Daqing Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Daqing Zhang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Changfeng Peng
Sunward Intelligent Equipment Co., Ltd., Changsha 410100, China
1 shared publication - Chaoran Sun
School of Mechanical and Electrical Engineering, Hunan Agricultural University, Changsha 410128, China
1 shared publication - Hongqiang Chen
School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
1 shared publication - Jian Wang
School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
1 shared publication - Jiapeng Wu
College of Mechanical and Electrical Engineering, Hunan Agricultural University, Changsha 410128, China
1 shared publication - Juncheng Hu
College of Mechanical and Electrical Engineering, Hunan Agricultural University, Changsha 410128, China
1 shared publication
Latest Publications
- Open Access
- 18 December 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (24) , 2619
Energy Consumption Assessment of a Tractor Pulling a Five-Share Plow During the Tillage Process
Reducing the fuel consumption of tractors has consistently been a critical challenge that the agricultural machinery industry must address. To investigate the energy consumption during the plowing process of tractors and enhance their economic efficiency, this study conducted comparative experiments under varying plowing speeds and depths. In this experiment, the CAN bus protocol was utilized for the collection of engine operational data, such as rotational speed and fuel flow. A GPS positioning system was adopted to measure the plowing speed of the tractor and combined with the data from the tractor coasting test, and then the energy consumption for operating the plow was determined. In addition, a tension sensor was installed on the three-point hitch to measure the horizontal pull force exerted by the five-share plow during plowing, thereby facilitating the calculation of the energy consumption of agricultural machinery. The findings indicate that when the tractor’s plowing speed is maintained at 5.7 km/h, both the average fuel consumption and the fuel consumption per unit area increase as the plowing depth increases. If the plowing depth is fixed at 23 cm, the average fuel consumption rises with an increase in plowing speed, whereas the fuel consumption per unit area decreases. The experimental data show that during the actual tillage operation of the tractor, the brake thermal efficiency of diesel engines ranges from 21.76% to 28.57%. The energy consumed by agricultural implements accounts for only 11.79% to 17.04% of the total fuel energy. The energy consumed in operating the tractor-drawn plow accounts for merely 7.87% to 13.66% of the diesel engine output energy. Approximately 23.24% to 38.69% of the effective power of the diesel engine is lost during the transmission process. This study provides valuable insights for optimizing the performance of tractors during operation.
- 18 December 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (24) , 2619
Open AccessEnergy Consumption Assessment of a Tractor Pulling a Five-Share Plow During the Tillage Process
Reducing the fuel consumption of tractors has consistently been a critical challenge that the agricultural machinery industry must address. To investigate the energy consumption during the plowing process of tractors and enhance their economic efficiency, this study conducted comparative experiments under varying plowing speeds and depths. In this experiment, the CAN bus protocol was utilized for the collection of engine operational data, such as rotational speed and fuel flow. A GPS positioning system was adopted to measure the plowing speed of the tractor and combined with the data from the tractor coasting test, and then the energy consumption for operating the plow was determined. In addition, a tension sensor was installed on the three-point hitch to measure the horizontal pull force exerted by the five-share plow during plowing, thereby facilitating the calculation of the energy consumption of agricultural machinery. The findings indicate that when the tractor’s plowing speed is maintained at 5.7 km/h, both the average fuel consumption and the fuel consumption per unit area increase as the plowing depth increases. If the plowing depth is fixed at 23 cm, the average fuel consumption rises with an increase in plowing speed, whereas the fuel consumption per unit area decreases. The experimental data show that during the actual tillage operation of the tractor, the brake thermal efficiency of diesel engines ranges from 21.76% to 28.57%. The energy consumed by agricultural implements accounts for only 11.79% to 17.04% of the total fuel energy. The energy consumed in operating the tractor-drawn plow accounts for merely 7.87% to 13.66% of the diesel engine output energy. Approximately 23.24% to 38.69% of the effective power of the diesel engine is lost during the transmission process. This study provides valuable insights for optimizing the performance of tractors during operation.
- Open Access
- 22 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 122
Trajectory Tracking Control of a Skid-Steer Mobile Robot Based on Nonlinear Model Predictive Control with a Hydraulic Motor Velocity Mapping
In this study, we address the trajectory tracking control problem of a hydraulic-driven skid-steer mobile robot. A hierarchical control strategy is proposed to simultaneously consider the robot’s position control and the velocity control of the hydraulic motors. At the upper level, a nonlinear model predictive control (NMPC) method is employed to control the position and heading of the mobile robot. The NMPC controller takes into account the robot’s physical constraints and generates the desired robot motion velocity. Then, to control the hydraulic drive system, a current–velocity mapping-based control method is introduced. By establishing the mapping relationship between the control current applied to the hydraulic motor and its corresponding output velocity, the dynamics of the hydraulic motors are characterized. Consequently, the lower-level controller can directly obtain the control signal for the hydraulic actuator through lookup mappings. Additionally, PID controllers are adopted to compensate for velocity tracking errors. The proposed hierarchical control strategy decouples the robot’s position control and the hydraulic system control, simplifying the overall controller design, leading to improved control performance. To validate the effectiveness of the proposed control strategy, several experiments were conducted on a hydraulic-driven skid-steer mobile robot, and the results demonstrate the effectiveness of the proposed approach.
- 22 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 122
Open AccessTrajectory Tracking Control of a Skid-Steer Mobile Robot Based on Nonlinear Model Predictive Control with a Hydraulic Motor Velocity Mapping
In this study, we address the trajectory tracking control problem of a hydraulic-driven skid-steer mobile robot. A hierarchical control strategy is proposed to simultaneously consider the robot’s position control and the velocity control of the hydraulic motors. At the upper level, a nonlinear model predictive control (NMPC) method is employed to control the position and heading of the mobile robot. The NMPC controller takes into account the robot’s physical constraints and generates the desired robot motion velocity. Then, to control the hydraulic drive system, a current–velocity mapping-based control method is introduced. By establishing the mapping relationship between the control current applied to the hydraulic motor and its corresponding output velocity, the dynamics of the hydraulic motors are characterized. Consequently, the lower-level controller can directly obtain the control signal for the hydraulic actuator through lookup mappings. Additionally, PID controllers are adopted to compensate for velocity tracking errors. The proposed hierarchical control strategy decouples the robot’s position control and the hydraulic system control, simplifying the overall controller design, leading to improved control performance. To validate the effectiveness of the proposed control strategy, several experiments were conducted on a hydraulic-driven skid-steer mobile robot, and the results demonstrate the effectiveness of the proposed approach.