Renato Moreira Teixeira Junior
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Renato Moreira Teixeira Junior has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- José Costa de Macêdo Neto
Universidade do Estado do Amazonas, Brasil
2 shared publications - Roger Hoel Bello
Universidade do Estado do Amazonas, Brasil
2 shared publications - Adailza Aparicio de Miranda
Que o engenheiro de avaliação deve possuir e pela necessidade de se estabelecer o valor real de mercado, de modo
1 shared publication - Adalberto Gomes de Miranda
Doctor in Science and Technology of Materials Universidade do Estado do Amazonas (UEA) Manaus Amazonas Brazil
1 shared publication - Amanda Félix Nunes1 shared publication
- Antonio Claudio Kieling
Universidade do Estado do Amazonas
1 shared publication
Latest Publications
- Open Access
- 2 February 2026
- Published by Editoriales Iberoamericanos in Revista DCS
- Vol. 23 (87) , e4681
Caracterização de compósitos sustentáveis de PET reciclado e fibras de cocos nucifera tratados com adição de nanotubos de carbono
Este trabalho de pesquisa é um estudo sobre o aproveitamento sustentável de fibras do tronco de cocos nucifera (FTCN) e do material Polietileno tereftalato (PET) reciclado, utilizados na produção de materiais compósitos, com e sem adição de Nanotubos de Carbono (NTC), que interessam para empresas e indústrias. O estudo contribuiu para a Educação Ambiental (EA), sobre a sustentabilidade de resíduos sólidos, nas práticas docentes, acadêmicos e discentes de ensino médio. A caracterização foi realizada nos compósitos de fibras de cocos nucifera (conhecidos por coqueiro) tratadas e de PET reciclado, produzindo amostras que foram comparadas ao compósito produzido com adição de NTC. O objetivo geral foi caracterizar os compósitos formados por fibras de cocos nucifera e de PET reciclado e granulado. Os métodos foram de análise das fibras do coqueiro e do PET reciclado, de cada amostra das Fibras de coqueiro e de PET, as quais foram moidas em moinho nas quantidades específicas de cada amostra. Foram utilizados grânulos de Polipropileno (PP) moídos, como reforço no PET, com as três combinações destas amostras na melhoria da produção do compósito. Os pós de cada amostra foram calculados em percentuais de massa na proporção dos compósitos, juntando às amostras e adicionando em cada amostra de compósito, 1,0 g de NTC, depois comparando os compósitos produzidos, sem NTC e com NTC, para finalmente, caracterizar os compósitos nos equipamentos eletrônicos para análises dos compósitos. Os corpos de prova produzidos das amostras foram submetidos a ensaios de tração, análises e obtenção de dados com resultados gráficos.
- 2 February 2026
- Published by Editoriales Iberoamericanos in Revista DCS
- Vol. 23 (87) , e4681
Open AccessCaracterização de compósitos sustentáveis de PET reciclado e fibras de cocos nucifera tratados com adição de nanotubos de carbono
Este trabalho de pesquisa é um estudo sobre o aproveitamento sustentável de fibras do tronco de cocos nucifera (FTCN) e do material Polietileno tereftalato (PET) reciclado, utilizados na produção de materiais compósitos, com e sem adição de Nanotubos de Carbono (NTC), que interessam para empresas e indústrias. O estudo contribuiu para a Educação Ambiental (EA), sobre a sustentabilidade de resíduos sólidos, nas práticas docentes, acadêmicos e discentes de ensino médio. A caracterização foi realizada nos compósitos de fibras de cocos nucifera (conhecidos por coqueiro) tratadas e de PET reciclado, produzindo amostras que foram comparadas ao compósito produzido com adição de NTC. O objetivo geral foi caracterizar os compósitos formados por fibras de cocos nucifera e de PET reciclado e granulado. Os métodos foram de análise das fibras do coqueiro e do PET reciclado, de cada amostra das Fibras de coqueiro e de PET, as quais foram moidas em moinho nas quantidades específicas de cada amostra. Foram utilizados grânulos de Polipropileno (PP) moídos, como reforço no PET, com as três combinações destas amostras na melhoria da produção do compósito. Os pós de cada amostra foram calculados em percentuais de massa na proporção dos compósitos, juntando às amostras e adicionando em cada amostra de compósito, 1,0 g de NTC, depois comparando os compósitos produzidos, sem NTC e com NTC, para finalmente, caracterizar os compósitos nos equipamentos eletrônicos para análises dos compósitos. Os corpos de prova produzidos das amostras foram submetidos a ensaios de tração, análises e obtenção de dados com resultados gráficos.
- Open Access
- 12 August 2024
- Published by Uniao Atlantica de Pesquisadores in Concilium
- Vol. 24 (16) , 444-468
Graphene synthesis and its implications on electrical properties: a comparative study
This study investigates the impact of graphene synthesis techniques, such as chemical exfoliation, Chemical Vapor Deposition (CVD) and Liquid Phase Exfoliation (LPE) on electrical conductivity. The objective is to understand how variations in synthesis methods influence the morphology of graphene and, consequently, its electrical characteristics. Description techniques are explored in detail to identify how each process affects the structure and electrical performance of graphene. The results indicate that chemical exfoliation introduces more damage to the graphene structure, generally its electrical conductivity, while the CVD method tends to produce graphene with greater uniformity and superior conductivity. LPE, on the other hand, offers a balance between quality and production efficiency, making it particularly promising for large-scale applications. The study provides valuable information for the selection of description methods based on specific graphene application requirements. The discoveries could facilitate the development of more efficient materials for advanced electronics, contributing to the optimization of industrial graphene production processes and promoting advanced advances in materials technology.
- 12 August 2024
- Published by Uniao Atlantica de Pesquisadores in Concilium
- Vol. 24 (16) , 444-468
Open AccessGraphene synthesis and its implications on electrical properties: a comparative study
This study investigates the impact of graphene synthesis techniques, such as chemical exfoliation, Chemical Vapor Deposition (CVD) and Liquid Phase Exfoliation (LPE) on electrical conductivity. The objective is to understand how variations in synthesis methods influence the morphology of graphene and, consequently, its electrical characteristics. Description techniques are explored in detail to identify how each process affects the structure and electrical performance of graphene. The results indicate that chemical exfoliation introduces more damage to the graphene structure, generally its electrical conductivity, while the CVD method tends to produce graphene with greater uniformity and superior conductivity. LPE, on the other hand, offers a balance between quality and production efficiency, making it particularly promising for large-scale applications. The study provides valuable information for the selection of description methods based on specific graphene application requirements. The discoveries could facilitate the development of more efficient materials for advanced electronics, contributing to the optimization of industrial graphene production processes and promoting advanced advances in materials technology.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 28 (4) , e20230162
Different rotations in the acrylonitrile-butadiene-styrene extrusion process and their influence on fracture and mechanical properties
ABS resins have wide application in the market, mainly in the manufacture of household appliances, telephones, automotive industry and others, and need to be processed by extrusion for the manufacture of products. The variables used in the process of extrusion of polymers have a direct influence on their mechanical properties. The objective of this study was to evaluate the different speeds of the extruder screw (15, 30, 45 and 60 rpm) on the mechanical properties of raw ABS after the extrusion process. Izod impact resistance and tensile tests, were also performed. The fractures of the samples tested by Izod impact were observed via optical microscopy, scanning electronic microscopy (SEM), and roughness was measured. Calorimetric tests (DSC) and thermogravimetry (TGA), as well as melt flow index (MFI), were also performed. The most significant results were observed for the extruder screw speed of 60 rpm. For the impact test, a reduction in impact energy of approximately 3% was observed, with the same result for tensile resistance. However, an increase in the value of the elastic modulus and the MFI was observed due to the increase in the degree of crystallinity, which was caused by the higher shear of the polymer mass in the screw of the extrusion equipment. Additionally, an atypical case occurred for the ABS polymer in the highest rotation, since it was the polymer that suffered the greatest shear in the polymer chains due to the degradation of the butadiene phase.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 28 (4) , e20230162
Open AccessDifferent rotations in the acrylonitrile-butadiene-styrene extrusion process and their influence on fracture and mechanical properties
ABS resins have wide application in the market, mainly in the manufacture of household appliances, telephones, automotive industry and others, and need to be processed by extrusion for the manufacture of products. The variables used in the process of extrusion of polymers have a direct influence on their mechanical properties. The objective of this study was to evaluate the different speeds of the extruder screw (15, 30, 45 and 60 rpm) on the mechanical properties of raw ABS after the extrusion process. Izod impact resistance and tensile tests, were also performed. The fractures of the samples tested by Izod impact were observed via optical microscopy, scanning electronic microscopy (SEM), and roughness was measured. Calorimetric tests (DSC) and thermogravimetry (TGA), as well as melt flow index (MFI), were also performed. The most significant results were observed for the extruder screw speed of 60 rpm. For the impact test, a reduction in impact energy of approximately 3% was observed, with the same result for tensile resistance. However, an increase in the value of the elastic modulus and the MFI was observed due to the increase in the degree of crystallinity, which was caused by the higher shear of the polymer mass in the screw of the extrusion equipment. Additionally, an atypical case occurred for the ABS polymer in the highest rotation, since it was the polymer that suffered the greatest shear in the polymer chains due to the degradation of the butadiene phase.