YPYanhu Pei

Yanhu Pei

*This is an algorithmically generated author record based on publicly available information.

Yanhu Pei has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Collision-Free Trajectory Planning Optimization Algorithms for Two-Arm Cascade Combination System

    by Jingjing Xu, Long Tao, Yanhu Pei, Qiang Cheng, Hongyan Chu, Tao Zhang

    As a kind of space robot, the two-arm cascade combination system (TACCS) has been applied to perform auxiliary operations at different locations outside space cabins. The motion coupling relation of two arms and complex surrounding obstacles make the collision-free trajectory planning optimization of TACCS more difficult, which has become an urgent problem to be solved. For the above problem, this paper proposed collision-free and time–energy–minimum trajectory planning optimization algorithms, considering the motion coupling of two arms. In this method, the screw-based inverse kinematics (IK) model of TACCS is established to provide the basis for the motion planning in joint space by decoupling the whole IK problem into two IK sub-problems of two arms; the minimum distance calculation model is established based on the hybrid geometric enveloping way and basic distance functions, which can provide the efficient and accurate data basis for the obstacle-avoidance constraint condition of the trajectory optimization. Moreover, the single and bi-layer optimization algorithms are presented by taking motion time and energy consumption as objectives and considering obstacle-avoidance and kinematics constraints. Finally, through example cases, the results indicate that the bi-layer optimization has higher convergence efficiency under the premise of ensuring the optimization effect by separating variables and constraint terms. This work can provide theoretical and methodological support for the efficient and intelligent applications of TACCS in the space arena.

  • Open Access

    A Statistical Evaluation Method Based on Fuzzy Failure Data for Multi-State Equipment Reliability

    by Jingjing Xu, Qiaobin Yan, Yanhu Pei, Zhifeng Liu, Qiang Cheng, Hongyan Chu, Tao Zhang

    For complex equipment, it is easy to over-evaluate the impact of failure on production by estimating the reliability level only through failure probability. To remedy this problem, this paper proposes a statistical evaluation method based on fuzzy failure data considering the multi-state characteristics of equipment failures. In this method, the new reliability-evaluation scheme is firstly presented based on the traditional statistical analysis method using the Weibull distribution function. For this scheme, the failure-grade index is defined, and a fuzzy-evaluation method is also proposed by comprehensively considering failure severity, failure maintenance, time, and cost; this is then combined with the time between failures to characterize the failure state. Based on the fuzzy failure data, an improved adaptive-failure small-sample-expansion method is proposed based on the classical bootstrap method and the deviation judgment between distributions of the original and newborn samples. Finally, a novel reliability-evaluation model, related to the failure grade and its membership degree, is established to quantify the reliability level of equipment more realistically. Example cases for three methods of the scheme (the failure-grade fuzzy-evaluation method, the sample-expansion method, and the reliability-evaluation modeling method) are presented, respectively, to validate the effectiveness and significance of the proposed reliability-evaluation technology.


  • Open Access

    An Optimization Method of Flexible Manufacturing System Reliability Allocation Based on Two Dimension-Reduction Strategies

    by Jingjing Xu, Long Tao, Yanhu Pei, Zhifeng Liu, Qiaobin Yan, Qiang Cheng

    As increasingly extensive applications of flexible manufacturing systems (FMSs) arise, their reliability allocation has been a research hot spot. But, since FMSs are always composed of transfer and buffer devices, production machines, and complex control systems, the large number of basic elements makes the number of variables and constraints of reliability-allocation optimization increase greatly, which leads to the difficulty and inefficiency of optimization. To solve the above problem, two dimension-reduction strategies are proposed for the FMS reliability optimization with low cost and a high level of reliability as the objectives, and they are the reliability-weight double-threshold qualification strategy (RWTS) and the bi-level optimization strategy (BLOS), respectively. Based on these two strategies, an overall reliability-allocation optimization model and a bi-level reliability-allocation optimization model are established based on the FMS reliability evaluation presented in our previous work, and their algorithms based on particle swarm optimization (PSO) are presented. In terms of their contributions, for the RWTS, thresholds of reliability and the weight index of each basic element are set to dynamically reduce the number of variables in each iteration of the optimization; for the BLOS, the overall reliability-allocation optimization problem for transitioning from the FMS to basic elements can be transformed into simpler allocation optimizations from the FMS to subsystems and from subsystems to basic elements, which have fewer variables, and this can largely improve the optimization convergence performance. Through applying this to a box-parts finishing FMS, compared with the traditional optimization method, the high efficiency and the good allocation effect of the optimization based on these two strategies for improving convergence speed are verified by the simulation results. The proposed method has great significance for FMS design due to its limited cost but high-reliability requirement.