Zhao-Hong Qiu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhao-Hong Qiu has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
- Yen-Shin Lai
Center for Power Electronics Technology, National Taipei University of Technology, Taipei, Taiwan
2 shared publications
Latest Publications
- 28 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (12) , 12231-12241
Rapid Prototyping of Digital Twins Control System for IPM Drives Considering Both Saturation and Spatial Harmonics to Achieve Fast Development and Accurate Emulation
A rapid prototyping of digital twins control system for interior permanent magnet (IPM) drives system based-up model-in-the-loop (MIL), software-in-the-loop (SIL), and hardware-in-the-loop (HIL) is proposed in this article. Both motor saturation and spatial harmonics are considered in the proposed digital twins control system to achieve accurate emulation while providing fast prototyping to shorten the cost and development time significantly. First, the motor drives system, including designedmotor, inverter and drives control, is fully verified based upon MIL, SIL and HIL, respectively. Both saturation and spatial harmonics of motor are considered in the MIL by including the 3-D equivalent circuit extraction (ECE) model of ANSYS. Based upon this motor model, the drives control method is developed and verified using SIL. Then the control code generated automatically by SIL to dramatically reduce the error of programming and debug time is downloaded to the digital signal processor (DSP)-based HIL platform. Both motor and inverter models are included in the HIL platform for the verification of designed controllers and control code. Finally, the verified motor drives control code is used to drive the real motor drives system. The proposed rapid prototyping of digital twins control system for IPMdrives systemis validated using a 2 kW IPM drives system for electrical scooter application. The experimental results show very accurate consistence between the proposed system and real system. The maximum deviation in between is 0.99% under half speed and full load condition. These results demonstrate fast prototyping and accurate emulation can be achieved. The proposed rapid prototyping of digital twins control system can be applied to any motor, not limited to the illustrated interior permanent magnet synchronous motors (IPMSM) drives.
- 28 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (12) , 12231-12241
Rapid Prototyping of Digital Twins Control System for IPM Drives Considering Both Saturation and Spatial Harmonics to Achieve Fast Development and Accurate Emulation
A rapid prototyping of digital twins control system for interior permanent magnet (IPM) drives system based-up model-in-the-loop (MIL), software-in-the-loop (SIL), and hardware-in-the-loop (HIL) is proposed in this article. Both motor saturation and spatial harmonics are considered in the proposed digital twins control system to achieve accurate emulation while providing fast prototyping to shorten the cost and development time significantly. First, the motor drives system, including designedmotor, inverter and drives control, is fully verified based upon MIL, SIL and HIL, respectively. Both saturation and spatial harmonics of motor are considered in the MIL by including the 3-D equivalent circuit extraction (ECE) model of ANSYS. Based upon this motor model, the drives control method is developed and verified using SIL. Then the control code generated automatically by SIL to dramatically reduce the error of programming and debug time is downloaded to the digital signal processor (DSP)-based HIL platform. Both motor and inverter models are included in the HIL platform for the verification of designed controllers and control code. Finally, the verified motor drives control code is used to drive the real motor drives system. The proposed rapid prototyping of digital twins control system for IPMdrives systemis validated using a 2 kW IPM drives system for electrical scooter application. The experimental results show very accurate consistence between the proposed system and real system. The maximum deviation in between is 0.99% under half speed and full load condition. These results demonstrate fast prototyping and accurate emulation can be achieved. The proposed rapid prototyping of digital twins control system can be applied to any motor, not limited to the illustrated interior permanent magnet synchronous motors (IPMSM) drives.
- Open Access
- 8 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 146185-146193
New On-Line MTPA Angle Search and Control Methods Based on Digital Twins for IPM Synchronous Motor Drives Considering Motor Non-Linearity
The main theme of this paper is to propose on-line MTPA angle search and control methods based on digital twins for IPM synchronous motor drives. The proposed method is developed based upon the ECE model, the finite element model of IPM synchronous motor. An on-line MTPA angle search method is developed to achieve the minimization of stator current for the specific output torque and speed. A new IPM synchronous motor control is proposed based upon its digital twins model to consider the non-linearity caused by magnetic saturation of motor which become more relevant especially under heavy load conditions. In the proposed IPM synchronous motor control method, two current controllers and the parameters for decoupling control are tuned on-line to adapt to the variation of motor parameters caused by the non-linearity of motor. Experiment results are shown to support the proposed methods. The motor for the application of electrical scooter with the rated specifications of 2 kW, 2000 rpm, 10 Nm, is used for test and comparison. Comparing with the conventional methods, the test results show the stator current can be reduced up to 17.23 % under 2000 rpm and half load conditions. The efficiency improvement is up to 3.18 %. These results fully confirm the effectiveness of the proposed on-line MTPA angle search and control methods.
- 8 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 146185-146193
Open AccessNew On-Line MTPA Angle Search and Control Methods Based on Digital Twins for IPM Synchronous Motor Drives Considering Motor Non-Linearity
The main theme of this paper is to propose on-line MTPA angle search and control methods based on digital twins for IPM synchronous motor drives. The proposed method is developed based upon the ECE model, the finite element model of IPM synchronous motor. An on-line MTPA angle search method is developed to achieve the minimization of stator current for the specific output torque and speed. A new IPM synchronous motor control is proposed based upon its digital twins model to consider the non-linearity caused by magnetic saturation of motor which become more relevant especially under heavy load conditions. In the proposed IPM synchronous motor control method, two current controllers and the parameters for decoupling control are tuned on-line to adapt to the variation of motor parameters caused by the non-linearity of motor. Experiment results are shown to support the proposed methods. The motor for the application of electrical scooter with the rated specifications of 2 kW, 2000 rpm, 10 Nm, is used for test and comparison. Comparing with the conventional methods, the test results show the stator current can be reduced up to 17.23 % under 2000 rpm and half load conditions. The efficiency improvement is up to 3.18 %. These results fully confirm the effectiveness of the proposed on-line MTPA angle search and control methods.