GGGrigorii Gridin

Grigorii Gridin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Grigorii Gridin has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Features of seismicity triggered by ripple-fired explosions at the Korobkovskoye iron ore deposit

    by Aleksey Ostapchuk, Kseniya Morozova, Alina Besedina, Grigorii Gridin, Antonina Grygoryeva, Dmitry Pavlov

    Intensification of mining activities often lead to nucleation of strong earthquakes and fault-slip bursts in areas that were previously thought to be aseismic or of low seismicity. Triggering strong seismic events associates with slips on existing tectonic faults and large fractures, whose structures essentially alter along strike. This work analyzes parameters of mine seismicity at the Korobkovskoye iron ore deposit, within which the large North-Eastern fault is localized. The goal of this analysis is to assess the probability of triggering strong seismic events at the fault segments with different structures of the core. The technique of ripple-fired blasting and horizon mining are employed in developing the deposit. This provokes weak seismic activity within the mine field. When explosions are hold in host rock, seismic events localize within the blasted chamber. The magnitude statistics displays distribution that obeys a power law, and the scaling exponent -value, as a rule, is less than 2. When explosions are hold in the vicinity of the fault, seismic events localize along its trace, and the -value, as a rule, exceeds 2. The main feature of seismicity at the Korobkovskoye iron ore deposit is that the induced events are of low radiative efficiency of 8,9 × 10−9–4,9 × 10−7 J/(N·m), which corresponds to “slow earthquakes”. The core of the North-Eastern fault contains mainly velocity-strengthening rocks, causing initiation of slow slip events. It is this circumstance that probably determines initiation of slow events. Linking the data of seismic monitoring and the structural and rheological properties of materials that compose the fault core allows to suggest that within the mine field in the vicinity of the North-Eastern fault the accumulated deformations can release mainly via slow and aseismic slips.


  • Open Access

    REGULARITIES OF INITIATING DYNAMIC MOVEMENTS ALONG FAULTS CONTAINING CONTACT PATCHES. LABORATORY EXPERIMENT

    by Г. А. Гридин, А. А. Остапчук

    В настоящей работе рассмотрены закономерности сдвигового деформирования модельных разломов, содержащих контактные пятна различного вещественного состава. В качестве геоматериала, слагающего контактные пятна, были использованы измельченные образцы кварцитов и амфиболитов, отобранных на эксгумированных на дневную поверхность сейсмогенном и асейсмичном участках Приморского разлома Байкальской рифтовой зоны. Показано, что вещественный состав не влияет на закономерности накопления деформаций. В ходе увеличения сдвигового усилия в окрестности контактного пятна формируется «запертая» область, где фиксируетсядефицит деформаций. При реализации накопленныхнамодельномразломедеформаций вещественный состав имеет радикальное влияние. На кварц содержащих контактных пятнах со свойством скоростного разупрочнения реализуются динамические подвижки, которые сопровождаются излучением колебаний в диапазоне частот от 1 Гц до 80 кГц. В то же время при подвижке по амфибол содержащему контактному пятну со свойством скоростного упрочнения регистрируются только колебания в диапазоне частот 20-80 кГц, колебания с частотой менее 10 кГц не выявлены. Показано, что вследствие динамических подвижек происходят микроструктурные изменения геоматериала контактных пятен. В плоскости скольжения происходит неравномерное истираниеминералов, атакжевторичноеминералообразование. Врезультатебыстрыхдинамических подвижек по кварц содержащим контактным пятнам фиксируются высокотемпературные фазовые превращения кварца в тридимит при температуре ~ 700° C. This paper considers regularities of shearing model faults containing contact patches of different composition. Samples of quartzites and amphibolites collected at the Primorsky Fault of the Baikal Rift Zone, in its seismogenic and aseismic segments exhumed to the day surface, were pounded and used to fill the contact patches. It is shown that the material composing the patches does not affect on regularities of accumulating deformation. During the increase of shear force, a «locked» region emerges nearby the contact patch, where a deficit of deformation is observed. The material composition has a critical effect on the release of the accumulated deformations along the model fault. Dynamic ruptures are realized on quartz-containing contact patches with velocity-weakening behaviour. They are accompanied by the emission of oscillations in the frequency range of 1 Hz to 80 kHz. Ruptures in amphibole-containing contact patches with velocity-strengthening behaviour produce oscillations in the frequency range of 20- 80 kHz, oscillations with frequencies less than 10 kHz were not detected. It is shown that dynamic movements lead to microstructural changes in the geomaterial composing the contact patch. Minerals are abraded unevenly in the slip plane, the abrasion is accompanied by secondary mineral formation. High- temperature phase transformations of quartz into tridymite are detected at a temperature of ~ 700°C as a result of fast dynamic movements along quartz-containing contact patches.


  • Open Access

    ON THE STRUCTURAL AND MATERIAL HETEROGENEITY OF THE ZONE OF TECTONIC DISCONTINUITY LOCALIZATIONS

    by Г. А. Гридин, А. В. Григорьева, А. А. Остапчук, А. В. Черемных, А. А. Бобров

    В работе представлены результаты комплексного исследования эксгумированного участка тектонического разлома в районе Бугульдейского дизъюнктивного узла Байкальской рифтовой зоны. В рамках исследований определен химический состав 81 образца, отобранного с дневной поверхности, и выполнено их петрографическое описание. Применение алгоритма иерархической кластеризации при анализе химического состава образцов позволило выделить три группы, характеризующие крылья разлома, сложенные амфиболитовым и гранитным массивами, а также ядро разлома, характеризующееся привносом железисто-карбонатного материала. Петрографическое описание образцов подтверждает корректность выделения трех групп и позволяет, дополнительно, выявить динамометаморфические преобразования минералов, локализованных в ядре разлома и обусловленных инициированием высокоамплитудных сейсмогенерирующих подвижек. В ядре разлома массив был подвержен сильнейшим катакластическим деформациям с локализованным фрикционным нагревом геоматериала до 1000° C. На основе электротомографических измерений построен геоэлектрический разрез вкрест простирания разлома. На геоэлектрическом разрезе выделяется проводящая зона шириной 20 м, которая пространственно согласуется с зоной ядра разлома. На основе комплексного исследования эксгумированного сегмента были определены элементы его залегания (азимут простирания – 70°, угол падения – 60°), которые указывают, что эксгумированный сегмент приурочен к зоне Морского разлома. The paper presents the results of a complex investigation on an exhumed section of a tectonic fault being a part of the Buguldeisky disjunctive node of the Baykal Rift Zone. The chemical composition of 81 samples taken at the day surface was determined, and their petrographic description was performed. Applying the hierarchical clustering algorithm in the analysis of chemical composition of the samples made it possible to distinguish three groups that characterize fault walls, composed of amphibolite and granite. Also the core of the fault was detected, which is characterized by an insertion of a ferruginous- carbonate material. The petrographic description of the samples confirms the correctness of identifying three groups and allows, additionally, to reveal the dynamometamorphic transformations of minerals localized in the fault core which were produced by high-amplitude seismogenic slips. In the fault core, the rock was subjected to strongest cataclastic deformations with a local frictional heating up to 1000° C. A geoelectric section was constructed across the strike of the fault based on the electrical tomographic measurements. A conductive zone 20 m wide is distinguished in the geoelectric section, which is spatially consistent with the zone of the fault core. Based on a comprehensive study of the exhumed segment, the elements of its occurrence were determined (strike azimuth is 70°, dip angle is 60°), which indicates that the exhumed segment belongs to the Morsky fault.