Silin Tang
Silin Tang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Yingzhi Meng
5 shared publications- Laijun Liu
Key Laboratory of New Processing Technology for Nonferrous Metal & Materials (MOE), College of Materials Science and Engineering, Guilin University of Technology, Guilin 541006, China
4 shared publications Qingqing Ke
4 shared publicationsBiaolin Peng
2 shared publicationsGuoxiang Zhang
2 shared publications- Martin Wiedmann
Department of Food Science, Cornell University
2 shared publications
Latest Publications
- Open Access
- 30 March 2026
- Published by OAE Publishing Inc. in Microstructures
- Vol. 6 (1)
Microstructure-engineered electrocaloric P(VDF-TrFE-CFE) terpolymer-based nanocomposites with enhanced interfacial coupling for rapid thermal switching
Electrocaloric (EC) cooling represents a promising solid-state approach for next-generation thermal management. However, achieving substantial temperature modulation remains a challenge due to intrinsic material limitations and inefficient energy conversion. Herein, we focus on microstructure regulation to enhance thermal conductivity and EC performance. A hydroxyl-functionalized Ba0.63Sr0.37Zr0.01(Ti0.999Mn0.001)0.99O3 (BSZMT-OH) and h-BNNS-OH composite was designed, with enhanced interfacial hydrogen bonding to optimize electric field response in a P(VDF-TrFE-CFE) matrix. Finite element analysis (FEA) and piezo response force microscopy (PFM) reveal strengthened interfacial coupling, which facilitates rapid domain switching kinetics by amplifying tetragonal P4mm phase responses. These enhancements yield a peak EC temperature change (ΔT) of 1.59 K under a low electric field of 40 MV/m in the optimized 6% BSZMT-OH@4 h-BNNS-OH (6@4BNNS) composite. Integrated into a double-layer four-section electrocaloric cooling (DL 4 EC) device, it cools from 70 to 23 °C in 23 s, outperforming water cooling. Our findings offer insights into EC mechanisms and present a high-performance thermal management strategy.
- 30 March 2026
- Published by OAE Publishing Inc. in Microstructures
- Vol. 6 (1)
Open AccessMicrostructure-engineered electrocaloric P(VDF-TrFE-CFE) terpolymer-based nanocomposites with enhanced interfacial coupling for rapid thermal switching
Electrocaloric (EC) cooling represents a promising solid-state approach for next-generation thermal management. However, achieving substantial temperature modulation remains a challenge due to intrinsic material limitations and inefficient energy conversion. Herein, we focus on microstructure regulation to enhance thermal conductivity and EC performance. A hydroxyl-functionalized Ba0.63Sr0.37Zr0.01(Ti0.999Mn0.001)0.99O3 (BSZMT-OH) and h-BNNS-OH composite was designed, with enhanced interfacial hydrogen bonding to optimize electric field response in a P(VDF-TrFE-CFE) matrix. Finite element analysis (FEA) and piezo response force microscopy (PFM) reveal strengthened interfacial coupling, which facilitates rapid domain switching kinetics by amplifying tetragonal P4mm phase responses. These enhancements yield a peak EC temperature change (ΔT) of 1.59 K under a low electric field of 40 MV/m in the optimized 6% BSZMT-OH@4 h-BNNS-OH (6@4BNNS) composite. Integrated into a double-layer four-section electrocaloric cooling (DL 4 EC) device, it cools from 70 to 23 °C in 23 s, outperforming water cooling. Our findings offer insights into EC mechanisms and present a high-performance thermal management strategy.
- 23 September 2025
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1041
Dual-layer thin-film electrocaloric cooler with low-voltage for self-driven heat transfer application
- 23 September 2025
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1041
Dual-layer thin-film electrocaloric cooler with low-voltage for self-driven heat transfer application
- 28 December 2024
- Published by Elsevier in Ceramics International
- Vol. 51 (8) , 10174-10183
Selective forming process for microstructures engineering of BST-based ceramics to achieve promoted electrocaloric performance
- 28 December 2024
- Published by Elsevier in Ceramics International
- Vol. 51 (8) , 10174-10183
Selective forming process for microstructures engineering of BST-based ceramics to achieve promoted electrocaloric performance
- Open Access
- 22 June 2024
- Published by Elsevier in Journal of Materiomics
- Vol. 11 (3) , 100903
Significantly enhanced electrocaloric effect by composition modulation in lead-free BaTiO3-based ceramics
- 22 June 2024
- Published by Elsevier in Journal of Materiomics
- Vol. 11 (3) , 100903
Open AccessSignificantly enhanced electrocaloric effect by composition modulation in lead-free BaTiO3-based ceramics
- 29 December 2023
- Published by Elsevier in Ceramics International
- Vol. 50 (7) , 10825-10834
Achieving improved electrocaloric effect and broad operation temperature by tailoring phase fraction in BaTiO3-based ceramics
- 29 December 2023
- Published by Elsevier in Ceramics International
- Vol. 50 (7) , 10825-10834
Achieving improved electrocaloric effect and broad operation temperature by tailoring phase fraction in BaTiO3-based ceramics
- Open Access
- 1 June 2020
- Published by Elsevier in Journal of Food Protection
- Vol. 83 (6) , 1030-1037
Extended Enrichment Procedures Can Be Used To Define False-Negative Probabilities for Cultural Gold Standard Methods for Salmonella Detection, Facilitating Comparisons between Gold Standard and Alternative Methods
Evaluation of alternative detection methods for foodborne pathogens typically involves comparisons against a “gold standard” culture method, which may produce false-negative (FN) results, particularly under worst-case scenarios such as low contamination levels, difficult-to-detect strains, and challenging food matrices (e.g., matrices with a water activity of Salmonella detection (the U.S. Food and Drug Administration Bacteriological Analytical Manual [BAM] method) in two low-water-activity foods (dry pet food and chocolate) inoculated at low contamination levels (most probable number ca. 1/25 g) with five Salmonella strains. Strains were selected to include those with a poor ability to grow in enrichment media. Among the 100 pet food and 100 chocolate samples tested, 53 and 50, respectively, were positive with the standard BAM method, and 57 and 59, respectively, were positive with the extended BAM method. Thus, the FN probabilities for the standard BAM method were 7% for pet food and 15% for chocolate. An alternative enzyme immunoassay method for detection of Salmonella in chocolate produced FN probabilities of 6 and 20% when compared against the standard and extended BAM methods, respectively. Detection of Salmonella Mississippi was significantly reduced with the alternative method (P = 0.023) compared with the extended BAM method. We calculated a composite reference standard to further define FN probabilities based on variable results from multiple assays (the standard BAM, extended BAM, and alternative methods). Based on this standard, the enzyme immunoassay for Salmonella detection in chocolate had a 28% FN probability and the standard and extended BAM methods had 23 and 9% FN probabilities, respectively. These results provide a framework for how inclusion of extended enrichment times can facilitate evaluation of alternative detection methods. Worst-case conditions provide for stringent evaluation of detection methods. Extended enrichment can assess FN probabilities of culture methods. BAM methods can have up to a 15% FN probability.
- 1 June 2020
- Published by Elsevier in Journal of Food Protection
- Vol. 83 (6) , 1030-1037
Open AccessExtended Enrichment Procedures Can Be Used To Define False-Negative Probabilities for Cultural Gold Standard Methods for Salmonella Detection, Facilitating Comparisons between Gold Standard and Alternative Methods
Evaluation of alternative detection methods for foodborne pathogens typically involves comparisons against a “gold standard” culture method, which may produce false-negative (FN) results, particularly under worst-case scenarios such as low contamination levels, difficult-to-detect strains, and challenging food matrices (e.g., matrices with a water activity of Salmonella detection (the U.S. Food and Drug Administration Bacteriological Analytical Manual [BAM] method) in two low-water-activity foods (dry pet food and chocolate) inoculated at low contamination levels (most probable number ca. 1/25 g) with five Salmonella strains. Strains were selected to include those with a poor ability to grow in enrichment media. Among the 100 pet food and 100 chocolate samples tested, 53 and 50, respectively, were positive with the standard BAM method, and 57 and 59, respectively, were positive with the extended BAM method. Thus, the FN probabilities for the standard BAM method were 7% for pet food and 15% for chocolate. An alternative enzyme immunoassay method for detection of Salmonella in chocolate produced FN probabilities of 6 and 20% when compared against the standard and extended BAM methods, respectively. Detection of Salmonella Mississippi was significantly reduced with the alternative method (P = 0.023) compared with the extended BAM method. We calculated a composite reference standard to further define FN probabilities based on variable results from multiple assays (the standard BAM, extended BAM, and alternative methods). Based on this standard, the enzyme immunoassay for Salmonella detection in chocolate had a 28% FN probability and the standard and extended BAM methods had 23 and 9% FN probabilities, respectively. These results provide a framework for how inclusion of extended enrichment times can facilitate evaluation of alternative detection methods. Worst-case conditions provide for stringent evaluation of detection methods. Extended enrichment can assess FN probabilities of culture methods. BAM methods can have up to a 15% FN probability.
- 1 December 2015
- Published by SAGE Publications in Foodborne Pathogens and Disease
- Vol. 12 (12) , 972-982
Clonal Clustering Using 10-Gene Multilocus Sequence Typing Reveals an Association Between Genotype and Listeria monocytogenes Maximum Growth Rate in Defined Medium
We used a 10-gene (10G) multilocus sequence typing scheme to investigate the diversity and phylogenetic distribution of 124 Listeria monocytogenes strains across major lineages, major serotypes, and seven epidemic clones that have been previously associated with outbreaks. The 124 isolates proved to be diverse, with a total of 81 sequence types (10G-STs) belonging to 13 clonal complexes (CCs), where all STs of the same CC differ from one another in up to 3 of the 10 alleles (named as 10G-triple-locus-variant-clonal-complexes [10G-TLV-CCs]). Phenotypic characterization for 105 of the 124 strains showed that L. monocytogenes had variable maximum growth rate (μ max ) in a defined medium at 16°C, and classification by lineage or serotype was not able to reflect the genetic basis for the difference of this phenotype. Among the six major 10G-TLV-CCs, 10G-TLV-CC4 that included lineage I strains had significantly lower μ max (Tukey honestly significant difference adjusted [adj.] p < 0.05) compared to 10G-TLV-CC1 and 10G-TLV-CC3 that both comprised lineage II strains, indicating a distinct difference in growth of these L. monocytogenes isolates under nutrient-limited conditions among some of the CCs. However, the other three (10G-TLV-CC2, 6, and 10) of the six major 10G-TLV-CCs containing either lineage I or lineage II strains did not show significantly different μ max compared to the others (adj. p < 0.05). Our findings highlighted the importance of using molecular typing methods that can be used in evolutionary analyses as a framework for further understanding the phenotypic characteristics of subgroups of L. monocytogenes .
- 1 December 2015
- Published by SAGE Publications in Foodborne Pathogens and Disease
- Vol. 12 (12) , 972-982
Clonal Clustering Using 10-Gene Multilocus Sequence Typing Reveals an Association Between Genotype and Listeria monocytogenes Maximum Growth Rate in Defined Medium
We used a 10-gene (10G) multilocus sequence typing scheme to investigate the diversity and phylogenetic distribution of 124 Listeria monocytogenes strains across major lineages, major serotypes, and seven epidemic clones that have been previously associated with outbreaks. The 124 isolates proved to be diverse, with a total of 81 sequence types (10G-STs) belonging to 13 clonal complexes (CCs), where all STs of the same CC differ from one another in up to 3 of the 10 alleles (named as 10G-triple-locus-variant-clonal-complexes [10G-TLV-CCs]). Phenotypic characterization for 105 of the 124 strains showed that L. monocytogenes had variable maximum growth rate (μ max ) in a defined medium at 16°C, and classification by lineage or serotype was not able to reflect the genetic basis for the difference of this phenotype. Among the six major 10G-TLV-CCs, 10G-TLV-CC4 that included lineage I strains had significantly lower μ max (Tukey honestly significant difference adjusted [adj.] p < 0.05) compared to 10G-TLV-CC1 and 10G-TLV-CC3 that both comprised lineage II strains, indicating a distinct difference in growth of these L. monocytogenes isolates under nutrient-limited conditions among some of the CCs. However, the other three (10G-TLV-CC2, 6, and 10) of the six major 10G-TLV-CCs containing either lineage I or lineage II strains did not show significantly different μ max compared to the others (adj. p < 0.05). Our findings highlighted the importance of using molecular typing methods that can be used in evolutionary analyses as a framework for further understanding the phenotypic characteristics of subgroups of L. monocytogenes .