Keyu Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Keyu Li has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Jiangfeng Wang
Key Laboratory of Unsteady Aerodynamics and Flow Control, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
3 shared publications - Jianying Lan
Key Laboratory of Unsteady Aerodynamics and Flow Control, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
1 shared publication - Yilun Yan
Key Laboratory of Unsteady Aerodynamics and Flow Control, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
1 shared publication - Yuxuan Gu
Key Laboratory of Unsteady Aerodynamics and Flow Control, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
1 shared publication
Latest Publications
- Open Access
Numerical Analysis of the Three-Dimensional Interaction Between Nanosecond-Pulsed Actuation and Pulsed H2 Jets in Supersonic Crossflow
A combined flow control method, integrating nanosecond pulsed surface dielectric barrier discharge (NS-SDBD) with pulsed jets, is proposed to address the challenge of low mixing efficiency in supersonic combustion. Numerical validation and mechanism analysis were conducted by solving the three-dimensional unsteady Reynolds-averaged Navier–Stokes (RANS) equations, coupled with the shear stress transport (SST) k–ω turbulence model. The simulations were carried out under a Mach 2.8 inflow condition with a 50 kHz pulsed frequency for H2 jets. The results demonstrate that, compared to the steady jet case, the combined control scheme increases the combustion product mass flow rate by 27.1% and enhances combustion efficiency by 26.8%. The average temperature in the wake region increases by 65 K, while the total pressure recovery coefficient shows only a marginal change. The pressure disturbance center evolves along the outer edge of the counter-rotating vortex pair (CVP) and is eventually absorbed by the vortex core. This process generates favorable velocity and vorticity perturbations, which enhance O2 entrainment into the CVP and increase the average wake temperature. Meanwhile, the strengthened reflected shock induces favorable velocity perturbations in the upper shear layer of the wake and further elevates the local temperature.
Open AccessNumerical Analysis of the Three-Dimensional Interaction Between Nanosecond-Pulsed Actuation and Pulsed H2 Jets in Supersonic Crossflow
A combined flow control method, integrating nanosecond pulsed surface dielectric barrier discharge (NS-SDBD) with pulsed jets, is proposed to address the challenge of low mixing efficiency in supersonic combustion. Numerical validation and mechanism analysis were conducted by solving the three-dimensional unsteady Reynolds-averaged Navier–Stokes (RANS) equations, coupled with the shear stress transport (SST) k–ω turbulence model. The simulations were carried out under a Mach 2.8 inflow condition with a 50 kHz pulsed frequency for H2 jets. The results demonstrate that, compared to the steady jet case, the combined control scheme increases the combustion product mass flow rate by 27.1% and enhances combustion efficiency by 26.8%. The average temperature in the wake region increases by 65 K, while the total pressure recovery coefficient shows only a marginal change. The pressure disturbance center evolves along the outer edge of the counter-rotating vortex pair (CVP) and is eventually absorbed by the vortex core. This process generates favorable velocity and vorticity perturbations, which enhance O2 entrainment into the CVP and increase the average wake temperature. Meanwhile, the strengthened reflected shock induces favorable velocity perturbations in the upper shear layer of the wake and further elevates the local temperature.
- Open Access
Numerical Investigation of the Coupling Effects of Pulsed H2 Jets and Nanosecond-Pulsed Actuation in Supersonic Crossflow
Numerical investigations were conducted to analyze the coupling effects of pulsed H2 jets and nanosecond-pulsed actuation (NS-SDBD) in a supersonic crossflow. The FVM was employed to solve the multi-component 2D URANS equations with the SST k-omega turbulence model, while H2-air combustion was described using a seven species–seven reactions chain reaction model, and the plasma thermal effect was represented by a phenomenological model. The backward-facing step flows with an inlet Mach number of 2.5 and a pulsed jet frequency of 10 kHz under different actuation conditions were simulated. The combustion enhancement mechanism under an actuation frequency of 20 kHz was analyzed. Research indicates that compression waves induced by NS-SDBD enhance H2-air mixing and facilitate temperature transport as the flow progresses. This progress is significantly associated with the flow structures generated by pulsed jets. Under this condition, the fuel utilization rate in the flow field increased by 61.2%, the total pressure recovery coefficient increased by 5.34%, and the outlet total temperature slightly increased even with a 50% reduction in fuel flow rate. Comparative analysis of different actuation cases demonstrates that evenly distributed actuation within the jet cycle yields better effects. The innovation of this study lies in proposing and exploring a potential method to address inadequate combustion under high-speed inflow conditions, which couples NS-SDBD with pulsed hydrogen jets.
Open AccessNumerical Investigation of the Coupling Effects of Pulsed H2 Jets and Nanosecond-Pulsed Actuation in Supersonic Crossflow
Numerical investigations were conducted to analyze the coupling effects of pulsed H2 jets and nanosecond-pulsed actuation (NS-SDBD) in a supersonic crossflow. The FVM was employed to solve the multi-component 2D URANS equations with the SST k-omega turbulence model, while H2-air combustion was described using a seven species–seven reactions chain reaction model, and the plasma thermal effect was represented by a phenomenological model. The backward-facing step flows with an inlet Mach number of 2.5 and a pulsed jet frequency of 10 kHz under different actuation conditions were simulated. The combustion enhancement mechanism under an actuation frequency of 20 kHz was analyzed. Research indicates that compression waves induced by NS-SDBD enhance H2-air mixing and facilitate temperature transport as the flow progresses. This progress is significantly associated with the flow structures generated by pulsed jets. Under this condition, the fuel utilization rate in the flow field increased by 61.2%, the total pressure recovery coefficient increased by 5.34%, and the outlet total temperature slightly increased even with a 50% reduction in fuel flow rate. Comparative analysis of different actuation cases demonstrates that evenly distributed actuation within the jet cycle yields better effects. The innovation of this study lies in proposing and exploring a potential method to address inadequate combustion under high-speed inflow conditions, which couples NS-SDBD with pulsed hydrogen jets.
- Open Access
A Numerical Investigation of Supersonic Combustion Flow Control by Nanosecond-Pulsed Actuations
The efficiency of supersonic combustion is largely dependent on inlet and injection parameters. Additional energy input is required in some off-design conditions, and nanosecond discharge actuation can be a solution. In the present study, a phenomenological model of a nanosecond-pulsed surface dielectric barrier discharge (NS-SDBD) actuator was developed to analyze the combustion enhancement effect for a supersonic combustor with transverse H2 injection. A seven-reaction H2–air combustion model was adopted for the numerical simulation. Dynamic mode decomposition (DMD) was employed to acquire temperature perturbation in spatial and temporal domains. The results show that the actuator provides additional temperature-increment and species transportation through compression waves. The combustion enhancement effect is mainly attributed to the flow perturbation in the shear layer, which promotes the turbulent diffusion of fuel. Given the same power input, the combustion efficiency at the shockwave reflection point is increased by 17.5%, and the flame height is increased by 15.4% at its maximum.
Open AccessA Numerical Investigation of Supersonic Combustion Flow Control by Nanosecond-Pulsed Actuations
The efficiency of supersonic combustion is largely dependent on inlet and injection parameters. Additional energy input is required in some off-design conditions, and nanosecond discharge actuation can be a solution. In the present study, a phenomenological model of a nanosecond-pulsed surface dielectric barrier discharge (NS-SDBD) actuator was developed to analyze the combustion enhancement effect for a supersonic combustor with transverse H2 injection. A seven-reaction H2–air combustion model was adopted for the numerical simulation. Dynamic mode decomposition (DMD) was employed to acquire temperature perturbation in spatial and temporal domains. The results show that the actuator provides additional temperature-increment and species transportation through compression waves. The combustion enhancement effect is mainly attributed to the flow perturbation in the shear layer, which promotes the turbulent diffusion of fuel. Given the same power input, the combustion efficiency at the shockwave reflection point is increased by 17.5%, and the flame height is increased by 15.4% at its maximum.