ECEmmet Coleman

Emmet Coleman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Emmet Coleman has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Decoupling Junction and Nanosheet Transport in Graphene Networks via Simple DC Temperature‐Dependent Measurements

    by Emmet Coleman, Luke Doolan, Anthony Dawson, Eoin Caffrey, Cian Gabbett, Weimiao Wang, Kevin Synnatschke, Jagdish K. Vij, Jonathan N. Coleman

    Printed nanosheet networks are important for various applications in electronics, sensing, and energy storage. Understanding charge transport in such systems requires separately assessing the contributions of both the nanosheets themselves as well as the inter‐nanosheet junctions. However, achieving this using standard electrical characterization methods can be challenging. Here, a broadly applicable method is presented for the separation and extraction of the temperature‐dependent junction resistance ( R J ) and nanosheet resistivity ( ρ NS ) by combining a simple theoretical model with temperature‐dependent resistivity measurements on networks fabricated using different nanosheet sizes. R J is found to be the bottleneck for transport in networks composed of large, thick nanosheets, whereas ρ NS begins to dominate in networks composed of smaller, thinner nanosheets. The extracted ρ NS shows weak temperature dependence consistent with semiconducting behavior arising from a mixture of Bernal and rhombohedral layer stacking. R J exhibits a power–law dependence which is best described by inter‐sheet hopping via delocalized states just above a disorder‐induced mobility edge. This approach enables simultaneous quantification of junction and nanosheet transport in any nanomaterial network. It provides a simple yet powerful method to achieve an extensive understanding of the transport mechanisms, facilitating the design of optimized printed electronic devices.


  • Open Access

    Electronic properties and circuit applications of networks of electrochemically exfoliated 2D nanosheets

    by Tian Carey, Kevin Synnatschke, Goutam Ghosh, Luca Anzi, Eoin Caffrey, Emmet Coleman, Changpeng Lin, Anthony Dawson, Shixin Liu, Rebekah Wells, et al.

    High aspect-ratio 2D materials are promising for solution-processed electronics, yet the factors controlling exfoliation remain unclear and relatively few solution-processed networks have been electrically characterized. Here we combine theory and experiment to show that electrochemical exfoliation of layered crystals with sufficient stiffness-anisotropy (in-plane/out-of-plane Young’s modulus ratio >1.7) yields high aspect-ratio nanosheets with intrinsic mobilities μ NS = 20–75 cm²V⁻¹s⁻¹ across transition metal dichalcogenides and related alloys. Impedance spectroscopy indicates that solution-deposited networks can achieve junction-to-nanosheet resistance ratios (RJ/RNS) as low as ~3, supporting theoretical predictions that μ NS/μ Net = RJ/RNS + 1 and suggesting that further reductions in RJ will increase μNet toward the nanosheet limit (μ NS). These networks display n-type, p-type, and ambipolar behaviour, with on/off ratios up to 10⁵ and mobilities μ Net = 13 cm²V⁻¹s⁻¹. Here, we show that such high-performing 2D materials enable functional solution-processed circuits, including inverters, buffers, a 4-bit digital-to-analog converter, and a circuit capable of encoding and decoding 7-bit ASCII messages.


  • Open Access

    Electronic properties and circuit applications of networks of electrochemically exfoliated 2D nanosheets

    by Jonathan Coleman, Tian Carey, Kevin Synnatschke, Goutam Ghosh, Luca Anzi, Eoin Caffrey, Emmet Coleman, Changpeng Lin, Anthony Dawson, Shixin Liu, et al.

    High aspect-ratio 2D materials offer promise for solution-processed electronics. However, the factors controlling exfoliation are unclear while solution-processed networks have been electrically characterized for relatively few materials. This study combines theory and experimentation to show that electrochemical exfoliation of various layered crystals with sufficient stiffness-anisotropy (Ein/Eout>1.7) produces high aspect-ratio nanosheets with intrinsic mobilities of μNS=20–75 cm²V⁻¹s⁻¹ (MoS2, WS2, WSe2, MoSe2, PtSe2, MoWSe2, MoSe2:Nb and WSe2:Nb). Impedance spectroscopy indicates that solution-deposited networks of these nanosheets have a junction-to-nanosheet resistance ratio (RJ/RNS) as low as ~3 (MoS2). These networks display n-type (PtSe2, WS2, MoS2), p-type (InTe, GaTe, MoSe2:Nb, WSe2:Nb, Tellurene, Black Phosphorus), and ambipolar behaviour (WMoSe2, MoSe2, WSe2, MoTe2), with on/off ratios and mobilities up to 10⁵ and μNet=13 cm²V⁻¹s⁻¹ respectively. Network properties are consistent with theoretical predictions that μNS/μNet=RJ/RNS+1, suggesting that further reductions in RJ will increase μNet toward the nanosheet limit (μNS). High-performing 2D materials were used to create functional circuits (WMoSe2 and WS2) including inverters, buffers, a 4-bit digital-to-analog converter, and a circuit capable of encoding and decoding 7-bit ASCII messages.

  • Open Access

    Extracting the Temperature Dependence of Both Nanowire Resistivity and Junction Resistance from Electrical Measurements on Printed Silver Nanowire Networks

    by Emmet Coleman, Adam Kelly, Cian Gabbett, Luke Doolan, Shixin Liu, Neelam Yadav, Jagdish K. Vij, Jonathan N. Coleman

    Printed networks of nanoparticles (e.g., nanodots, nanowires, nanosheets) are important for a range of electronic, sensing and energy storage applications. Characterizing the temperature dependence of both the nanoparticle resistivity (ρNW) and interparticle junction resistance (R J) in such networks is crucial for understanding the conduction mechanism and so for optimizing network properties. However, it is challenging to extract both ρNW and R J from standard electrical measurements. Here, using silver nanowires (AgNWs) as a model system, we describe a broadly applicable method to extract both parameters from resistivity measurements on nanowire networks. We achieve this by combining a simple theoretical model with temperature-dependent resistivity measurements on sets of networks fabricated from nanowires of different lengths. As expected, our results demonstrate that R J is the predominant bottleneck for charge transport within these networks, with R NW/R J in the range 0.03-0.7. We demonstrate that the temperature dependence of ρNW exhibits characteristic Bloch-Grüneisen behavior, yielding a Debye temperature between 133-181 K, which aligns with reported values for individual nanowires. Likewise, our findings for residual resistivity and electron-phonon coupling constants closely match published values measured on individual nanowires. The junction resistance also follows Bloch-Grüneisen behavior with similar parameters, indicating the junctions consist of metallic silver. These findings confirm the validity of our method and provide a deeper insight into the conduction mechanisms in AgNW networks. They also pave the way toward simultaneous measurement of ρNW and R J in other important systems, notably carbon nanotube networks.


  • Open Access

    Using Electrical Impedance Spectroscopy to Separately Quantify the Effect of Strain on Nanosheet and Junction Resistance in Printed Nanosheet Networks

    by Eoin Caffrey, Tian Carey, Luke Doolan, Anthony Dawson, Emmet Coleman, Zdeněk Sofer, Oran Cassidy, Cian Gabbett, Jonathan N. Coleman

    Many printed electronic applications require strain‐independent electrical properties to ensure deformation‐independent performance. Thus, developing printed, flexible devices using 2D and other nanomaterials will require an understanding of the effect of strain on the electrical properties of nano‐networks. Here, novel AC electrical techniques are introduced to fully characterize the effect of strain on the resistance of high‐mobility printed networks, fabricated from of electrochemically exfoliated MoS2 nanosheets. These devices are initially characterized using DC piezoresistance measurements and show good cyclability and a linear strain response, consistent with a low gauge factor of G ≈ 3. However, AC impedance spectroscopy measurements, performed as a function of strain, allow the measurement of the effects of strain on both the nanosheets and the inter‐nanosheet junctions separately. The junction resistance is found to increase linearly with strain, while the nanosheet resistance remains constant. This response is consistent with strain‐induced sliding of the highly‐aligned nanosheets past one another, without any strain being transferred to the sheets themselves. The approach allows for the individual estimation of the contributions of dimensional factors (G ≈ 1.4) and material factors (G ≈ 1.9) to the total gauge factor. This novel technique may provide insights into other piezoresistive systems.


  • Top Cited Papers
    Open Access

    Understanding how junction resistances impact the conduction mechanism in nano-networks

    by Cian Gabbett, Adam G. Kelly, Emmet Coleman, Luke Doolan, Tian Carey, Kevin Synnatschke, Shixin Liu, Anthony Dawson, Domhnall O’sUilleabhain, Jose Munuera, et al.

    Networks of nanowires, nanotubes, and nanosheets are important for many applications in printed electronics. However, the network conductivity and mobility are usually limited by the resistance between the particles, often referred to as the junction resistance. Minimising the junction resistance has proven to be challenging, partly because it is difficult to measure. Here, we develop a simple model for electrical conduction in networks of 1D or 2D nanomaterials that allows us to extract junction and nanoparticle resistances from particle-size-dependent DC network resistivity data. We find junction resistances in porous networks to scale with nanoparticle resistivity and vary from 5 Ω for silver nanosheets to 24 GΩ for WS2 nanosheets. Moreover, our model allows junction and nanoparticle resistances to be obtained simultaneously from AC impedance spectra of semiconducting nanosheet networks. Through our model, we use the impedance data to directly link the high mobility of aligned networks of electrochemically exfoliated MoS2 nanosheets (≈ 7 cm2 V−1 s−1) to low junction resistances of ∼2.3 MΩ. Temperature-dependent impedance measurements also allow us to comprehensively investigate transport mechanisms within the network and quantitatively differentiate intra-nanosheet phonon-limited bandlike transport from inter-nanosheet hopping.


  • Open Access

    Quantitative analysis of printed nanostructured networks using high-resolution 3D FIB-SEM nanotomography

    by Cian Gabbett, Luke Doolan, Kevin Synnatschke, Laura Gambini, Emmet Coleman, Adam G. Kelly, Shixin Liu, Eoin Caffrey, Jose Munuera, Catriona Murphy, et al.

    Networks of solution-processed nanomaterials are becoming increasingly important across applications in electronics, sensing and energy storage/generation. Although the physical properties of these devices are often completely dominated by network morphology, the network structure itself remains difficult to interrogate. Here, we utilise focused ion beam – scanning electron microscopy nanotomography (FIB-SEM-NT) to quantitatively characterise the morphology of printed nanostructured networks and their devices using nanometre-resolution 3D images. The influence of nanosheet/nanowire size on network structure in printed films of graphene, WS2 and silver nanosheets (AgNSs), as well as networks of silver nanowires (AgNWs), is investigated. We present a comprehensive toolkit to extract morphological characteristics including network porosity, tortuosity, specific surface area, pore dimensions and nanosheet orientation, which we link to network resistivity. By extending this technique to interrogate the structure and interfaces within printed vertical heterostacks, we demonstrate the potential of this technique for device characterisation and optimisation.