Tianli Li

This paper investigates the finite-time-trajectory tracking control of a robotic manipulator subject to time-varying output constraints and unknown lumped disturbances consisting of model uncertainties and external forces. A novel finite-time integral barrier Lyapunov function (FT-IBLF) with an adjustable parameter is constructed. Its barrier property and fractional-power finite-time inequality are established, which ensures that the position tracking error is strictly limited within the preset time-varying constraint boundary. Secondly, a backstepping-based finite-time tracking controller is designed, in which a finite-time disturbance observer is incorporated to estimate the lumped disturbance and compensate for it in a feedforward manner, thereby reducing the dependence on exact model information. Finally, simulations demonstrate that the proposed method can converge the tracking error to the neighborhood of zero within a finite time, and the system state never violates the constraint boundary. The dynamic performance of the system can be flexibly adjusted and optimized by adjusting parameters, which also verifies the effectiveness and superiority of this method.

A fixed-time sliding mode controller based on an adaptive neural network is developed for the path tracking problem of robotic manipulators with model uncertainty and external nonlinear interference. Firstly, a fixed-time sliding surface and sliding mode reaching law are designed based on the dynamic model of the robotic manipulator, which ensures that the error signal converges along the sliding surface within a fixed time. The speed of the state approaching the sliding surface can be flexibly adjusted through the reaching law, and it has strong robustness to parameter perturbations and external disturbances. Then, the uncertainty of model parameters and external disturbances is regarded as composite interference, and an adaptive neural network is utilized to approximate the disturbance online for adaptive fitting. This does not require precise modelling, the control input jitter is reduced, the composite disturbance is compensated in real time, and the system tracking accuracy is improved. Subsequently, the fixed-time stability characteristics of the closed-loop system are demonstrated through Lyapunov stability theory. Finally, the effectiveness and robustness of the proposed control strategy are verified through simulation.

This article studies an event-triggered fixed-time trajectory tracking control problem of an n-joint manipulator system. Firstly, a fixed-time disturbance observer is proposed to reconstruct the total disturbance composed of external disturbances and model uncertainties, using the estimation as feedforward compensation to enhance the system robustness. Subsequently, based on the backstepping framework, a fixed-time controller with an event-triggering mechanism is designed for the manipulator to ensure the convergence of tracking errors to zero within a fixed time. Additionally, two event-triggering conditions are devised to reduce the transmission time of control input and the computation time of control output. Simultaneously, Zeno behavior is excluded through theoretical proof, validating the fixed-time stability of the closed-loop system. Finally, simulation verification is conducted on a two-joint manipulator, with results confirming the effectiveness of the control strategy.

This article presents an adaptive neural network (ANN) control scheme based on a disturbance observer that can achieve trajectory tracking control of robotic manipulators under external disturbances and dynamic model uncertainties. Firstly, an ANN controller based on full-state feedback is derived using the backstepping technique to achieve an online approximation of uncertainty. The integral sliding mode surface with a position error is introduced into the controller, which reduces the steady-state error of the system and enhances robustness. Then, a novel disturbance observer is designed to estimate both the approximation errors of the ANN and external disturbances, and to provide compensation for the controller, effectively suppressing the trajectory tracking errors caused by approximation errors and disturbances. Subsequently, the Lyapunov stability theory is utilized to demonstrate the stability of the developed control strategy and the boundedness of all closed-loop signals. Finally, numerical simulations are used to confirm the efficacy of the proposed control method.

Backstepping-based fixed-time tracking control is proposed for a robotic arm system to solve the problem of trajectory tracking control under system uncertainties, which ensures the robotic arm system can realize stable tracking control within a fixed time independent of the initial state of the system. In addition, to address the uncertainties in the robotic arm system, a control strategy based on disturbance observer compensation is designed, which provides feed-forward compensation through the accurate estimation of the system uncertainties and enhances the system’s robustness. Finally, a two-link robotic arm model is used for simulation experiments, and the comparison results show that the control scheme designed in this article can effectively improve the robotic arm’s tracking accuracy and convergence speed.