Ashutosh Sahu

Polypropylene fibers possess certain characteristics that make them an ideal counterpart to attain explicit advantages when used for building works, more specifically, when added to concrete. In this investigation, polypropylene fibers were added by weight of cement (0.25%, 0.5%, and 0.75%) in M20 grade of concrete and their impact on workability, compressive strength, and flexural strength were assessed and analyzed. The slump test revealed that as the polypropylene fiber loading in the concrete mix was increased, the workability of the mixture continued to decrease; the workability decreased by 11.11%, 19.44%, and 45.83% upon the addition of 0.25 %, 0.5%, and 0.75% fibers respectively in the concrete. The compressive strength, as well as the flexural strength of the concrete, increased monotonously with an increase in the curing time and fiber loading. For instance, in the case of acidic water curing, the compressive strength enhanced from 19.08 MPa to 22.85 MPa upon increasing the fiber content from 0.25% to 0.75%. Adding 0.25% polypropylene fiber resulted in an increase in the flexural strength of conventional concrete mix by 15.78% and 10.29% when cured in normal water for 28 days and 56 days, respectively. Both the compressive and flexural strength of the samples cured in normal water was found to be higher than the samples cured in acidic water and it was observed that the fibre-reinforced concretes were more resistant to acids than the normal unreinforced concrete.

Aluminum‐based glassy alloys and composites exhibit more than two times higher tensile and compressive strength and superior corrosion resistance compared to the conventional Al alloys. However, the low glass‐forming ability (GFA) of Al‐based glass‐forming compositions restricts the synthesis of large dimension Al‐based amorphous alloys. In contrast, powder metallurgy route leads to synthesis of higher‐dimension Al‐based metallic glasses and composites. A detailed review on the efforts made to improve the dimension and mechanical properties of the Al‐based glassy alloys and composites is essential to further develop these materials for industrial applications. Researchers aspiring to develop high‐strength light‐weight materials can be benefited from such a detailed review on Al‐based amorphous alloys and composites. In this review article, a holistic approach is made to understand the GFA, crystallization behavior, corrosion resistance, and mechanical and electronic properties of Al‐based glassy alloys and composites. The effects of various alloying elements on GFA and criteria to optimize Al‐based glass‐forming alloy composition are discussed. The crystallization behavior is discussed with phase‐separation and quenched‐in nuclei models. The effects of various crystalline phases in the amorphous matrix on corrosion resistance and mechanical and electronic properties are discussed in detail.