Yunxiang Jia
Yunxiang Jia has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Honglei Chang
School of Qilu Transportation, Shandong University, Jinan 250002, China
1 shared publication - Jian Liu
Earthquake Engineering Research & Test Center, Guangzhou University, Guangzhou, 510405, China
1 shared publication - Mahmoud Mohammed Ahmed Khodeir
Beihang University,School of Electronic and Information Engineering,Beijing,China
1 shared publication - Pan Feng
School of Materials Science and Engineering, Southeast University, Nanjing 211189, China
1 shared publication - Shaowei Li
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
1 shared publication - Xiaolong Wang
School of Energy and Mining Engineering, China University of Mining and Technology, Beijing 100083, China
1 shared publication
Latest Publications
- 23 July 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 95, 110262
Influence of low vacuum and high temperature condition on moisture transport and dry shrinkage of mature concrete
- 23 July 2024
- Published by Elsevier in Journal of Building Engineering
- Vol. 95, 110262
Influence of low vacuum and high temperature condition on moisture transport and dry shrinkage of mature concrete
- 20 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A Horn-Tip Ultrawideband E-Probe for Radiated EMI Measurements Up To 50 GHz
Based on a new Horn-Tip structure, this paper introduces a new design for an ultrawideband electric field probe working from 10 kHz up to 50 GHz for better Electromagnetic Compatibility EMC and diagnosis of Electromagnetic Interference EMI. The tip design is based on a Horn shape to enhance and improve the probe efficiency and sensitivity. The probe has been designed on a 4-layer PCB. The probe is divided into 3-parts, the induction part which has the horn-tip structure, the transmission part which is designed by a stripline structure using high-performance dielectrics “Rogers RO4003 (tm)” and “RO4450” with relative permittivity ε r 3.55 and 3.3 respectively, and the output part. The probe length is 60 mm with a minimum tip width of 4 mm which is suitable for the narrow and complex PCBs. The stripline transmission part is designed with a slope structure to achieve a good field distribution and enhance impedance matching, resulting in ultra-wide bandwidth scanning. The transfer gain sensitivity is −20 dB at 9 GHz which is about 6 dB higher than some referenced and introduced probes. The spatial resolution is a very narrow result of 0.58 mm when the probe is 0.3 mm above the DUT.
- 20 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
A Horn-Tip Ultrawideband E-Probe for Radiated EMI Measurements Up To 50 GHz
Based on a new Horn-Tip structure, this paper introduces a new design for an ultrawideband electric field probe working from 10 kHz up to 50 GHz for better Electromagnetic Compatibility EMC and diagnosis of Electromagnetic Interference EMI. The tip design is based on a Horn shape to enhance and improve the probe efficiency and sensitivity. The probe has been designed on a 4-layer PCB. The probe is divided into 3-parts, the induction part which has the horn-tip structure, the transmission part which is designed by a stripline structure using high-performance dielectrics “Rogers RO4003 (tm)” and “RO4450” with relative permittivity ε r 3.55 and 3.3 respectively, and the output part. The probe length is 60 mm with a minimum tip width of 4 mm which is suitable for the narrow and complex PCBs. The stripline transmission part is designed with a slope structure to achieve a good field distribution and enhance impedance matching, resulting in ultra-wide bandwidth scanning. The transfer gain sensitivity is −20 dB at 9 GHz which is about 6 dB higher than some referenced and introduced probes. The spatial resolution is a very narrow result of 0.58 mm when the probe is 0.3 mm above the DUT.