Haoyuan Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haoyuan Zheng has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Kai Li
Harbin Institute of Technology
3 shared publications - Weishan Chen
Harbin Institute of Technology
3 shared publications - Xianxin Zhou
School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, China
3 shared publications - Biao Liu
School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin, China
2 shared publications - Lu Zhang
Mechatronic Engineering, College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin, China
2 shared publications - Biao Liu
State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin 150001, China
1 shared publication
Latest Publications
- 17 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 16108-16119
Study of an Untethered Bioinspired Piezoelectric Father-Son Robot for Deep-Sea Narrow Space
Wireless motion and miniature size are two essential features for deep-sea robots applying in the practical confined area, which are incompatible due to the existence of onboard power supply and anti-pressure devices. Here, inspired by the energy-saving hitchhiking behavior of marine remora, we propose a piezoelectric-jetting father–son robot with size of Φ 14 3 13 cm 3 . The untethered father robot provides power for the adsorbed 5-cm-length son robot, and the micro agile son can detach to freely move in the small space that is inapplicable for father. The structural shapes of lateral jetting unit are optimized by numerical simulation and the corresponding flow field characteristics are elaborated to assist the optimization analysis. Then, the pressure-resilience electronics circuits are designed, and it can normally output high-frequency square wave of 210 V p-p and excite the father–son robot to implement the wireless 3-DoF motions under 20 MPa environment. Finally, two robots cooperate to detect a cornering channel with width of close to father diameter, and the son recombines the father and together return voyage after the son achieves the multiple high-difficulty movements in such a narrow channel. This work can supply solution of developing the underwater robot in complex deep-sea occasions.
- 17 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (12) , 16108-16119
Study of an Untethered Bioinspired Piezoelectric Father-Son Robot for Deep-Sea Narrow Space
Wireless motion and miniature size are two essential features for deep-sea robots applying in the practical confined area, which are incompatible due to the existence of onboard power supply and anti-pressure devices. Here, inspired by the energy-saving hitchhiking behavior of marine remora, we propose a piezoelectric-jetting father–son robot with size of Φ 14 3 13 cm 3 . The untethered father robot provides power for the adsorbed 5-cm-length son robot, and the micro agile son can detach to freely move in the small space that is inapplicable for father. The structural shapes of lateral jetting unit are optimized by numerical simulation and the corresponding flow field characteristics are elaborated to assist the optimization analysis. Then, the pressure-resilience electronics circuits are designed, and it can normally output high-frequency square wave of 210 V p-p and excite the father–son robot to implement the wireless 3-DoF motions under 20 MPa environment. Finally, two robots cooperate to detect a cornering channel with width of close to father diameter, and the son recombines the father and together return voyage after the son achieves the multiple high-difficulty movements in such a narrow channel. This work can supply solution of developing the underwater robot in complex deep-sea occasions.
- 28 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 29 (5) , 3277-3288
A 7 cm-Scale Spherical Underwater Robot Using Piezoelectric Double-Jet Actuator for Deep-Sea Environment
Moving rapidly and agilely in high-pressure environment is a challenge for existing miniature underwater robots, which limits deeply the ocean exploitation. Here, we present a spherical underwater robot with diameter of 7 cm, and it has merits of miniature structure without bulky and antihydropressure devices, 3-DOFs agile motion, and good adaptability for 25 MPa environment simultaneously. Four designed piezoelectric double-jet actuators are embedded directly in the spherical shell without transmission mechanism, which enables the robot with relatively fast motion speed by compared with the published robots. Six motion modes are implemented by the cooperation of actuators, including rising, hovering, and sinking motions in the vertical direction and straight driving, turning, and in-situ turning motions in the horizontal plane. A robot prototype was fabricated, and its performance was tested. Experimental results indicated that the rising, straight driving, and in-situ turning speed reached up to 95.2 mm/s (1.36 BL/s), 99.6 mm/s (1.42 BL/s), and 5 rad/s, respectively. Besides, the robot could also rapidly turn at 1.3 rad/s with the turning radius of 22.1 mm. The speed deviation within 10% under different water pressures was obtained. The obstacle avoidance was successfully fulfilled by controlling the robot to pass through the narrow gap with width of only 1.5 body length of robot. There excellent characteristics demonstrate agile mobility and give the robot ability to move in the confined area of deep sea.
- 28 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 29 (5) , 3277-3288
A 7 cm-Scale Spherical Underwater Robot Using Piezoelectric Double-Jet Actuator for Deep-Sea Environment
Moving rapidly and agilely in high-pressure environment is a challenge for existing miniature underwater robots, which limits deeply the ocean exploitation. Here, we present a spherical underwater robot with diameter of 7 cm, and it has merits of miniature structure without bulky and antihydropressure devices, 3-DOFs agile motion, and good adaptability for 25 MPa environment simultaneously. Four designed piezoelectric double-jet actuators are embedded directly in the spherical shell without transmission mechanism, which enables the robot with relatively fast motion speed by compared with the published robots. Six motion modes are implemented by the cooperation of actuators, including rising, hovering, and sinking motions in the vertical direction and straight driving, turning, and in-situ turning motions in the horizontal plane. A robot prototype was fabricated, and its performance was tested. Experimental results indicated that the rising, straight driving, and in-situ turning speed reached up to 95.2 mm/s (1.36 BL/s), 99.6 mm/s (1.42 BL/s), and 5 rad/s, respectively. Besides, the robot could also rapidly turn at 1.3 rad/s with the turning radius of 22.1 mm. The speed deviation within 10% under different water pressures was obtained. The obstacle avoidance was successfully fulfilled by controlling the robot to pass through the narrow gap with width of only 1.5 body length of robot. There excellent characteristics demonstrate agile mobility and give the robot ability to move in the confined area of deep sea.
- Open Access
Achieving Full Forward Flow of Valveless Piezoelectric Micropump Used for Micro Analysis System
The valveless piezoelectric micropump has the advantages of simple structure, high precision and low cost, which can realize the directional transport of micro-fluid and wildly be applied in a micro analysis system. However, backflow at the outlet cannot be avoided due to the limitation of its working mechanism. Large reflux rate can increase the volume control accuracy per cycle, but reduces the stability of the micro analysis system. In order to achieve a full forward flow, which reduce the influence of backflow on the system’s stability, the reflux characteristics of the designed valveless piezoelectric micropump were studied. The condition proposed, which should be satisfied for obtaining full forward flow, is that the reflux rate should be less than 50%. The influence of relations between the size of the key structures and pumping characteristics are established, and the references for structural parameter selection to reduce backflow and achieve full forward flow are given. This paper highlights the methods of controlling the pumping performance and achieving full forward flow, based on structural parameter selection analysis and adjusting excitation. The reflux rate can be reduced to 5% when the inlet angle is increased to 9°. The experimental results verify the validity of the obtained results and the proposed methods of control. This work provides important references for applying valveless piezoelectric micropumps in micro analysis and precision-driven systems.
Open AccessAchieving Full Forward Flow of Valveless Piezoelectric Micropump Used for Micro Analysis System
The valveless piezoelectric micropump has the advantages of simple structure, high precision and low cost, which can realize the directional transport of micro-fluid and wildly be applied in a micro analysis system. However, backflow at the outlet cannot be avoided due to the limitation of its working mechanism. Large reflux rate can increase the volume control accuracy per cycle, but reduces the stability of the micro analysis system. In order to achieve a full forward flow, which reduce the influence of backflow on the system’s stability, the reflux characteristics of the designed valveless piezoelectric micropump were studied. The condition proposed, which should be satisfied for obtaining full forward flow, is that the reflux rate should be less than 50%. The influence of relations between the size of the key structures and pumping characteristics are established, and the references for structural parameter selection to reduce backflow and achieve full forward flow are given. This paper highlights the methods of controlling the pumping performance and achieving full forward flow, based on structural parameter selection analysis and adjusting excitation. The reflux rate can be reduced to 5% when the inlet angle is increased to 9°. The experimental results verify the validity of the obtained results and the proposed methods of control. This work provides important references for applying valveless piezoelectric micropumps in micro analysis and precision-driven systems.