XLXiping Liu

Xiping Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiping Liu has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Eddy Current Loss-Oriented Design of an Axial-Flux PM Machine Using Improved Rotor Bracket and Partially Segmented PM Design

    by Zhiguo Zhu, Xiping Liu, Chen Wang, Dabin Liu, Zhangqi Liu, Dong Chen, Qianli Jia

    Eddy current loss (ECL) critically affects the thermal performance of double-stator single-rotor axial flux permanent magnet machines (AFPMMs). In particular, ECL in the rotor bracket is often overlooked, leading to underestimated heating and inaccurate thermal analysis. To address this issue, this paper presents an ECL-oriented design methodology, incorporating both the improved rotor bracket and partially segmented PM design to collaboratively reduce ECL. First, analytical models of ECL in both rotor bracket and PM are established, providing design guidelines for effective ECL reduction. Based on these guidelines, the groove and groove-segmentation rotor bracket designs along with a partially segmented PM structure, are proposed and introduced. Then, three-dimensional (3D) finite element (FE) analyses are conducted on the proposed designs to evaluate ECL and electromagnetic performance relative to the baseline. The improved rotor brackets achieve at least a 38.5% reduction in ECL, while the partially segmented PM structure yields a 37% reduction, with negligible degradation in electromagnetic performance. Furthermore, structural and thermal analyses are conducted to assess mechanical integrity and thermal characteristics. Finally, an AFPMM prototype incorporating the improved rotor bracket and partially segmented PM design is manufactured and experimentally tested, validating the effectiveness and feasibility of the machine design.

  • Exploring the Active-Short-Circuit Fault Tolerant Capability of Variable Leakage Flux Machine for EV Applications

    by Dabin Liu, Hui Yang, Xiping Liu, Shuhua Fang, Jianwei Liang, Heyun Lin, Liang Chen

    Variable leakage flux machine (VLFM) is considered a competitive candidate for electric vehicle (EV) applications due to its distinct advantages of a wide speed range and high overall efficiency. Meanwhile, the active-short-circuit (ASC) technique is widely implemented for EV traction drive systems to prevent hardware damage from overvoltage during high-speed operation. However, it may induce large ASC currents and unexpected PM demagnetization in turn. Therefore, this article first investigates the potential of ASC fault tolerance in VLFMs, introducing a segmented, arc-shaped PM VLFM design aimed at simultaneously achieving a wide speed range, high efficiency, and improved ASC fault-tolerant capability. Initially, the topologies of the benchmark PM machine (PMM) and VLFMs are introduced and clarified. Then, an ASC fault analysis is conducted to elucidate its underlying principles, and both the steady and transient short-circuit currents are analyzed and compared under ideal scenarios, demonstrating the inherent ASC fault tolerance of the VLFMs. Furthermore, the electromagnetic characteristics, for example, loss distributions and efficiency maps, are compared and investigated, verifying the advantages of the proposed design in terms of speed range and high-speed efficiency. Finally, a prototype is built and experimentally tested to verify the feasibility and effectiveness of the proposed VLFM design. The results provide valuable insights for traction machine design considering practical ASC operation in EV applications.

  • Multi-Stage Optimization Scheme for Partitioned Magnet Pole Variable-Leakage-Flux Machine Considering Flux-Adjustable Range

    by Dabin Liu, Hui Yang, Rui Tu, Xing Liu, Xiping Liu, Heyun Lin, Shuhua Fang, Ya Li, Wei Liu, Liang Chen

    This paper focuses on a multi-stage optimization scheme for variable-leakage-flux machines (VLFMs), where the leakage flux is passively controlled by armature-reaction-induced magnetic saturation. In VLFMs, the magnetic flux is regulated by the flux weakening (FW) method and controllable leakage flux. This intrinsic coupling complicates the consideration in the flux-adjustable range during the optimization procedure, thereby limiting the full utilization of the inherent advantages of the VLF property to optimize the overall performance. Therefore, a novel design optimization scheme is developed for the VLFM in this paper, which can well decouple the armature reaction and VLF property by employing a three-stage field-circuit coupled model. The proposed model accounts for three representative operating conditions. In the first stage, key performance requirements like peak torque at low speed are considered. In the second and third stages, the minimum and maximum q-axis currents are applied, respectively, allowing direct acquisition of the PM flux linkage while eliminating the influence of the d-axis armature reaction. Consequently, the flux-adjustable range can be directly calculated and optimized in the optimization procedure. Afterwards, the proposed design optimization scheme is implemented on a recently developed partitioned magnet pole VLFM (PMP-VLFM) to obtain an optimal design. Finally, finite element (FE) simulations and experimental tests are carried out to verify the feasibility of the proposed design optimization scheme.


  • Evolution and Analysis of Leakage Flux Path for Memory Machine With Variable Leakage Flux Capability

    by Xifang Zhao, Heyun Lin, Yuxiang Zhong, Hui Yang, Xianxian Zeng, Xiping Liu

    To further expand the flux regulation (FR) range, variable leakage flux (LF) technology is introduced into the hybrid magnetic circuit memory machine (HMC-MM). This technology is realized by properly constructing LF paths in the rotor and controlling their saturation degree. However, how to design the LF paths reasonably to achieve the best performance balance of the memory machine (MM) is still a challenging puzzle. In response to this puzzle, this article first evolves a conventional HMC-MM into three variable LF HMC-MMs (V+HMC-MMs) with different LF paths by configuring different q-axis barriers. The influence mechanism of different LF paths on FR range is theoretically revealed by analyzing and comparing the equivalent magnetic circuit models of the above three evolved V+HMC-MMs. Furthermore, the electromagnetic characteristics of the four investigated MMs under different magnetization states (MSs) are comprehensively computed by the finite element (FE) method. Subsequently, through a quantitative comparison and tradeoff of main electromagnetic characteristics, a preferred LF design that can achieve the best performance balance is identified. Finally, a V+HMC-MM prototype with the preferred design is manufactured and tested. Experimental results validate the correctness of the FE analysis.


  • Impacting Mechanism of Variable Leakage Flux on Magnetizing and Demagnetizing Effects in Dual-Variable Flux Memory Machines for EV Traction

    by Xianxian Zeng, Heyun Lin, Hui Yang, Yuxiang Zhong, Xifang Zhao, Xiping Liu

    This article explores the impacting mechanism of variable leakage flux on magnetizing (mag-) and demagnetizing (demag-) effects in dual-variable flux memory machines (D-VFMMs). By reasonably utilizing the variable leakage flux, this kind of machine can achieve higher air-gap flux density by enhancing the mag- effect under high magnetization states (MSs) and lower air-gap flux density by weakening the mag- effect under low MSs. Therefore, an expanded flux regulation (FR) range can be expected without sacrificing torque, which is desired for electric vehicle (EV) traction. The feasibility of regulating the mag- and demag- effects by adjusting the variable leakage flux is first analyzed. The influences of main parameters on the degree of mag- effects are then analyzed in detail. Three topologies are designed to quantitatively investigate the mag- effects by analyzing their electromagnetic properties. Finally, a D-VFMM prototype is manufactured and the impacting mechanism is verified by relevant experiments.


  • A Novel Hybrid Magnetic Circuit Dual-Variable Flux Memory Machine for EV Traction

    by Xianxian Zeng, Heyun Lin, Yuxiang Zhong, Xifang Zhao, Hui Yang, Xiping Liu

    This article proposes a novel hybrid magnetic circuit dual-variable flux memory machine (HMC-D-VFMM) with an enhanced flux regulation (FR) range. By reasonably utilizing two types of variable flux, namely, variable permanent magnet (PM) flux and variable leakage flux, the FR range of the machine can be effectively expanded without any extra cost. Simultaneously, the high torque and load demagnetization withstand (LDW) capability can also be achieved. The feasibility and superiority of the proposed design are theoretically analyzed and demonstrated by comparing the magnetic circuits of the proposed machine and a conventional HMC-VFMM. The electromagnetic characteristics of the two machines under different magnetization states (MSs) are comprehensively analyzed and compared by the finite element (FE) method. Finally, an HMC-D-VFMM prototype is manufactured and tested. Experimental results validate the feasibility of the proposed design.


  • A Novel Hybrid-Variable-Flux Permanent Magnet Machine

    by Dabin Liu, Hui Yang, Yunrui Huang, Rui Tu, Xing Liu, Yuming Yi, Xiping Liu, Heyun Lin

    This paper proposes and investigates a novel hybrid-variable-flux permanent magnet machine (HVF-PMM), which incorporates a variable leakage flux (VLF) property into a hybrid PM variable flux memory machine (VFMM) to broaden the design space. Thus, the conflicts of conventional variable flux PMMs between low- and high-speed key performance metrics balance. The proposed HVF-PMM is geometrically characterized by a leakage flux bypass beside the second layer high coercive force (HCF) PMs, of which the magnetic saturation can be flexibly adjusted by load current and magnetization state (MS) of low coercive force (LCF) PMs jointly. Consequently, the tradeoff issue between HCF and LCF PMs existing in conventional VFMMs can be well addressed, and hence high torque capability at low speeds and high efficiency under high-speed operation can be realized simultaneously. Firstly, the design concept and operating principle of the proposed machine are introduced and analyzed, respectively. Subsequently, the HVF property of the proposed design is investigated using a simplified magnetic circuit model and finite element (FE) method. Furthermore, the electromagnetic characteristics of the proposed machine are analyzed and compared with its counterpart. Finally, a prototype is manufactured and tested to validate the feasibility of both theoretical and FE analyses.


  • Design Concept and Performance Analysis of Dual-Variable Flux Memory Machines for Traction Drive

    by Xianxian Zeng, Heyun Lin, Yuxiang Zhong, Xifang Zhao, Hui Yang, Xiping Liu

    This article proposes the design concept of a dual-variable flux memory machine (D-VFMM) with hybrid permanent magnets (PMs), in which both PM flux and leakage flux are variable. By reasonably controlling the two variable fluxes, the inherent contradiction between the high torque density and wide speed operating range of VFMMs can be readily solved. This article presents the design concept of this kind of machine by taking a new series magnetic circuit D-VFMM for electric vehicles as an example. The superiorities of the dual-variable flux concept are illustrated through a comparative analysis between the proposed machine and a traditional VFMM under specific magnetization states (MSs). The electromagnetic performance of the designed machine across varying MSs is comprehensively analyzed by the finite element method. Finally, a D-VFMM prototype designed according to the presented concept is manufactured and tested. Experimental results validate the superiority of the presented design concept and the feasibility of the prototype for driving electric vehicles.


  • A Novel Hybrid-Magnetic-Circuit Memory Machine With Variable-Leakage-Flux Capability

    by Xifang Zhao, Heyun Lin, Yuxiang Zhong, Hui Yang, Xianxian Zeng, Xiping Liu

    Hybrid magnetic circuit memory machine (HMC-MM) integrates the advantages of parallel and series magnetic circuits. However, when used for wide-speed applications, e.g., electric vehicles, its flux regulation (FR) range still needs to be expanded. In response to this issue, this article proposes a novel variable leakage flux (VLF) HMC-MM (V1HMC-MM), which innovatively introduces the VLF design concept into MM. The proposed machine features that it can not only adjust the FR range by changing the magnetization state of the employed low coercive force permanent magnet but also further broaden the FR range by integrating the VLF design. First, the evolution of conventional HMC-MM rotor to V1HMC-MM rotor is illustrated, followed by a detailed description of their FR principle. The mechanisms that the V1HMC-MM can further improve the FR capability and maintain the excellent antiload demagnetization capability and high torque density are revealed by using equivalent magnetic circuit and graphic methods. The main electromagnetic characteristics of the V1HMC-MM are analyzed and compared with those of the conventional HMC-MM by using finite element (FE) method. Finally, a V1HMC-MM prototype is manufactured, and the correctness of the FE analysis and the superiority of the proposed structure are verified through the measurement on the prototype.