ranges, whereas remnants of magma-rich rifted margins are scarce.Importantly, our results show that rifted margin type controls the architecture of the subsequent collisional phase of the Wilson cycle.
- Open Access
- 21 December 2023
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 236 (3) , 1484-1498
Spatio-temporal variability in slab temperature within dynamic 3-D subduction models
Spatio-temporal variability in arc geochemistry and the conditions recorded by exhumed rocks suggest subduction zone thermal structure evolves in time and along-strike. Although much effort has been dedicated to studying subduction zone thermal structure, we lack an understanding of spatio-temporal temperature variability during time-dependent subduction. We model three-dimensional, dynamic subduction and examine the time evolution of the along-strike temperature difference of the slab’s upper surface (“slab-top”) at the center relative to the edge of the subduction zone. We examine this slab-top temperature variability for subduction systems of different widths and with different plate mobilities (i.e., fixed vs. free subducting and overriding plates). In all of our models, the main control on slab-top temperature is convergence rate; either by simply controlling the rate of slab sinking or via the effect it has on the decoupling depth (DD). In the early stages of subduction, more rapid convergence at the plate center produces a cooler slab relative to warmer slab edges. For mature subduction, this flips; a shallower DD at the slab center produces warmer temperatures with respect to the edge. Importantly, our maximum along-strike temperature changes are reduced (≤ 50○C) relative to previous kinematically-driven modeling studies, due to a reduced role for slab-top heating via toroidal flow. Our dynamic subduction models, therefore, point towards a strong time dependence in the sense of along-strike temperature variation, but with relatively low absolute values in geometrically simple subduction zones.
- 21 December 2023
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 236 (3) , 1484-1498
Open AccessSpatio-temporal variability in slab temperature within dynamic 3-D subduction models
Spatio-temporal variability in arc geochemistry and the conditions recorded by exhumed rocks suggest subduction zone thermal structure evolves in time and along-strike. Although much effort has been dedicated to studying subduction zone thermal structure, we lack an understanding of spatio-temporal temperature variability during time-dependent subduction. We model three-dimensional, dynamic subduction and examine the time evolution of the along-strike temperature difference of the slab’s upper surface (“slab-top”) at the center relative to the edge of the subduction zone. We examine this slab-top temperature variability for subduction systems of different widths and with different plate mobilities (i.e., fixed vs. free subducting and overriding plates). In all of our models, the main control on slab-top temperature is convergence rate; either by simply controlling the rate of slab sinking or via the effect it has on the decoupling depth (DD). In the early stages of subduction, more rapid convergence at the plate center produces a cooler slab relative to warmer slab edges. For mature subduction, this flips; a shallower DD at the slab center produces warmer temperatures with respect to the edge. Importantly, our maximum along-strike temperature changes are reduced (≤ 50○C) relative to previous kinematically-driven modeling studies, due to a reduced role for slab-top heating via toroidal flow. Our dynamic subduction models, therefore, point towards a strong time dependence in the sense of along-strike temperature variation, but with relatively low absolute values in geometrically simple subduction zones.
- Open Access
- 14 December 2023
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 128 (12)
The Effect of Magma Poor and Magma Rich Rifted Margins on Continental Collision Dynamics
The transition between non‐rifted continental lithosphere and oceanic lithosphere in rifted margins can display a wide range of characteristics, depending on the regional tectonic evolution. The velocity and duration of the rifting process as well as the geodynamic setting influence the properties and geometry of the margins, which are often grouped into two main categories: magma‐poor and magma‐rich. We show how different types of rifted margins can influence the dynamics of continental collision, focusing on the time and depth of slab break‐off after collision and the fate of margin material. We find that rifted margins have a noticeable impact on subduction dynamics, as we observe large variability in slab break‐off times and depths. In particular, the presence of a rifted margin can delay slab break‐off to up to 60 Myr after the onset of collision. Our results show that a large portion of the weak crust of magma‐poor margins is likely to detach from the subducting plate and accrete to the upper plate, while the dense and strong mafic and ultramafic component of magma‐rich margins causes most of the margin to subduct and be lost into the mantle, leaving only a small fraction of transitional and oceanic crust at the surface. Therefore, the volume of accreted material is much larger when the margin is magma‐poor than magma‐rich, which is consistent with geological observations that fossil magma‐poor rifted margins are preserved in many mountain ranges, whereas remnants of magma‐rich rifted margins are scarce.
- 14 December 2023
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 128 (12)
Open AccessThe Effect of Magma Poor and Magma Rich Rifted Margins on Continental Collision Dynamics
The transition between non‐rifted continental lithosphere and oceanic lithosphere in rifted margins can display a wide range of characteristics, depending on the regional tectonic evolution. The velocity and duration of the rifting process as well as the geodynamic setting influence the properties and geometry of the margins, which are often grouped into two main categories: magma‐poor and magma‐rich. We show how different types of rifted margins can influence the dynamics of continental collision, focusing on the time and depth of slab break‐off after collision and the fate of margin material. We find that rifted margins have a noticeable impact on subduction dynamics, as we observe large variability in slab break‐off times and depths. In particular, the presence of a rifted margin can delay slab break‐off to up to 60 Myr after the onset of collision. Our results show that a large portion of the weak crust of magma‐poor margins is likely to detach from the subducting plate and accrete to the upper plate, while the dense and strong mafic and ultramafic component of magma‐rich margins causes most of the margin to subduct and be lost into the mantle, leaving only a small fraction of transitional and oceanic crust at the surface. Therefore, the volume of accreted material is much larger when the margin is magma‐poor than magma‐rich, which is consistent with geological observations that fossil magma‐poor rifted margins are preserved in many mountain ranges, whereas remnants of magma‐rich rifted margins are scarce.