Arifin Nur

Biogas from palm oil mill effluent (POME) is a promising fuel that has many advantages as an alternative fuel. The methane content in biogas derived from POME is up to 75% and can be used as an alternative fuel in an internal combustion engine. One of the technologies for utilizing biogas in compression ignition engines is the Diesel Dual-Fuel (DDF) technique due to the different characteristics of fuel and the impact on the environment due to significantly reducing emissions. This study aims to find the effect of biogas POME composition and energy ratio on the DDF engine’s performance and emissions. The simulations using AVL BOOST software were confirmed by experimental engine parameters. The modeling was conducted on the biogas energy ratio (20%, 40%, 60%, and 75% POME) and biogas POME composition (55% and 75% methane). The results showed that the fuel consumption of diesel fuel was reduced by up to 69%, and NO_x and soot emissions were reduced by up to 92% and 80%, respectively, with dual-fuel mode operation. Meanwhile, the value of brake mean effective pressure (BMEP) and efficiency was reduced by up to 18%, volumetric efficiency decreased by up to 4%, the increase in brake specific energy consumption (BSEC) was up to 23%, and brake specific fuel consumption (BSFC) was up to 155%. The optimum of the engine’s performance and emission was 40% biogas ratio with 75% methane content.

Air pollution remains a big issue in many countries. One form of air pollution comes from the use of fossil fuels as the primary fuel in the power generating and transportation sectors. Diesel engines are employed in a variety of industries due to their dependability, durability, and efficiency. Enhancing the availability of oxygen within the combustion chamber is one technique for reducing exhaust gas emissions and optimizing diesel engine combustion. The aim of this study is to investigate how oxygen enrichment in diesel engines with diesel fuel and biodiesel affects their performance and emissions. The modeling in this research was carried out using AVL BOOST version 2011 software based on experimental results of the YANMAR TF 155 R-DI diesel engine at 1200 rpm with and without oxygen enrichment. Modeling was performed based on the baseline parameter of a diesel engine with gradual loads at 50%, 75%, and 100%. The oxygen concentration was increased to 30.6%, 37.8%, 45%, and 54% by mass. The results show an increase in the maximum heat release rate (HRR) and the mass fraction burned (MFB) up to 90% for both fuels. The peak heat release rate of biodiesel shifts around 6 J/degree and the brake-specific fuel consumption (BSFC) is up to 0.0035 kg/kWh higher than that of diesel fuel. When compared to diesel fuel, the thermal efficiency and BSFC of biodiesel usage are around 0.3% and 0.028 kg/kWh, respectively. NO_x emissions increase due to higher combustion temperatures and more oxygen availability. Biodiesel emits 50% less NO_x than diesel fuel, presumably due to a lower combustion temperature. As a result, while high-concentration oxygen enrichment improves combustion and lowers soot emissions, it raises NO_x emissions. Soot emissions were reduced as a result of the enhanced combustion process, while NO_x emissions rose due to higher combustion temperatures and increased oxygen availability.