Arman Rustembayev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arman Rustembayev has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
Евгений Золотухин
Костанайский региональный университет имени Ахмет Байтұрсынұлы
6 shared publications- Maksat Amantayev
Department of Agrarian Machinery and Transportation, Akhmet Baitursynuly Kostanay Regional University, Kostanay 110000, Kazakhstan
5 shared publications - Nurbol Kakabayev
НАО «Кокшетауский университет имени Ш. Уалиханова
3 shared publications - Yevgeniy Zolotukhin
Akhmet Baitursynuly Kostanay Regional University NLC
3 shared publications - Ерлан Сайдалин
Казахский агротехнический исследовательский университет имени С.Сейфуллина
3 shared publications - Жасулан Мустафин
Казахский агротехнический исследовательский университет имени С.Сейфуллина
3 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by L. N. Gumilyov Eurasian National University in Eurasian Journal of Applied Engineering and Technology (EJAET)
- Vol. 155 (2) , 173-189
Improving the performance of a vehicle's internal combustion engine using various types of additives
Modern requirements for internal combustion engines (ICE) imply not only high power and efficiency indicators, but also compliance with environmental standards for the level of emissions of harmful substances. One of the promising areas for improving the performance characteristics of ICE is the use of fuel additives that can improve the quality of fuel combustion, reduce the formation of deposits and reduce the wear of engine components. This paper examines the effect of various types of fuel additives on the operation of a gasoline engine with direct injection. The study was conducted using both laboratory and numerical modeling methods. The engine operating parameters were analyzed using fuel without additives, as well as with additives in various concentrations. The following parameters were evaluated: specific fuel consumption, temperature and dynamic operating modes, combustion stability, content of nitrogen oxides (NOx), hydrocarbons (CH) and carbon monoxide (CO) in exhaust gase. The results showed that certain additive formulations help to increase the completeness of fuel mixture combustion, reduce exhaust toxicity, and increase engine life by improving the lubricating and cleaning properties of the fuel. Based on the data obtained, recommendations were developed for the optimal use of additives depending on engine operating conditions. The findings presented may be useful for both automakers and private users seeking to improve the efficiency and environmental friendliness of their vehicles.
- 1 July 2026
- Published by L. N. Gumilyov Eurasian National University in Eurasian Journal of Applied Engineering and Technology (EJAET)
- Vol. 155 (2) , 173-189
Open AccessImproving the performance of a vehicle's internal combustion engine using various types of additives
Modern requirements for internal combustion engines (ICE) imply not only high power and efficiency indicators, but also compliance with environmental standards for the level of emissions of harmful substances. One of the promising areas for improving the performance characteristics of ICE is the use of fuel additives that can improve the quality of fuel combustion, reduce the formation of deposits and reduce the wear of engine components. This paper examines the effect of various types of fuel additives on the operation of a gasoline engine with direct injection. The study was conducted using both laboratory and numerical modeling methods. The engine operating parameters were analyzed using fuel without additives, as well as with additives in various concentrations. The following parameters were evaluated: specific fuel consumption, temperature and dynamic operating modes, combustion stability, content of nitrogen oxides (NOx), hydrocarbons (CH) and carbon monoxide (CO) in exhaust gase. The results showed that certain additive formulations help to increase the completeness of fuel mixture combustion, reduce exhaust toxicity, and increase engine life by improving the lubricating and cleaning properties of the fuel. Based on the data obtained, recommendations were developed for the optimal use of additives depending on engine operating conditions. The findings presented may be useful for both automakers and private users seeking to improve the efficiency and environmental friendliness of their vehicles.
- Open Access
- 1 January 2026
- Published by Non-profit limited company - Akhmet Baitursynuly Kostanay Regional University in 3i: intellect, idea, innovation - интеллект, идея, инновация
- Vol. 3 (1) , 204-213
OPTIMIZATION OF TURBOCHARGER BLADE ANGLES FOR IMPROVING THE EFFICIENCY OF DIESEL ENGINES IN AGRICULTURAL MACHINERY
This study is aimed at improving the operational efficiency of the MMZ D-245.9 diesel engine by enhancing its turbocharging system. The study focuses on the TKR 6.1 centrifugal compressor, which has been modified to incorporate an adjustable inlet guide vane assembly developed based on Patent RU2293220C2. The research employs mathematical modeling, thermodynamic analysis, and CFD simulation methods to evaluate the effect of preliminary air swirl on the flow structure in the impeller blade passages and on the energy exchange parameters in the flow path. It has been established that the standard compressor geometry under nominal operating conditions is characterized by a critical angle of attack of +12.85°, which causes flow separation, increased hydraulic losses, and a decrease in adiabatic efficiency. As a result of parametric optimization, a rational blade setting angle of the inlet guide vane apparatus (45°) was determined, ensuring shockless flow entry, stabilization of the flow structure, and an increase in adiabatic efficiency by 16.1%. Thermodynamic calculations showed a decrease in charge air temperature by 16.7 K and an increase in its density by 0.65%. Comprehensive aerodynamic improvement of the unit provides a 5.4% increase in the effective engine power while simultaneously reducing specific fuel consumption by 2.4%, confirming the scientific novelty and practical significance of the research for transport and agricultural machinery operating under various climatic conditions.
- 1 January 2026
- Published by Non-profit limited company - Akhmet Baitursynuly Kostanay Regional University in 3i: intellect, idea, innovation - интеллект, идея, инновация
- Vol. 3 (1) , 204-213
Open AccessOPTIMIZATION OF TURBOCHARGER BLADE ANGLES FOR IMPROVING THE EFFICIENCY OF DIESEL ENGINES IN AGRICULTURAL MACHINERY
This study is aimed at improving the operational efficiency of the MMZ D-245.9 diesel engine by enhancing its turbocharging system. The study focuses on the TKR 6.1 centrifugal compressor, which has been modified to incorporate an adjustable inlet guide vane assembly developed based on Patent RU2293220C2. The research employs mathematical modeling, thermodynamic analysis, and CFD simulation methods to evaluate the effect of preliminary air swirl on the flow structure in the impeller blade passages and on the energy exchange parameters in the flow path. It has been established that the standard compressor geometry under nominal operating conditions is characterized by a critical angle of attack of +12.85°, which causes flow separation, increased hydraulic losses, and a decrease in adiabatic efficiency. As a result of parametric optimization, a rational blade setting angle of the inlet guide vane apparatus (45°) was determined, ensuring shockless flow entry, stabilization of the flow structure, and an increase in adiabatic efficiency by 16.1%. Thermodynamic calculations showed a decrease in charge air temperature by 16.7 K and an increase in its density by 0.65%. Comprehensive aerodynamic improvement of the unit provides a 5.4% increase in the effective engine power while simultaneously reducing specific fuel consumption by 2.4%, confirming the scientific novelty and practical significance of the research for transport and agricultural machinery operating under various climatic conditions.
- Open Access
- 30 September 2025
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 80 (3) , 3-11
MODELING THE NUMERICAL DYNAMICS OF MIGRATORY LOCUST PESTS IN VARIOUS AGRO-CLIMATIC ZONES OF KAZAKHSTAN USING MACHINE LEARNING METHODS AND CLIMATIC PREDICTORS
Mass locust invasions pose a significant threat to agricultural productivity in Kazakhstan. Locust attacks pose a serious threat to Kazakhstan's agricultural productivity. In order to determine the fundamental predictors of the number of locusts in the Central, Eastern and northern parts of Kazakhstan for each agro-climatic zone, on the basis of machine learning algorithms, perennial historical data on the dynamics of the number of studied pests in the period 2003-2024, depending on the influence of weather, climatic and edaphic (soil) factors, were processed and analyzed. Agroclimatic zones with different characteristics were considered. Such a wide coverage of the regions made it possible to take into account thediversity of conditions and identify the main factors (main predictors) that affect the number of phytophages studied. In this study, using field data from 2003 to 2024 and regional climate variables from ERA5 obtained via Google Earth Engine, we applied machine learning models to forecast the population dynamics of migratory locusts.We employed CatBoost, SARIMAX, and LSTM algorithms, comparing their performance on the input datasets. The LSTM model achieved the highest prediction accuracy (MAE = 0.36, RMSE = 0.59), effectively capturing temporal dependencies. Our results emphasize the importance of incorporating climatic factors such as soil moisture, temperature, and precipitation in forecasting models. These findings contribute to the development of targeted pest control strategies tailored to specific agroclimatic zones and enhance forecasting and monitoring methods based on GIS and computational modeling
- 30 September 2025
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 80 (3) , 3-11
Open AccessMODELING THE NUMERICAL DYNAMICS OF MIGRATORY LOCUST PESTS IN VARIOUS AGRO-CLIMATIC ZONES OF KAZAKHSTAN USING MACHINE LEARNING METHODS AND CLIMATIC PREDICTORS
Mass locust invasions pose a significant threat to agricultural productivity in Kazakhstan. Locust attacks pose a serious threat to Kazakhstan's agricultural productivity. In order to determine the fundamental predictors of the number of locusts in the Central, Eastern and northern parts of Kazakhstan for each agro-climatic zone, on the basis of machine learning algorithms, perennial historical data on the dynamics of the number of studied pests in the period 2003-2024, depending on the influence of weather, climatic and edaphic (soil) factors, were processed and analyzed. Agroclimatic zones with different characteristics were considered. Such a wide coverage of the regions made it possible to take into account thediversity of conditions and identify the main factors (main predictors) that affect the number of phytophages studied. In this study, using field data from 2003 to 2024 and regional climate variables from ERA5 obtained via Google Earth Engine, we applied machine learning models to forecast the population dynamics of migratory locusts.We employed CatBoost, SARIMAX, and LSTM algorithms, comparing their performance on the input datasets. The LSTM model achieved the highest prediction accuracy (MAE = 0.36, RMSE = 0.59), effectively capturing temporal dependencies. Our results emphasize the importance of incorporating climatic factors such as soil moisture, temperature, and precipitation in forecasting models. These findings contribute to the development of targeted pest control strategies tailored to specific agroclimatic zones and enhance forecasting and monitoring methods based on GIS and computational modeling
- Open Access
- 30 June 2025
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 79 (2) , 66-75
ASSESSMENT OF THE IMPACT OF THE LAYOUT SCHEME OF SOWING COMPLEXES ON PRODUCTIVITY
The article examines the influence of the layout scheme of sowing complexes on their productivity and soil condition. The layout of the unit affects parameters such as weight, soil pressure and energy indicators, which directly affects the efficiency of using agricultural machinery. The authors study three options for the layout of a machine-tractor unit: a tractor with a hopper and a tillage tool in different configurations. The study found that placing the hopper in front of the tractor reduces the traction resistance of the complex, thereby improving its energy efficiency. Different layout schemes have different effects on soil density and hardness, which affects crop yields. The main conclusion of the study is that the optimal layout reduces the anthropogenic impact on the soil, while providing higher yields. As a result of the analysis, rational schemes are proposed that can help farmers maintain the soil structure and increase field productivity. This research is useful for developing more efficient layouts of agricultural aggregates, allowing for sustainable farming and preserving soil fertility for a long time. Also, the proposed solutions can reduce the cost of equipment and its maintenance
- 30 June 2025
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 79 (2) , 66-75
Open AccessASSESSMENT OF THE IMPACT OF THE LAYOUT SCHEME OF SOWING COMPLEXES ON PRODUCTIVITY
The article examines the influence of the layout scheme of sowing complexes on their productivity and soil condition. The layout of the unit affects parameters such as weight, soil pressure and energy indicators, which directly affects the efficiency of using agricultural machinery. The authors study three options for the layout of a machine-tractor unit: a tractor with a hopper and a tillage tool in different configurations. The study found that placing the hopper in front of the tractor reduces the traction resistance of the complex, thereby improving its energy efficiency. Different layout schemes have different effects on soil density and hardness, which affects crop yields. The main conclusion of the study is that the optimal layout reduces the anthropogenic impact on the soil, while providing higher yields. As a result of the analysis, rational schemes are proposed that can help farmers maintain the soil structure and increase field productivity. This research is useful for developing more efficient layouts of agricultural aggregates, allowing for sustainable farming and preserving soil fertility for a long time. Also, the proposed solutions can reduce the cost of equipment and its maintenance
- Open Access
- 15 May 2025
- Published by Walter de Gruyter GmbH in Acta Technologica Agriculturae
- Vol. 28 (2) , 117-123
Research Tests of Drill Seeder with Control and Monitoring Unit of Seed Metering Device for Differentiated Dosing of Seeds and Mineral Fertilisers in Precision Agriculture
Precision agriculture based on differentiated dosing of seeds and mineral fertilisers allows for enhancing soil fertility while simultaneously increasing crop yields and reducing production costs. The purpose of study is to increase the efficiency of differentiated dosing of seeds and mineral fertilisers. By determining the intra-field variability of nutrient elements, it has been revealed that the content of mobile nitrogen (N), phosphorus (P 2 O 5 ), and carbon (CO 2 ) in the arable layer varies widely within one field. Based on the data obtained, the maps of the distribution of nutrients were constructed. The research tests of the drill seeder with the control and monitoring unit of seed metering device were conducted in this field conditions, and the results were processed using the method of variational statistics. The analysis of the assessment of agrotechnical performance of the seeder shows that the values of the unevenness of sowing between devices and the instability of total sowing (in the coefficients of variations, %) meet agrotechnical requirements. It was revealed that the seeder allows for smooth adjustment, reduces time, and increases the range of seeding rate and dosing of seeding material. The obtained data confirm the effectiveness of the seeder for differentiated dosing of seeding material in precision agriculture.
- 15 May 2025
- Published by Walter de Gruyter GmbH in Acta Technologica Agriculturae
- Vol. 28 (2) , 117-123
Open AccessResearch Tests of Drill Seeder with Control and Monitoring Unit of Seed Metering Device for Differentiated Dosing of Seeds and Mineral Fertilisers in Precision Agriculture
Precision agriculture based on differentiated dosing of seeds and mineral fertilisers allows for enhancing soil fertility while simultaneously increasing crop yields and reducing production costs. The purpose of study is to increase the efficiency of differentiated dosing of seeds and mineral fertilisers. By determining the intra-field variability of nutrient elements, it has been revealed that the content of mobile nitrogen (N), phosphorus (P 2 O 5 ), and carbon (CO 2 ) in the arable layer varies widely within one field. Based on the data obtained, the maps of the distribution of nutrients were constructed. The research tests of the drill seeder with the control and monitoring unit of seed metering device were conducted in this field conditions, and the results were processed using the method of variational statistics. The analysis of the assessment of agrotechnical performance of the seeder shows that the values of the unevenness of sowing between devices and the instability of total sowing (in the coefficients of variations, %) meet agrotechnical requirements. It was revealed that the seeder allows for smooth adjustment, reduces time, and increases the range of seeding rate and dosing of seeding material. The obtained data confirm the effectiveness of the seeder for differentiated dosing of seeding material in precision agriculture.
- Open Access
- 30 March 2025
- Published by Kazakh National Agrarian University in Izdenister natigeler
- No. 1 (105),p. 371-381
ЖАНШЫҒЫШ ҰСАҚТАҒЫШТЫН ТІСТІ БАРАБАННЫҢ ПАРАМЕТРЛЕРІН НЕГІЗДЕУ
Мақалада жаншығыш ұсақтағыштың жұмыс процесін эксперименттік-теориялық зерттеу нәтижелері келтірілген. Бұл жұмыс 2021-2024 жылдар аралығында С. Сейфуллин атындағы Қазақ агротехникалық зерттеу университетінің "Аграрлық техника және технология" кафедрасының базасында орындалды. Барлық дәнді-дақылдарды жаншып ұсақтау үрдісінде ұсақтағышқа орнатылған тісті барабандардардың диаметріне, айналу жылдамдығы және екі барабан арасындағы саңылауды зерттеу. Ұсақтау үрдісі кезінде дәнді дақылдарға әсер ететін және тісті барабанның геометриялық көрсеткіштері анықталынған. Тісті барандармен жаншып ұсақтау кезінде энергия шығыны төмендейтіні анықталынды. Тeopиялық зepттeу нәтижeciндe ұсақтағыштың өнімділігі және жылдамдығы анықталынды. Зерттеу кезінде қарама-қарсы айналатын екі тicтi бapaбaндардың жылдамдығы біреуі бaяу және екінші тeз aйнaлaуы кepeк eкeнi байқалды. Сонымен қоса, бapaбaн тicтepiнiң дәндepгe кipуiн жәнe бapaбaн ұзындығы бoйымeн дәндepдiң opнaлacуын қapacтыpa oтыpып, жaншып ұcaқтaуғa қaжeт қуaтты aнықтaлынған, бұл инжeнepлiк тeңдeу үшiн өpнeктiң дәлдiгi жeткiлiктi eкeнiн көpceттi. Ұcaқтaғыш apaлықтapының әpтүpлi aйнaлу жиiлiгiндe ұcaқтaу үpдiciнe кeтeтiн қуaты, ocы зepттeу кeзiндe aнықтaдық, oғaн қoca, тicтi бapaбaндapдың aйнaлу жиiлiктepiндe ұcaқтaу үpдiciнe жұмcaлaтын қуaттың тeopиялық мәндepi aнықтaлынды. Қуaттың бұл тeopиялық мәндepiн, зepттeу бapыcындa aнықтaлғaн тәжipибeлiк мәндepiмeн caлыcтыpу жүpгiзiлдi. Ұcaқтaғыштың кoнcтpуктивтi-тexнoлoгияcын нeгiздeп жacaу кeзiндe, тeopиялық зepттeулepдiң нәтижeciнe cәйкec тicтi бapaбaндapдың диaмeтpi тaңдaлды.
- 30 March 2025
- Published by Kazakh National Agrarian University in Izdenister natigeler
- No. 1 (105),p. 371-381
Open AccessЖАНШЫҒЫШ ҰСАҚТАҒЫШТЫН ТІСТІ БАРАБАННЫҢ ПАРАМЕТРЛЕРІН НЕГІЗДЕУ
Мақалада жаншығыш ұсақтағыштың жұмыс процесін эксперименттік-теориялық зерттеу нәтижелері келтірілген. Бұл жұмыс 2021-2024 жылдар аралығында С. Сейфуллин атындағы Қазақ агротехникалық зерттеу университетінің "Аграрлық техника және технология" кафедрасының базасында орындалды. Барлық дәнді-дақылдарды жаншып ұсақтау үрдісінде ұсақтағышқа орнатылған тісті барабандардардың диаметріне, айналу жылдамдығы және екі барабан арасындағы саңылауды зерттеу. Ұсақтау үрдісі кезінде дәнді дақылдарға әсер ететін және тісті барабанның геометриялық көрсеткіштері анықталынған. Тісті барандармен жаншып ұсақтау кезінде энергия шығыны төмендейтіні анықталынды. Тeopиялық зepттeу нәтижeciндe ұсақтағыштың өнімділігі және жылдамдығы анықталынды. Зерттеу кезінде қарама-қарсы айналатын екі тicтi бapaбaндардың жылдамдығы біреуі бaяу және екінші тeз aйнaлaуы кepeк eкeнi байқалды. Сонымен қоса, бapaбaн тicтepiнiң дәндepгe кipуiн жәнe бapaбaн ұзындығы бoйымeн дәндepдiң opнaлacуын қapacтыpa oтыpып, жaншып ұcaқтaуғa қaжeт қуaтты aнықтaлынған, бұл инжeнepлiк тeңдeу үшiн өpнeктiң дәлдiгi жeткiлiктi eкeнiн көpceттi. Ұcaқтaғыш apaлықтapының әpтүpлi aйнaлу жиiлiгiндe ұcaқтaу үpдiciнe кeтeтiн қуaты, ocы зepттeу кeзiндe aнықтaдық, oғaн қoca, тicтi бapaбaндapдың aйнaлу жиiлiктepiндe ұcaқтaу үpдiciнe жұмcaлaтын қуaттың тeopиялық мәндepi aнықтaлынды. Қуaттың бұл тeopиялық мәндepiн, зepттeу бapыcындa aнықтaлғaн тәжipибeлiк мәндepiмeн caлыcтыpу жүpгiзiлдi. Ұcaқтaғыштың кoнcтpуктивтi-тexнoлoгияcын нeгiздeп жacaу кeзiндe, тeopиялық зepттeулepдiң нәтижeciнe cәйкec тicтi бapaбaндapдың диaмeтpi тaңдaлды.
- Open Access
- 1 January 2025
- Published by Non-profit limited company - Akhmet Baitursynuly Kostanay Regional University in 3i: intellect, idea, innovation - интеллект, идея, инновация
- Vol. 4 (1) , 104-115
IMPROVING THE EFFICIENCY OF AUTO TRACTOR DIESEL ENGINES THROUGH THE USE OF ALTERNATIVE FUEL MIXTURES
The research purpose is to increase in the efficiency of automotive diesel engines operating on alternative fuels, to develop approaches for adapting engine design and operating modes, and to justify technical solutions for improving fuel delivery systems. The article analyzes combustion parameters, features of fuel-air mixture formation, thermal regimes, and component wear under the use of different fuel compositions. The research established the influence of viscosity, cetane number, oxygen content, and impurities on В-243 engine operation stability, pollutant emissions, and the service life of components. The research results substantiated recommendations on the application of specific types of fuel mixtures aimed at improving thermal efficiency, reducing specific fuel consumption, and lowering harmful emissions. In addition, a schematic model of a modified fuel supply system capable of automatically adapting to changes in fuel composition is proposed. Experimental data, including comparative performance indicators of standard diesel fuel and alternative mixtures, serve as a basis for assessing the effectiveness of the proposed solutions and confirm their technical and economic viability. Thus, research results can be implemented on the modernization of automotive diesel engines in the context of a transition to a multifactorial fuel base, ensuring energy sustainability and reducing the negative environmental impact.
- 1 January 2025
- Published by Non-profit limited company - Akhmet Baitursynuly Kostanay Regional University in 3i: intellect, idea, innovation - интеллект, идея, инновация
- Vol. 4 (1) , 104-115
Open AccessIMPROVING THE EFFICIENCY OF AUTO TRACTOR DIESEL ENGINES THROUGH THE USE OF ALTERNATIVE FUEL MIXTURES
The research purpose is to increase in the efficiency of automotive diesel engines operating on alternative fuels, to develop approaches for adapting engine design and operating modes, and to justify technical solutions for improving fuel delivery systems. The article analyzes combustion parameters, features of fuel-air mixture formation, thermal regimes, and component wear under the use of different fuel compositions. The research established the influence of viscosity, cetane number, oxygen content, and impurities on В-243 engine operation stability, pollutant emissions, and the service life of components. The research results substantiated recommendations on the application of specific types of fuel mixtures aimed at improving thermal efficiency, reducing specific fuel consumption, and lowering harmful emissions. In addition, a schematic model of a modified fuel supply system capable of automatically adapting to changes in fuel composition is proposed. Experimental data, including comparative performance indicators of standard diesel fuel and alternative mixtures, serve as a basis for assessing the effectiveness of the proposed solutions and confirm their technical and economic viability. Thus, research results can be implemented on the modernization of automotive diesel engines in the context of a transition to a multifactorial fuel base, ensuring energy sustainability and reducing the negative environmental impact.
- Open Access
- 1 January 2025
- Published by Non-profit limited company - Akhmet Baitursynuly Kostanay Regional University in 3i: intellect, idea, innovation - интеллект, идея, инновация
- Vol. 1 (1) , 103-109
IMPROVEMENT OF THE SEEDER PACKING WHEELS FOR SUBSOIL-BROADCAST SEEDING OF GRAIN CROPS
One of the ways to increase the yield of grain crops in the Northern Kazakhstan within the modern cultivation technologies is the use of subsoil-broadcast sowing. For doing so, the quality of compaction and rolling of the top seed soil layer plays an important role in the formation of the future harvest. In this regard, this article is devoted to the study, improvement and development of new operating tools of the seeder packing wheels for subsoil-broadcast sowing. The purpose of the study is to increase the efficiency of subsoil-broadcast sowing of grain crops. Objectives: development of a new improved packing wheels and carry out a comparative analysis of the operation of seeders and their packing wheels. A new improved two-row wedge typed packing (compacting) wheels are proposed. A comparative analysis of the operation of stubble seeders and their operating tools of packing wheels, widely used for subsoil-broadcast sowing in the Northern Kazakhstan within the modern cultivation technologies of grain crops, was carried out. The technological processes of packing and compaction of the top seed soil layer with this sowing method was considered and the main advantages of existing serial operating tools and disadvantages of proposed operating tools of improved packing wheels were identified. The use of the proposed packing wheels during grain crops sowing contributes to the emergence of even stands due to the creation of favorable conditions for the growth and development of plants, which, consequently, will have a positive effect on increasing the yield.
- 1 January 2025
- Published by Non-profit limited company - Akhmet Baitursynuly Kostanay Regional University in 3i: intellect, idea, innovation - интеллект, идея, инновация
- Vol. 1 (1) , 103-109
Open AccessIMPROVEMENT OF THE SEEDER PACKING WHEELS FOR SUBSOIL-BROADCAST SEEDING OF GRAIN CROPS
One of the ways to increase the yield of grain crops in the Northern Kazakhstan within the modern cultivation technologies is the use of subsoil-broadcast sowing. For doing so, the quality of compaction and rolling of the top seed soil layer plays an important role in the formation of the future harvest. In this regard, this article is devoted to the study, improvement and development of new operating tools of the seeder packing wheels for subsoil-broadcast sowing. The purpose of the study is to increase the efficiency of subsoil-broadcast sowing of grain crops. Objectives: development of a new improved packing wheels and carry out a comparative analysis of the operation of seeders and their packing wheels. A new improved two-row wedge typed packing (compacting) wheels are proposed. A comparative analysis of the operation of stubble seeders and their operating tools of packing wheels, widely used for subsoil-broadcast sowing in the Northern Kazakhstan within the modern cultivation technologies of grain crops, was carried out. The technological processes of packing and compaction of the top seed soil layer with this sowing method was considered and the main advantages of existing serial operating tools and disadvantages of proposed operating tools of improved packing wheels were identified. The use of the proposed packing wheels during grain crops sowing contributes to the emergence of even stands due to the creation of favorable conditions for the growth and development of plants, which, consequently, will have a positive effect on increasing the yield.
- Open Access
- 25 December 2024
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 2 (4 (77)) , 227-238
ТОПЫРАҚТЫ ӨҢДЕУ КЕЗІНДЕГІ ЖҰМЫС ОРГАНЫНЫҢ ТАРТУ КҮШІН ТЕОРИТИКАЛЫҚ НЕГІЗДЕУ
Минералды тыңайтқыштарды қолданудың қабатты технологиясымен машинаны практикалық іске асырудың құнын төмендетуге болатындығы және оның құрылымдық шешімін жеңілдетуге болатындығы анықталды. Минералды тыңайтқыштарды қабатты енгізу үшін әзірленген қопсытқыш-тыңайтқыштың анықтаушы элементтерінің бірі – жұмыс органының қозғалуы үшін қажет тартылыс күші көптеген факторларға байланысты, оларға топырақ сферасының физикалық-механикалық сипаттамалары, жұмыс органының құрылымдық сипаттамалары және топырақты өңдеудің жұмыс процесінің технологиялық сипаттамалары жатады. Осыған байланысты, әзірленіп жатқан жұмыс органының құрылымдық параметрлері және оның жұмысының технологиялық параметрлері ретінде физика-механикалық қасиеттер арасындағы өзара байланысты орнату мақсатында теориялық зерттеулер жүргізілді. Теориялық зерттеулер нәтижесінде барлық негізгі конструктивті және технологиялық параметрлерді байланыстыратын өрнек алынды: жұмыс органының тарту күші лемехтің ұзындығына, өңдеу тереңдігіне және табан мен ерітіндінің кесу бұрыштарына және трансляциялық жылдамдықтың квадратына тура пропорционал. Есептеу көрсеткендей, қабылданған технологиялық және құрылымдық параметрлердегі жұмыс органының тарту күші P = 124.3 кг/с құрайды, бұл белгілі бір нәтижеге толық сәйкес келеді. Зерттеудің келесі кезеңінде алынған нәтижелерді зертханалық эксперименттерде топырақ каналындағы тәжірибелі жұмыс органын сүйреп апару және тарту күшін динамометриялау арқылы тексеру қажет.
- 25 December 2024
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 2 (4 (77)) , 227-238
Open AccessТОПЫРАҚТЫ ӨҢДЕУ КЕЗІНДЕГІ ЖҰМЫС ОРГАНЫНЫҢ ТАРТУ КҮШІН ТЕОРИТИКАЛЫҚ НЕГІЗДЕУ
Минералды тыңайтқыштарды қолданудың қабатты технологиясымен машинаны практикалық іске асырудың құнын төмендетуге болатындығы және оның құрылымдық шешімін жеңілдетуге болатындығы анықталды. Минералды тыңайтқыштарды қабатты енгізу үшін әзірленген қопсытқыш-тыңайтқыштың анықтаушы элементтерінің бірі – жұмыс органының қозғалуы үшін қажет тартылыс күші көптеген факторларға байланысты, оларға топырақ сферасының физикалық-механикалық сипаттамалары, жұмыс органының құрылымдық сипаттамалары және топырақты өңдеудің жұмыс процесінің технологиялық сипаттамалары жатады. Осыған байланысты, әзірленіп жатқан жұмыс органының құрылымдық параметрлері және оның жұмысының технологиялық параметрлері ретінде физика-механикалық қасиеттер арасындағы өзара байланысты орнату мақсатында теориялық зерттеулер жүргізілді. Теориялық зерттеулер нәтижесінде барлық негізгі конструктивті және технологиялық параметрлерді байланыстыратын өрнек алынды: жұмыс органының тарту күші лемехтің ұзындығына, өңдеу тереңдігіне және табан мен ерітіндінің кесу бұрыштарына және трансляциялық жылдамдықтың квадратына тура пропорционал. Есептеу көрсеткендей, қабылданған технологиялық және құрылымдық параметрлердегі жұмыс органының тарту күші P = 124.3 кг/с құрайды, бұл белгілі бір нәтижеге толық сәйкес келеді. Зерттеудің келесі кезеңінде алынған нәтижелерді зертханалық эксперименттерде топырақ каналындағы тәжірибелі жұмыс органын сүйреп апару және тарту күшін динамометриялау арқылы тексеру қажет.
- Open Access
- 25 September 2024
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 2 (3(76)) , 204-213
Минералды тыңайтқыштарды сараланған деңгейде енгізуге арналған жалпақ тілгіш терең қопсытқыш-тыңайтқыш жұмысының эксперименттік зерттеулерінің нәтижелері
Топырақты қопсыту және минералды тыңайтқыштарды сараланған деңгейде енгізу процесін орындау үшін жалпақ тілгіш терең қопсытқыш-тыңайтқыштың физикалық моделі әзірленді және жасалды. Эксперименттік жұмыс органының тарту күшін анықтау бойынша эксперименттік зерттеулер топырақ каналында зертханалық жағдайда жүргізілді. Алынған мәліметтер талданып, математикалық статистика әдісімен өңделді, тартылыс күшінің өзгеруі графигі жасалды және эксперименттік үлгінің көрсеткіштері сериялықтың көрсеткіштерімен салыстырылды. Тәжірибелер басталғанға дейін топырақ каналында топырақ тереңдіктегі ылғалдылық бойынша дайындалды. Топырақтың ылғалдылығын анықтау үшін американдық құрылғы Т-350 Aquaterr қолданылды. Топырақтың тығыздығын анықтау үшін Wile маркалы финдік тығыздық өлшегіш (ASAE S313.3 стандарты) қолданылды. Эксперименттік зерттеулердің нәтижелері бойынша әзірленген және сериялық жұмыс органдарының тартылыс күштері алынды. Осылайша, топыраққа минералды тыңайтқыштарды сараланған деңгейде енгізу үшін эксперименттік жалпақ тілгіш-терең қопсытқыш-тыңайтқыштың қозғалыс процесін зерттей отырып, тарту күшінің оның қозғалу жылдамдығына аналитикалық тәуелділігі алынды. Теңдеуді талдау зерттелетін топырақ өңдеу жұмыс органының тарту күшінің қозғалыс жылдамдығына квадраттық тәуелділігін көрсетеді. Сонымен қатар, салыстырмалы талдау теориялық зерттеулер мен эксперименттік мәліметтердің нәтижелері жақын екенін көрсетті. Бұл зерттеу бағытының дұрыстығын көрсетеді.
- 25 September 2024
- Published by West Kazakhstan Agrarian Technical University named after Zhangir Khan in Ġylym ža̋ne bìlìm
- Vol. 2 (3(76)) , 204-213
Open AccessМинералды тыңайтқыштарды сараланған деңгейде енгізуге арналған жалпақ тілгіш терең қопсытқыш-тыңайтқыш жұмысының эксперименттік зерттеулерінің нәтижелері
Топырақты қопсыту және минералды тыңайтқыштарды сараланған деңгейде енгізу процесін орындау үшін жалпақ тілгіш терең қопсытқыш-тыңайтқыштың физикалық моделі әзірленді және жасалды. Эксперименттік жұмыс органының тарту күшін анықтау бойынша эксперименттік зерттеулер топырақ каналында зертханалық жағдайда жүргізілді. Алынған мәліметтер талданып, математикалық статистика әдісімен өңделді, тартылыс күшінің өзгеруі графигі жасалды және эксперименттік үлгінің көрсеткіштері сериялықтың көрсеткіштерімен салыстырылды. Тәжірибелер басталғанға дейін топырақ каналында топырақ тереңдіктегі ылғалдылық бойынша дайындалды. Топырақтың ылғалдылығын анықтау үшін американдық құрылғы Т-350 Aquaterr қолданылды. Топырақтың тығыздығын анықтау үшін Wile маркалы финдік тығыздық өлшегіш (ASAE S313.3 стандарты) қолданылды. Эксперименттік зерттеулердің нәтижелері бойынша әзірленген және сериялық жұмыс органдарының тартылыс күштері алынды. Осылайша, топыраққа минералды тыңайтқыштарды сараланған деңгейде енгізу үшін эксперименттік жалпақ тілгіш-терең қопсытқыш-тыңайтқыштың қозғалыс процесін зерттей отырып, тарту күшінің оның қозғалу жылдамдығына аналитикалық тәуелділігі алынды. Теңдеуді талдау зерттелетін топырақ өңдеу жұмыс органының тарту күшінің қозғалыс жылдамдығына квадраттық тәуелділігін көрсетеді. Сонымен қатар, салыстырмалы талдау теориялық зерттеулер мен эксперименттік мәліметтердің нәтижелері жақын екенін көрсетті. Бұл зерттеу бағытының дұрыстығын көрсетеді.