Kei Kinoshita
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kei Kinoshita has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Rai Moriya
Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro, Tokyo 153-8505, Japan
8 shared publications - Takashi Taniguchi
National Institute for Materials Science
8 shared publications - Tomoki Machida
Institute of Industrial Science, The University of Tokyo, Tokyo 153-8505, Japan
8 shared publications - Kenji Watanabe
National Institute for Materials Science
7 shared publications - Momoko Onodera
Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro, Tokyo 153-8505, Japan
7 shared publications - Yijin Zhang
The University of Tokyo
7 shared publications
Latest Publications
- 26 December 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (1) , 254-259
Resonant Tunneling Oscillators Based on WSe 2 / h -BN/WSe 2 van der Waals Double Quantum Wells
A van der Waals (vdW) heterostructure of few-layer (FL)-WSe2/FL-h-BN/FL-WSe2 exhibits resonant tunneling between the WSe2 subbands through the h-BN barrier, analogous to that in conventional double-quantum-well (DQW) structures. This resonant tunneling in the vdW DQW device gives rise to pronounced negative differential resistance (NDR). Utilizing this NDR, we demonstrate a resonant tunneling oscillator: when the vdW DQW device is integrated into an LC resonant circuit and biased within its NDR region, sustained AC voltage oscillations are achieved with frequencies exceeding 1 MHz. Furthermore, a comparison of the oscillation characteristics of two different devices indicates that lowering the device resistance is a viable route toward higher-frequency operation. This work represents the first realization of oscillators based on resonant tunneling between transition-metal dichalcogenide layers, significantly broadening the potential of vdW electronics.
- 26 December 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (1) , 254-259
Resonant Tunneling Oscillators Based on WSe 2 / h -BN/WSe 2 van der Waals Double Quantum Wells
A van der Waals (vdW) heterostructure of few-layer (FL)-WSe2/FL-h-BN/FL-WSe2 exhibits resonant tunneling between the WSe2 subbands through the h-BN barrier, analogous to that in conventional double-quantum-well (DQW) structures. This resonant tunneling in the vdW DQW device gives rise to pronounced negative differential resistance (NDR). Utilizing this NDR, we demonstrate a resonant tunneling oscillator: when the vdW DQW device is integrated into an LC resonant circuit and biased within its NDR region, sustained AC voltage oscillations are achieved with frequencies exceeding 1 MHz. Furthermore, a comparison of the oscillation characteristics of two different devices indicates that lowering the device resistance is a viable route toward higher-frequency operation. This work represents the first realization of oscillators based on resonant tunneling between transition-metal dichalcogenide layers, significantly broadening the potential of vdW electronics.
- 24 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (21)
Negative differential resistance in ReSe2/ h -BN/ReSe2 van der Waals tunnel junction
Van der Waals (vdW) heterostructures composed of two-dimensional (2D) materials offer atomically sharp interfaces and atomic-level control over layer thickness, making them highly suitable for quantum well (QW) applications. Such vdW QWs allow the integration of a wide variety of 2D materials owing to the absence of lattice-matching constraints in vdW interfaces, offering the potential to uncover advanced electronic and optoelectronic functionalities. In this study, we investigated rhenium diselenide (ReSe2) as a promising candidate for a vdW QW material. A ReSe2/h-BN/ReSe2 tunnel junction was constructed using monolayer-to-trilayer-thick ReSe2 as the QW layer and few-layer-thick h-BN as the tunnel barrier. By tuning the carrier polarity of the ReSe2 layers using gate voltages, the electron or hole tunneling characteristics between the QW layers were investigated. For both polarities, the current–voltage characteristics exhibited multiple peaks, which were attributed to tunneling from the source-side ReSe2 into the Γ-point bands of the drain-side ReSe2. In the case of electron tunneling, distinct peaks accompanied by significant negative differential resistance were observed, clearly indicating energy- and momentum-conserved resonant tunneling between the Γ-point bands of the source and drain ReSe2. We found that the bilayer ReSe2 device exhibited a maximum peak-to-valley current ratio (PVR) of 4.1, which is a noticeably high PVR value among vdW-based resonant electron tunneling devices. These results highlight the potential of ReSe2 as an n-type vdW QW material and pave the way for future developments of quantum electronic devices based on 2D material heterostructures.
- 24 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (21)
Negative differential resistance in ReSe2/ h -BN/ReSe2 van der Waals tunnel junction
Van der Waals (vdW) heterostructures composed of two-dimensional (2D) materials offer atomically sharp interfaces and atomic-level control over layer thickness, making them highly suitable for quantum well (QW) applications. Such vdW QWs allow the integration of a wide variety of 2D materials owing to the absence of lattice-matching constraints in vdW interfaces, offering the potential to uncover advanced electronic and optoelectronic functionalities. In this study, we investigated rhenium diselenide (ReSe2) as a promising candidate for a vdW QW material. A ReSe2/h-BN/ReSe2 tunnel junction was constructed using monolayer-to-trilayer-thick ReSe2 as the QW layer and few-layer-thick h-BN as the tunnel barrier. By tuning the carrier polarity of the ReSe2 layers using gate voltages, the electron or hole tunneling characteristics between the QW layers were investigated. For both polarities, the current–voltage characteristics exhibited multiple peaks, which were attributed to tunneling from the source-side ReSe2 into the Γ-point bands of the drain-side ReSe2. In the case of electron tunneling, distinct peaks accompanied by significant negative differential resistance were observed, clearly indicating energy- and momentum-conserved resonant tunneling between the Γ-point bands of the source and drain ReSe2. We found that the bilayer ReSe2 device exhibited a maximum peak-to-valley current ratio (PVR) of 4.1, which is a noticeably high PVR value among vdW-based resonant electron tunneling devices. These results highlight the potential of ReSe2 as an n-type vdW QW material and pave the way for future developments of quantum electronic devices based on 2D material heterostructures.
- 1 October 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (40) , 35592-35600
Resonant Tunneling in WSe2/h-BN/WSe2/h-BN/WSe2 van der Waals Triple Quantum Well Device
Recent advancements in van der Waals quantum well (vdW QW) structures using few-layer transition metal dichalcogenides have led to resonant tunneling devices with substantial negative differential resistance. The performance of these devices, comparable to that of state-of-the-art III-V semiconductor QW devices, suggests that incorporating vdW QW with sophisticated vdW stacking methodologies could lead to innovative quantum devices. In this research, we realize vertical tunneling in a vdW triple QW (TQW) device of trilayer (3L) -WSe2/h-BN/3L-WSe2/h-BN/3L-WSe2. The three-level subbands formed in the 3L WSe2 function as a vdW QW, and the few-layer-thick h-BN acts as a tunnel barrier. Applying a bias between the first and third QWs enables control of the subband resonant tunneling between QWs. The fabricated TQW exhibits five resonant tunneling peaks accompanying a negative differential resistance in the current-voltage characteristics. This is in stark contrast to the double QW, in which only three resonant tunneling peaks are observed. This phenomenon can be attributed to the multiplication of resonant tunneling, originating from the avoided coincidence of resonant tunneling at the first and second tunnel barriers. Our results illustrate the potential of multiple vdW QWs for enhancing the performance of optoelectronic and logic devices.
- 1 October 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (40) , 35592-35600
Resonant Tunneling in WSe2/h-BN/WSe2/h-BN/WSe2 van der Waals Triple Quantum Well Device
Recent advancements in van der Waals quantum well (vdW QW) structures using few-layer transition metal dichalcogenides have led to resonant tunneling devices with substantial negative differential resistance. The performance of these devices, comparable to that of state-of-the-art III-V semiconductor QW devices, suggests that incorporating vdW QW with sophisticated vdW stacking methodologies could lead to innovative quantum devices. In this research, we realize vertical tunneling in a vdW triple QW (TQW) device of trilayer (3L) -WSe2/h-BN/3L-WSe2/h-BN/3L-WSe2. The three-level subbands formed in the 3L WSe2 function as a vdW QW, and the few-layer-thick h-BN acts as a tunnel barrier. Applying a bias between the first and third QWs enables control of the subband resonant tunneling between QWs. The fabricated TQW exhibits five resonant tunneling peaks accompanying a negative differential resistance in the current-voltage characteristics. This is in stark contrast to the double QW, in which only three resonant tunneling peaks are observed. This phenomenon can be attributed to the multiplication of resonant tunneling, originating from the avoided coincidence of resonant tunneling at the first and second tunnel barriers. Our results illustrate the potential of multiple vdW QWs for enhancing the performance of optoelectronic and logic devices.
- 13 October 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (42) , 28968-28976
Negative Differential Resistance Device with High Peak-to-Valley Ratio Realized by Subband Resonant Tunneling of Γ-Valley Carriers in WSe2/h-BN/WSe2 Junctions
Resonant tunneling diodes (RTDs) are a core technology in III-V semiconductor devices. The realization of high-performance RTD using two-dimensional (2D) materials has been long awaited, but it has yet to be accomplished. To this end, we investigate a range of WSe2/h-BN/WSe2 RTD devices by varying the number of layers of source and drain WSe2. The highest peak-to-valley ratio (PVR) is demonstrated in the three-layer (3L) WSe2/h-BN/1-layer (1L) WSe2 structure. The observed PVR values of 63.6 at 2 K and 16.2 at 300 K are the highest among the 2D material-based RTDs reported to date. Our results indicate the two key conditions to achieve high PVR: (1) resonant tunneling should occur between the Γ-point bands of the source and drain electrodes, and (2) the Γ-point bands contributing to the resonant tunneling should be energetically separated from the other bands. Our results provide an important step to outperform III-V semiconductor RTDs with 2D material-based RTDs.
- 13 October 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (42) , 28968-28976
Negative Differential Resistance Device with High Peak-to-Valley Ratio Realized by Subband Resonant Tunneling of Γ-Valley Carriers in WSe2/h-BN/WSe2 Junctions
Resonant tunneling diodes (RTDs) are a core technology in III-V semiconductor devices. The realization of high-performance RTD using two-dimensional (2D) materials has been long awaited, but it has yet to be accomplished. To this end, we investigate a range of WSe2/h-BN/WSe2 RTD devices by varying the number of layers of source and drain WSe2. The highest peak-to-valley ratio (PVR) is demonstrated in the three-layer (3L) WSe2/h-BN/1-layer (1L) WSe2 structure. The observed PVR values of 63.6 at 2 K and 16.2 at 300 K are the highest among the 2D material-based RTDs reported to date. Our results indicate the two key conditions to achieve high PVR: (1) resonant tunneling should occur between the Γ-point bands of the source and drain electrodes, and (2) the Γ-point bands contributing to the resonant tunneling should be energetically separated from the other bands. Our results provide an important step to outperform III-V semiconductor RTDs with 2D material-based RTDs.
- 24 September 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (39) , 12211-12217
Control of Subband Energies via Interlayer Twisting in an Artificially Stacked WSe2 Bilayer
Tuning the electronic structure of artificially stacked bilayer crystals using their twist angle has attracted a significant amount of interest. In this study, resonant tunneling spectroscopy was performed on trilayer WSe2/h-BN/twisted bilayer (tBL) WSe2 devices with a wide range of twist angles (θBL) of tBL WSe2, from 0° to 34°. We observed two resonant tunneling peaks, identified as the first and second lowest hole subbands at the valence band Γ point of tBL WSe2. The subband separation, which directly measured the interlayer coupling strength, was tuned by ∼0.1 eV as θBL increased toward 6° and remained nearly constant for larger θBL values. The θBL dependence was attributed to the emergence of a stable W/Se (Se/W) stacking domain in the small θBL region, owing to the atomic reconstruction of the moiré lattice in tBL WSe2. Our findings demonstrate that the twist-controlled subband energies in tBL WSe2 are predominantly determined by local atomic reconstruction.
- 24 September 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (39) , 12211-12217
Control of Subband Energies via Interlayer Twisting in an Artificially Stacked WSe2 Bilayer
Tuning the electronic structure of artificially stacked bilayer crystals using their twist angle has attracted a significant amount of interest. In this study, resonant tunneling spectroscopy was performed on trilayer WSe2/h-BN/twisted bilayer (tBL) WSe2 devices with a wide range of twist angles (θBL) of tBL WSe2, from 0° to 34°. We observed two resonant tunneling peaks, identified as the first and second lowest hole subbands at the valence band Γ point of tBL WSe2. The subband separation, which directly measured the interlayer coupling strength, was tuned by ∼0.1 eV as θBL increased toward 6° and remained nearly constant for larger θBL values. The θBL dependence was attributed to the emergence of a stable W/Se (Se/W) stacking domain in the small θBL region, owing to the atomic reconstruction of the moiré lattice in tBL WSe2. Our findings demonstrate that the twist-controlled subband energies in tBL WSe2 are predominantly determined by local atomic reconstruction.
- Open Access
- 1 July 2024
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 6 (3) , 033011
Minigap-induced negative differential resistance in multilayer -based tunnel junctionsDespite extensive research, the high-energy band properties of transition metal dichalcogenides remain unexplored. Here, we reveal that a multilayer -based tunnel junction exhibits substantial negative differential resistance (NDR) owing to the presence of a minigap, which is the energy gap between the upper and lower bands of the valence band at the Γ point. We fabricated a highly -doped multilayer -BN/ tunnel junction. When a bias is applied across the junction, holes at the Fermi level at the Γ point in the valence band of the source-side resonantly tunnel to the drain-side with momentum conservation. When the energy of the injected hole coincides with the minigap of the drain-side , the tunneling conductance is suppressed; thus, NDR is observed in the current-voltage characteristics. We identified minigap-induced NDR over a broad range of thicknesses, including the bulk, that was observable even at room temperature.- 1 July 2024
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 6 (3) , 033011
Open AccessMinigap-induced negative differential resistance in multilayer -based tunnel junctionsDespite extensive research, the high-energy band properties of transition metal dichalcogenides remain unexplored. Here, we reveal that a multilayer -based tunnel junction exhibits substantial negative differential resistance (NDR) owing to the presence of a minigap, which is the energy gap between the upper and lower bands of the valence band at the Γ point. We fabricated a highly -doped multilayer -BN/ tunnel junction. When a bias is applied across the junction, holes at the Fermi level at the Γ point in the valence band of the source-side resonantly tunnel to the drain-side with momentum conservation. When the energy of the injected hole coincides with the minigap of the drain-side , the tunneling conductance is suppressed; thus, NDR is observed in the current-voltage characteristics. We identified minigap-induced NDR over a broad range of thicknesses, including the bulk, that was observable even at room temperature. - 27 June 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (30) , 14358-14365
Crossover between rigid and reconstructed moiré lattice in h -BN-encapsulated twisted bilayer WSe 2 with different twist angles
Scanning transmission electron microscopy (STEM) imaging for twisted bilayer WSe 2 with h -BN encapsulation revealed a reconstructed moiré lattice below a crossover twist angle of ∼4° and a rigid moiré lattice above this angle.
- 27 June 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (30) , 14358-14365
Crossover between rigid and reconstructed moiré lattice in h -BN-encapsulated twisted bilayer WSe 2 with different twist angles
Scanning transmission electron microscopy (STEM) imaging for twisted bilayer WSe 2 with h -BN encapsulation revealed a reconstructed moiré lattice below a crossover twist angle of ∼4° and a rigid moiré lattice above this angle.
- Open Access
- 26 December 2023
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 5 (4) , 043292
Polarity-dependent twist-controlled resonant tunneling device based on few-layerFew-layer (FL) transition metal dichalcogenides have been found to exhibit discrete subbands, called van der Waals quantum well (vdWQW) states, resulting from out-of-plane quantum confinement. In this study, we reveal the twisted-resonant tunneling characteristics of a vdWQW device using a three-layer (3L) -BN/3L- junction with different twist angles between the two 3L flakes. Using an ambipolar graphene contact to , two primary vdWQW states of 3L located in the conduction band (CB) and valence band (VB) were investigated. We found that while the current peak positions due to the electron resonant tunneling between the CB-QW states significantly change with having a periodicity of , the hole resonant tunneling between the VB-QW states exhibits no dependence; these are due to different angular dispersions of two vdWQWs. The results highlight the different twistronic properties of CB and VB vdWQWs in FL .- 26 December 2023
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 5 (4) , 043292
Open AccessPolarity-dependent twist-controlled resonant tunneling device based on few-layerFew-layer (FL) transition metal dichalcogenides have been found to exhibit discrete subbands, called van der Waals quantum well (vdWQW) states, resulting from out-of-plane quantum confinement. In this study, we reveal the twisted-resonant tunneling characteristics of a vdWQW device using a three-layer (3L) -BN/3L- junction with different twist angles between the two 3L flakes. Using an ambipolar graphene contact to , two primary vdWQW states of 3L located in the conduction band (CB) and valence band (VB) were investigated. We found that while the current peak positions due to the electron resonant tunneling between the CB-QW states significantly change with having a periodicity of , the hole resonant tunneling between the VB-QW states exhibits no dependence; these are due to different angular dispersions of two vdWQWs. The results highlight the different twistronic properties of CB and VB vdWQWs in FL .