ATAmandos Tulegulov

Amandos Tulegulov

*This is an algorithmically generated author record based on publicly available information.

Amandos Tulegulov has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ОНТОЛОГИЯЛЫҚ ТЕЗАУРУСТЫ ҚОЛДАНУ ӘДІСТЕМЕСІ СҰРАҚ-ЖАУАП ЖҮЙЕЛЕРІНЕ АРНАЛҒАН БАҒДАРЛАМАЛЫҚ МОДУЛЬ ҚҰРУ

    by М.ж. Ергеш, Б.ж. Ергеш, К.м. Максутова, А.д. Тулегулов

    Қазақ тілі үшін цифрлық ресурстар тапшылығы жағдайында Зияткерлік бағдарламаланатын жүйелерді қолдау үшін Қазақстан тарихы мектебінің курсының пәндік білімін ресімдеу ерекше өзекті болып отыр. Бұл жұмыста 5-10 сынып оқулықтарының толық корпусы негізінде құрылған Қазақстан тарихы бойынша зияткерлік бағдарламаланатын жүйелерді зерттеу нәтижелері ұсынылады және алынған білім графигінің QA-міндеттері үшін контекст іздеудің сапасына әсері талданады. Зерттеудің мақсаты-терминдерді теру алгоритмін әзірлеу (person, period, place, source, event, unknown). Бастапқы "астық" белгілерін алу үшін жоғары дәлдіктегі үлгілер пайдаланылады, содан кейін оқыту логистикалық регрессияны пайдалана отырып, XLM-R трансформаторының эмбеддингтерінде жүргізіледі. Seed-белгілеу бойынша валидацияда негізгі сыныптар (person, period, place) үшін 0,89 және F1-ден 0,92-ге дейінгі дәлдікке қол жеткізіледі. Зерттеудің ғылыми жаңалығы онтологияның практикалық пайдалылығын бағалау әдісін әзірлеу болып табылады QA-661 мысалдың жиынтығы (528 пойыз /133 тест) кепілдендірілген дұрыс жауап спандарымен. Ұсынылған әдіс бірнеше семантикалық іздеу конфигурацияларын салыстырады: оқулық бөлімдері бойынша негізгі іздеу, онтологиялық "құжаттар" бойынша іздеу және тезаурус пен онтология арқылы сұраныстар мен контексттерді кеңейту нұсқалары. Нәтижелер онтологиялық құжаттарды қолдану p@1-ді шамамен 0,56-дан 0,86-ға дейін және ndcg@10-ны ≈0,77-ден ≈0,92-ге дейін арттыратынын көрсетеді; біріктірілген "онтология + кеңейту" схемасы ndcg-нің жоғары деңгейін және сәйкес контексттерді толық қамтуды сақтайды. Осылайша, ұсынылған онтологиялық бағдарланған тезаурус пен Қазақстан тарихы бойынша білім графы 5–10 сыныптарға арналған оқу материалын құрылымдап қана қоймай, қазақ тіліндегі сұрақ-жауап жүйелерінде контекст іздеу сапасын айтарлықтай жақсартады және доменге бейімделген QA-модельдерді оқыту мен бағалауға арналған берік негіз қалыптастырады.

  • Open Access

    SOFTWARE FOR SELECTIVE LASER MELTING TECHNOLOGY

    by А.D. Tulegulov, A.м. Jumagaliyeva, A. Sadu, B. Yemilov, M.SH. Nurmagambetov, Zh.H. Zhantlesov, I.M. Dyussebayev, Б. Емилов

    The article is devoted to the study of additive manufacturing technologies, which have become increasingly important in recent years in modern mechanical engineering, aerospace engineering, medicine, and other high-tech industries. Of particular interest is the software for selective laser melting (SLM) technology. Modern algorithms allow for high dimensional accuracy, the ability to produce parts with specified properties, and a shorter production cycle compared to traditional manufacturing methods. In this study, the focus is on the automated control system for printing parts and assemblies using selective laser melting. The obtained data can be further used in the development of algorithms for automated selection of powder compositions and SLM modes. The purpose of this work is to automate the technology of selecting the composition of the powder material for selective laser melting. To achieve this goal, the work involves studying the SLM technology and the features of obtaining powders from technogenic waste, developing an algorithm for automating the selection of powder composition, and creating a software module that provides automatic selection of the optimal powder composition and printing parameters. The scientific novelty and significance of the work lie in the creation of a software and hardware complex for the rapid selection of powder composition and parameters of the selective laser melting process. The implementation of the proposed approach makes it possible to produce practical parts in a short time without compromising the quality and performance of the material, and it also forms the basis for further development of automated additive manufacturing control systems.

  • Open Access

    SLM ӘДІСІМЕН ҮШ ӨЛШЕМДІ ОБЪЕКТІНІ ҚАЛЫПТАСТЫРУ ПРОЦЕСІН АВТОМАТТАНДЫРУҒА АРНАЛҒАН БАҒДАРЛАМАЛЫҚ-ТЕХНИКАЛЫҚ ҚҰРЫЛҒЫЛАР

    by А. Тулегулов, K. Акишев, A. Джумагалиева, М. Байжарикова, C. Исаев, С. Исаев

    Қазіргі жағдайда автоматтандырылған бағдарламаланатын автономды өндірістік жүйелерді құру қажеттілігі әсіресе әскери және далалық инженерлік бөлімшелер үшін өзекті болып отыр. Дәстүрлі селективті лазерлік балқыту қондырғылары (SLM), алынған өнімдердің жоғары дәлдігі мен сапасына қарамастан, дизайнның күрделілігіне, компоненттердің қымбаттығына және қоршаған орта параметрлеріне жоғары сезімталдыққа байланысты зертханалық жағдайлардан тыс жұмыс істеуге жарамсыз. Осыған байланысты мақалада SLM әдісімен үш өлшемді объектіні қалыптастыру процесін автоматтандыру үшін бағдарламалық-техникалық құралдарды зерттеу мақсаты қойылған. Бұл өз кезегінде шектеулі ресурстар мен мамандандырылған Инфрақұрылым болмаған жағдайда металл бөлшектерін қалпына келтіруді және өндіруді қамтамасыз етуге қабілетті далалық және әскери жағдайларда пайдалануға бағытталған қосымша қондырғыны одан әрі құру үшін жағдай жасайды.

  • Open Access

    SOFTWARE DEVELOPMENT FOR SLM-3D PRINTER PROTOTYPE CONTROL SYSTEM USING KLIPPER FIRMWARE PROGRAM

    by N. Smakova, A. Tulegulov, K. Akishev, Zh. Zhantlesov, B. Serimbetov, A. Musabaev, A. Sterenhartz, А. Штеренхарц

    The paper presents the development of a simplified laboratory selective laser melting (SLM) unit aimed at cheapening the technology by replacing the complex powder feeding system with an open surface with software-controlled dosing and leveling mechanisms. The proposed design allows the use of typical 3D printing software with minimal modifications, facilitating integration and control. A technical implementation of the powder dispensing module is described, including stepper motors, an Arduino microcontroller, and a C# user interface. A layer formation algorithm is developed to ensure that mechanical damage to the part is prevented due to the special motion of the platform. The results of pilot experiments on the creation of a volumetric metal object using a 100 W fiber laser are presented.

  • Open Access

    КӨЛІК ҚҰРАЛДАРЫН ОРНАЛАСТЫРУ ҮШІН ЛОГИКАЛЫҚ МАГНИТТІК ДАТЧИКТЕРДІ ПАЙДАЛАНУ ЕРЕКШЕЛІКТЕРІ

    by А. Тулегулов, Б. Бельгибаев, Д. Жамангарин, Е. Майлыбаев

    Ақылды қала тұжырымдамасында қарастырылған бағыттардың бірі - бағдаршамды басқару. Қалалық жерлерде халық санының және автомобильдер санының өсуі, жанармайдан кейін пайда болған газдар шығарындыларын азайту, уақыт қажеттілігі болып отыр, нақтырақ айтқанда, өмір сүру сапасын арттыру үшін жол қозғалысын басқаруды талап етеді. Қала жолдарындағы көліктердің кептелісі көптеген зерттеулерді алаңдатты. Ғалымдар әртүрлі типтегі датчиктер немесе құрылғылар негізінде зерттеулер ұсынды. Бұл мақалада металл көліктермен жердің магнит өрісінің тартылыс күшін өлшеуге негізделген анықтаудың салыстырмалы түрде жаңа әдісін қолдану әрекеті келтірілген. Зерттеудің мақсаты өте төмен қуат тұтынуы және сымсыз радиожиілік байланысы арқылы деректерді беру диапазоны бар магниттік сенсор негізінде көлікті анықтау модулінің прототипін жобалау, өндіру және сынау болды. Мақсатқа жету үшін прототип қуатты өте төмен микроконтроллер негізінде lora және жаңа long range технологиясы негізінде жасалған. Сынақтар көлік құралын анықтаудың ең жақсы дәлдігін және ең аз қуат тұтынуды қамтамасыз ету үшін тиісті алгоритмді табуға бағытталған

  • USING ARTIFICIAL INTELLIGENCE FOR MONITORING UNAUTHORIZED CONNECTIONS TO CONSUMER POWER NETWORKS

    by K. Akishev, Zh. Nurtai, L. Akisheva, A. Tulegulov

    In 2024, the issue of «electricity theft» remains relevant in Kazakhstan, especially amid the projected electricity shortage, which, according to JSC «KEGOC», may exceed 1.025 GW. This situation forces the government of the Republic of Kazakhstan to consider measures such as importing electricity from the Russian Federation or introducing consumption restrictions for domestic users. With increasing tariffs and resource shortages, illegal connections place an additional burden on the energy system, leading to financial losses for energy companies and reducing the reliability of power supply. This article examines a monitoring system for electricity consumption aimed at detecting «unauthorized connections» and excessive power usage. An AI-based automated management system analyzes electricity consumption in real-time, comparing it with the nominal average value stored in a database. If the consumption exceeds the set limit by 10%, the program triggers an alarm by sending notifications via SMS to the subscriber’s phone, the Telegram messenger, and activating an alarm signal on the control panel or management system. If the consumer fails to respond within 10 minutes, the system automatically disconnects power on all phases, preventing possible overloads and unauthorized consumption. AI-based automated monitoring systems can track electricity consumption in real-time, detect anomalies, and quickly respond to unauthorized connections. This capability helps minimize financial losses, enhance control over power grids, and improve power supply reliability. AI-driven information technologies are becoming key tools in preventing electricity theft and unauthorized electricity usage, including in the Republic of Kazakhstan. Keywords: artificial intelligence, unauthorized access, energy consumption, automation of management, monitoring.

  • Open Access

    АДДИТИВТІ ӨНДІРІСТЕ CAD ЖӘНЕ CAE АҚПАРАТТЫҚ ТЕХНОЛОГИЯЛАРДЫ ҚОЛДАНУ

    by А. Тулегулов, К. Акишев, Ж. Жантлесов, М. Нурмагамбетов, А. Джумагалиева, И. Дуйсебаев

    Аддитивті өндіріс кәдімгі субтрактивті және деформацияланатын өндіріспен салыстырғанда жоғары тұндыру жылдамдығымен күрделі 3D компоненттерін жасауға мүмкіндік береді. Бірақ аддитивті өндіріс процесі әрқашан жылдам қызумен және кейіннен салқындатумен бірге жүреді. Бұл өнімнің сапасына кері әсер етуі мүмкін. Алайда аддитивті технологияның айқын артықшылықтарына қарамастан процесті қатаң бақылауды қамтамасыз ету және дайын өнімді алудың маңызды сәттері мен процедураларын автоматтандыру қажет. Мақалада аддитивті өндірісте CAD және CAE компьютерлік технологияларын қолдану қарастырылады. Аддитивті өндіріс технологиясы-бұл материалдарды қабатты жинақтау арқылы бөлшектерді өндіру технологиясы. Дәстүрлі технологиямен салыстырғанда материалды жою (кесу), материалды жинақтаудың бұл әдісі кері тәртіпте жүреді. Қосымша өндіріс технологиясы 1980 жылдардың аяғынан бастап біртіндеп дамыды. Бұл технологияда материалдың жобалық деректері (соның ішінде сұйықтықтар, ұнтақтар, сымдар немесе блоктар және т.б.) өндіріс әдісін автоматты түрде қалыптастырады. Қосымша өндіріс технологиялары дәстүрлі құралдарды, құрылғыларды және мультипроцессорлық процедураларды қолдануды қажет етпейді. 3D дизайн деректерін пайдалана отырып, кез келген күрделі бөлшектерді бір құрылғыда жылдам және дәл жасауға болады. Бұл технологиялық процестер мен өңдеу циклін айтарлықтай азайтады. Өнімнің құрылымы неғұрлым күрделі болса, оны жасаудың артықшылықтары соғұрлым маңызды болады. Соңғы жылдары қосымша өндіріс технологиялары қарқынды дамуға қол жеткізді. Қазіргі уақытта жабдықтың 20 дан астам түрі бар. Бұл бағдарламалық жасақтаманың жоғары даму деңгейі олардың қарапайымдылығымен және жұмыс процесінде қол жетімділігімен бірге оларды күнделікті өндірістік тәжірибеде ақпараттық технологиялар саласында терең білімі жоқ инженерлердің кең ауқымына қолдануға қосылуды жеңілдетеді.

  • Open Access

    ALGORITHM FOR MULTI-FACTORED FORECASTING OF NETWORK VULNERABILITIES: FROM CVE DATA ANALYSIS TO THE DEVELOPMENT OF A FORECASTING MODEL

    by A. Shegetaeva, N. Smakova, A. Tulegulov, A. Sterenhartz, А. Штеренхарц

    This paper presents an algorithm for multi-factored forecasting of network vulnerabilities based on data analysis from the CVE (Common Vulnerabilities and Exposures) database. The goal of the research is to develop and implement a model capable of not only detecting existing vulnerabilities but also predicting their future occurrence using formal methods and machine learning. The authors conduct an overview and comparative analysis of modern forecasting methods, including statistical approaches, machine learning algorithms (specifically Random Forest), clustering, and artificial intelligence methods. As part of the study, a forecasting program was developed, which uses data on vulnerability types, severity levels (CVSS), software, and the year of detection. The model, based on the Random Forest algorithm, demonstrated high forecasting accuracy (94.14%). The results were visualized in the form of graphs and charts, reflecting the dynamics and distribution of vulnerabilities by year and software categories. The results of the work confirm the effectiveness of the proposed approach and demonstrate its potential application in cybersecurity systems for early threat detection. In the future, it is planned to integrate more complex models, account for new factors, and create a system for automatic threat notifications.

  • Open Access

    AUTOMATION OF SELECTION OF CONSTRUCTION MIX WITH ADDITIVES OF TECHNOGENIC RAW MATERIALS

    by K. Akishev, Zh. Nurtai, L. Akisheva, А. Тulegulov, B. Biibosunov, М. Baizharikova

    Today, there are a large number of programs (calculators) on the market for calculating concrete mixtures, proportions, and composition, all of which somehow calculate only traditional mixtures consisting of cement, sand, and crushed stone. Stocks of traditional raw materials are being depleted, while the amount of man-made raw materials is growing. In this regard, the additives of man-made raw materials in the composition of building mixes are increasing from year to year, which suggests that the need for them is in demand. Unfortunately, the composition of the construction mix with additives of man-made raw materials is still determined only manually, followed by calculating the mass of an ingredient, without taking into account the density of the material. In this regard, the relevance of the study lies in the need to automate the process of selecting a building mix with additives of man-made raw materials. Considering that the problem is not only practical, but also scientific, interest in it is quite high. The purpose of the research is to develop a methodology for an automated system for selecting building mixes with additives from man-made raw materials based on the use of information technology. The developed program allows you to select the composition of the construction mix, which includes man-made raw materials (metallurgical slag, bauxite sludge, fly ash). Calculation results: optimal composition of the construction mix, weight, total cost of the construction mix in tenge. The calculation results are displayed in Excel form. The parameters cost, density, and number of ingredients of the construction mix can be updated using artificial intelligence technologies. The program allows you to analyze calculation data based on visualization in the form of graphs, diagrams, and subsequent management decisions. The resulting compositions of building mixes need laboratory experiments, depending on the purpose. The efficiency of using the developed program ensures the selection of a large number of building mix formulations that are simply not possible to perform manually. The scientific novelty of the developed program consists in the development of an original algorithm and the absence of analogues of the source code, which allows obtaining both practical and scientific results. The developed program "Automated system for selecting the composition of a building mix with additives from man-made raw materials" can be used for practical purposes in business processes of small and medium-sized businesses, during scientific experiments (master's degree, doctoral degree), in the educational process of the educational program "Information Technology", Automation and Control, "Building Materials".

  • Open Access

    The impact of blockchain and artificial intelligence technologies in network security for e-voting

    by Jumagaliyeva Ainur, Muratova Gulzhan, Tulegulov Amandos, Rystygulova Venera, Serimbetov Bulat, Yersultanova Zauresh, Shegetayeva Aizhan

    This study explored the integration of blockchain and artificial intelligence technologies to enhance the security framework of electronic voting (e-voting) systems. Amid increasing vulnerabilities and cyber threats to electoral integrity, these technologies provided robust solutions by ensuring the immutability of voting records and enabling real-time anomaly detection. Blockchain technology secured votes in a decentralized, tamper-proof ledger, preventing unauthorized modifications, and enhancing transparency. Concurrently, artificial intelligence leveraged predictive analytics to dynamically monitor and respond to potential security threats, thereby ensuring the reliability and integrity of the voting process. This paper presented a dual-technology approach where blockchain’s transparency complemented artificial intelligence’s (AI) threat detection capabilities, providing a comprehensive security solution for e-voting systems. Through theoretical models and empirical data, we demonstrated significant improvements in transaction throughput, threat detection accuracy, and system scalability. The findings suggested that the strategic application of these technologies could substantially mitigate current e-voting vulnerabilities, offering a pathway to more secure, transparent, and efficient electoral processes globally.