Franziska Sabath
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Franziska Sabath has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
Ralf Bechstein
Physical Chemistry I, Bielefeld University, 33615 Bielefeld, Germany
5 shared publications- Tobias Dickbreder
Physical Chemistry I, Bielefeld University, 33615 Bielefeld, Germany
5 shared publications Angelika Kühnle
Physical Chemistry I, Faculty of Chemistry, Bielefeld University, Universitätstraße 25, 33615 Bielefeld, Germany
3 shared publications- Angelika Kühnle
Physical Chemistry I, Faculty of Chemistry, Bielefeld University, Universitätsstraße 25, 33615 Bielefeld, Germany
3 shared publications - Adam Stuart Foster
Aalto University
2 shared publications - Bernhard Reischl
Institute for Atmospheric and Earth System Research (INAR)/Physics, Faculty of Science, University of Helsinki, 00014 Helsinki, Finland
2 shared publications
Latest Publications
- 13 November 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (46)
When and how particles are removed by drops
Particulate contaminants decrease the power output of solar panels and the transparency of windows and are detrimental to microelectronics, where even a single particle can induce a short circuit. Despite substantial research on particle adhesion and self-cleaning, it remains unclear when and how a drop can remove a particle from a surface, thus efficiently cleaning the surface. Here, by combining lattice Boltzmann simulations and confocal microscopy experiments, we show that at least six different scenarios arise from the complex interplay between capillary and friction forces when a drop collides with a particle on a surface. Notably, the capillary force plays a dual role in particle removal: While its tangential component always drives removal, its normal component can also hinder it. We introduce a dimensionless capillary capture parameter that successfully predicts particle removal across a wide range of particle and surface properties. Our results reveal that the design of easy-to-clean surfaces should focus not only on maximizing hydrophobicity but also on minimizing the particle-surface friction.
- 13 November 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (46)
When and how particles are removed by drops
Particulate contaminants decrease the power output of solar panels and the transparency of windows and are detrimental to microelectronics, where even a single particle can induce a short circuit. Despite substantial research on particle adhesion and self-cleaning, it remains unclear when and how a drop can remove a particle from a surface, thus efficiently cleaning the surface. Here, by combining lattice Boltzmann simulations and confocal microscopy experiments, we show that at least six different scenarios arise from the complex interplay between capillary and friction forces when a drop collides with a particle on a surface. Notably, the capillary force plays a dual role in particle removal: While its tangential component always drives removal, its normal component can also hinder it. We introduce a dimensionless capillary capture parameter that successfully predicts particle removal across a wide range of particle and surface properties. Our results reveal that the design of easy-to-clean surfaces should focus not only on maximizing hydrophobicity but also on minimizing the particle-surface friction.
- Open Access
- 11 November 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (43) , 27236-27249
Does the Si/Al-order in K-feldspars influence their hydration structure?
No significant impact of Si/Al-order on hydration layer structure of K-feldspars is observed in AFM experiments, but atomistic MD simulations indicate differences in hydration layer dynamics.
- 11 November 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (43) , 27236-27249
Open AccessDoes the Si/Al-order in K-feldspars influence their hydration structure?
No significant impact of Si/Al-order on hydration layer structure of K-feldspars is observed in AFM experiments, but atomistic MD simulations indicate differences in hydration layer dynamics.
- Open Access
- 9 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (11) , 17073-17082
Silica Sol–Gel Coatings for Solar Panels: Drop Friction and Particle Adhesion
Soiling of solar panel surfaces reduces energy output and requires freshwater for cleaning. To address this challenge transparent, hydrophobic, and easy-to-clean silica-based coatings have been fabricated. Analysis of these coatings focused mostly on contact angle measurements, while drop mobility and particle adhesion─key factors for efficient soil removal─remain underexplored. To address this gap, here organically modified silicate coatings were synthesized by mixing tetraethyl orthosilicate (TEOS) with alkyl-trimethoxysilanes (alkyl-TMS) of varying alkyl chain lengths (methyl, n-propyl, and n-hexyl) and concentrations. The films showed high optical transparency (92%) and low surface roughness (0.3-1.0 nm). Increasing alkyl-TMS content and chain length increased surface hydrophobicity, leading to advancing contact angles up to 106°. By scanning drop friction microscopy and colloidal probe AFM, we quantified and correlated drop mobility and particle adhesion. A higher alkyl-TMS content led to a reduced drop friction force and reduced particle adhesion, although, mechanical robustness also decreased. Cleaning tests confirmed that coatings with lower friction and adhesion enable more effective soil removal.
- 9 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (11) , 17073-17082
Open AccessSilica Sol–Gel Coatings for Solar Panels: Drop Friction and Particle Adhesion
Soiling of solar panel surfaces reduces energy output and requires freshwater for cleaning. To address this challenge transparent, hydrophobic, and easy-to-clean silica-based coatings have been fabricated. Analysis of these coatings focused mostly on contact angle measurements, while drop mobility and particle adhesion─key factors for efficient soil removal─remain underexplored. To address this gap, here organically modified silicate coatings were synthesized by mixing tetraethyl orthosilicate (TEOS) with alkyl-trimethoxysilanes (alkyl-TMS) of varying alkyl chain lengths (methyl, n-propyl, and n-hexyl) and concentrations. The films showed high optical transparency (92%) and low surface roughness (0.3-1.0 nm). Increasing alkyl-TMS content and chain length increased surface hydrophobicity, leading to advancing contact angles up to 106°. By scanning drop friction microscopy and colloidal probe AFM, we quantified and correlated drop mobility and particle adhesion. A higher alkyl-TMS content led to a reduced drop friction force and reduced particle adhesion, although, mechanical robustness also decreased. Cleaning tests confirmed that coatings with lower friction and adhesion enable more effective soil removal.
- Open Access
- 12 November 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (44) , 23574-23583
Nanoscopic feldspar islands on K-feldspar microcline (001)
High-resolution atomic force microscopy on microcline (001) reveals nanoscopic islands, which have the same atomic structure as the terrace and are stable in contact with water. The islands were identified as an intrinsic feature of the surface.
- 12 November 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (44) , 23574-23583
Open AccessNanoscopic feldspar islands on K-feldspar microcline (001)
High-resolution atomic force microscopy on microcline (001) reveals nanoscopic islands, which have the same atomic structure as the terrace and are stable in contact with water. The islands were identified as an intrinsic feature of the surface.
- Open Access
- 31 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (44) , eaea2378
Surface reconstructions govern ice nucleation on silver iodide
Silver iodide (AgI) is among the most effective ice-nucleating agents, attributed to its close lattice match with hexagonal ice. However, the atomic-level mechanism behind its efficiency remains unclear. The basal surfaces of AgI are polar and inherently unstable, necessitating a compensation mechanism, such as surface reconstruction, which may disrupt the favorable lattice match with ice. We combine noncontact atomic force microscopy with advanced computational modeling to determine the atomic structure of basal AgI surfaces in ultrahigh vacuum. The Ag-terminated (0001) surface exhibits a (2 × 2) reconstruction with ordered Ag vacancies, preserving a hexagonal arrangement of surface atoms that facilitates epitaxial ice growth. In contrast, the I-terminated (000 1 ¯ ) surface adopts a complex rectangular reconstruction, incompatible with continuous ice layer formation. These findings highlight the decisive role of surface atomic structure and indicate that the Ag-terminated basal plane is primarily responsible for efficient ice nucleation on AgI.
- 31 October 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (44) , eaea2378
Open AccessSurface reconstructions govern ice nucleation on silver iodide
Silver iodide (AgI) is among the most effective ice-nucleating agents, attributed to its close lattice match with hexagonal ice. However, the atomic-level mechanism behind its efficiency remains unclear. The basal surfaces of AgI are polar and inherently unstable, necessitating a compensation mechanism, such as surface reconstruction, which may disrupt the favorable lattice match with ice. We combine noncontact atomic force microscopy with advanced computational modeling to determine the atomic structure of basal AgI surfaces in ultrahigh vacuum. The Ag-terminated (0001) surface exhibits a (2 × 2) reconstruction with ordered Ag vacancies, preserving a hexagonal arrangement of surface atoms that facilitates epitaxial ice growth. In contrast, the I-terminated (000 1 ¯ ) surface adopts a complex rectangular reconstruction, incompatible with continuous ice layer formation. These findings highlight the decisive role of surface atomic structure and indicate that the Ag-terminated basal plane is primarily responsible for efficient ice nucleation on AgI.
- Open Access
- 21 May 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (35) , 18317-18325
Water desorption from microcline (001): insights into the first water layer
Temperature programmed desorption shows that one water molecule per unit cell binds strongly on microcline (001). Three additional water molecules can bind less strongly but with a similar adsorption energy. Other molecules occupy the second layer.
- 21 May 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (35) , 18317-18325
Open AccessWater desorption from microcline (001): insights into the first water layer
Temperature programmed desorption shows that one water molecule per unit cell binds strongly on microcline (001). Three additional water molecules can bind less strongly but with a similar adsorption energy. Other molecules occupy the second layer.
- Open Access
- 28 December 2023
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 14 (1) , 1225-1237
unDrift: A versatile software for fast offline SPM image drift correction
Scanning probe microscopy (SPM) techniques are widely used to study the structure and properties of surfaces and interfaces across a variety of disciplines in chemistry and physics. One of the major artifacts in SPM is (thermal) drift, an unintended movement between sample and probe, which causes a distortion of the recorded SPM data. Literature holds a multitude of strategies to compensate for drift during the measurement (online drift correction) or afterwards (offline drift correction). With the currently available software tools, however, offline drift correction of SPM data is often a tedious and time-consuming task. This is particularly disadvantageous when analyzing long image series. Here, we present unDrift, an easy-to-use scientific software for fast and reliable drift correction of SPM images. unDrift provides three different algorithms to determine the drift velocity based on two consecutive SPM images. All algorithms can drift-correct the input data without any additional reference. The first semi-automatic drift correction algorithm analyzes the different distortion of periodic structures in two consecutive up and down (down and up) images, which enables unDrift to correct SPM images without stationary features or overlapping scan areas. The other two algorithms determine the drift velocity from the apparent movement of stationary features either by automatic evaluation of the cross-correlation image or based on positions identified manually by the user. We demonstrate the performance and reliability of unDrift using three challenging examples, namely images distorted by a very high drift velocity, only partly usable images, and images exhibiting an overall weak contrast. Moreover, we show that the semi-automatic analysis of periodic images can be applied to a long series containing hundreds of images measured at the calcite–water interface.
- 28 December 2023
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 14 (1) , 1225-1237
Open AccessunDrift: A versatile software for fast offline SPM image drift correction
Scanning probe microscopy (SPM) techniques are widely used to study the structure and properties of surfaces and interfaces across a variety of disciplines in chemistry and physics. One of the major artifacts in SPM is (thermal) drift, an unintended movement between sample and probe, which causes a distortion of the recorded SPM data. Literature holds a multitude of strategies to compensate for drift during the measurement (online drift correction) or afterwards (offline drift correction). With the currently available software tools, however, offline drift correction of SPM data is often a tedious and time-consuming task. This is particularly disadvantageous when analyzing long image series. Here, we present unDrift, an easy-to-use scientific software for fast and reliable drift correction of SPM images. unDrift provides three different algorithms to determine the drift velocity based on two consecutive SPM images. All algorithms can drift-correct the input data without any additional reference. The first semi-automatic drift correction algorithm analyzes the different distortion of periodic structures in two consecutive up and down (down and up) images, which enables unDrift to correct SPM images without stationary features or overlapping scan areas. The other two algorithms determine the drift velocity from the apparent movement of stationary features either by automatic evaluation of the cross-correlation image or based on positions identified manually by the user. We demonstrate the performance and reliability of unDrift using three challenging examples, namely images distorted by a very high drift velocity, only partly usable images, and images exhibiting an overall weak contrast. Moreover, we show that the semi-automatic analysis of periodic images can be applied to a long series containing hundreds of images measured at the calcite–water interface.
- Open Access
- 19 December 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (7) , 3462-3473
Atomic structure and water arrangement on K-feldspar microcline (001)
The properties of clouds, such as their reflectivity or their likelihood to precipitate, depend on whether the cloud droplets are liquid or frozen. Thus, understanding the ice nucleation mechanisms is essential for the development of reliable climate models. Most ice nucleation in the atmosphere is heterogeneous, i.e., caused by ice nucleating particles such as mineral dusts or organic aerosols. In this regard, K-feldspar minerals have attracted great interest recently as they have been identified as one of the most important ice nucleating particles under mixed-phase cloud conditions. The mechanism by which feldspar minerals facilitate ice nucleation remains, however, elusive. Here, we present atomic force microscopy (AFM) experiments on microcline (001) performed in an ultrahigh vacuum and at the solid–water interface together with density functional theory (DFT) and molecular dynamics (MD) calculations. Our ultrahigh vacuum data reveal features consistent with a hydroxyl-terminated surface. This finding suggests that water in the residual gas readily reacts with the surface. Indeed, the corresponding DFT calculations confirm a dissociative water adsorption. Three-dimensional AFM measurements performed at the mineral–water interface unravel a layered hydration structure with two features per surface unit cell. A comparison with MD calculations suggests that the structure observed in AFM corresponds to the second hydration layer rather than the first water layer. In agreement with previous computation results, no ice-like structure is seen, questioning an explanation of the ice nucleation ability by lattice match. Our results provide an atomic-scale benchmark for the clean and water-covered microcline (001) plane, which is mandatory for understanding the ice nucleation mechanism on feldspar minerals.
- 19 December 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (7) , 3462-3473
Open AccessAtomic structure and water arrangement on K-feldspar microcline (001)
The properties of clouds, such as their reflectivity or their likelihood to precipitate, depend on whether the cloud droplets are liquid or frozen. Thus, understanding the ice nucleation mechanisms is essential for the development of reliable climate models. Most ice nucleation in the atmosphere is heterogeneous, i.e., caused by ice nucleating particles such as mineral dusts or organic aerosols. In this regard, K-feldspar minerals have attracted great interest recently as they have been identified as one of the most important ice nucleating particles under mixed-phase cloud conditions. The mechanism by which feldspar minerals facilitate ice nucleation remains, however, elusive. Here, we present atomic force microscopy (AFM) experiments on microcline (001) performed in an ultrahigh vacuum and at the solid–water interface together with density functional theory (DFT) and molecular dynamics (MD) calculations. Our ultrahigh vacuum data reveal features consistent with a hydroxyl-terminated surface. This finding suggests that water in the residual gas readily reacts with the surface. Indeed, the corresponding DFT calculations confirm a dissociative water adsorption. Three-dimensional AFM measurements performed at the mineral–water interface unravel a layered hydration structure with two features per surface unit cell. A comparison with MD calculations suggests that the structure observed in AFM corresponds to the second hydration layer rather than the first water layer. In agreement with previous computation results, no ice-like structure is seen, questioning an explanation of the ice nucleation ability by lattice match. Our results provide an atomic-scale benchmark for the clean and water-covered microcline (001) plane, which is mandatory for understanding the ice nucleation mechanism on feldspar minerals.