Salmia Beddu
Salmia Beddu has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Daud Mohamad
Department of Civil Engineering, College of Engineering, Universiti Tenaga Nasional (UNITEN) Putrajaya, 43000, Kajang, Selangor, Malaysia
2 shared publications- Nur Liyana Mohd Kamal
Universiti Tenaga Nasional
2 shared publications - Teh Sabariah Binti Abd Manan
School of Civil Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Malaysia
2 shared publications Zarina Itam
Department of Civil Engineering, College of Engineering, Universiti Tenaga Nasional (UNITEN) Putrajaya, 43000, Kajang, Selangor, Malaysia
2 shared publicationsAgusril
Universiti Tenaga Nasional
1 shared publicationAgusril Syamsir
Department of Civil Engineering, Universiti Tenaga Nasional, Jalan Ikram-Uniten, Kajang, Malaysia
1 shared publication
Latest Publications
- Open Access
- 3 July 2024
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 400, 03007
A State-of-the-Art Review of Hydronic Asphalt Solar Collector Technology for Solar Energy Harvesting on Road Pavement
Nature inspires innovative renewable energy solutions by advancing our road pavements, as the sun is the only infinite and accessible source of clean and green energy on our planet. In addition to the various solar energy production methods, a new paradigm for utilizing asphalt pavement as a solar collector is being developed for self-powered energy harvesting. Due to direct solar radiation, flexible paved surfaces exposed to direct sunlight can heat up to 70°C in the summer. The heat is then dissipated into the environment, causing the urban heat island effect, and accelerating thermal oxidation of asphalt pavement. This can lead to structural failure and reduced pavement performance. This study aims to present a state-of-the-art review of hydronic asphalt solar collectors (HASCs) and propose the best model to enhance the performance of asphalt solar collectors. The findings of the study concluded that asphalt has the potential to absorb solar energy and store heat energy. This can be achieved by assembling and modifying conventional asphalt structures into modern asphalt solar collector designs that consist of pipe arrangements below the paved surface filled with liquid flowing through the pavement surface. The study found that a significant limitation of previous research was that it focused on optimizing the temperature profile at various depths but did not focus on structural improvements to reduce failure and increase the performance of asphalt solar collectors. Therefore, this review study proposed a new technique of using conductive and waste materials to enhance the performance of asphalt solar collectors.
- 3 July 2024
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 400, 03007
Open AccessA State-of-the-Art Review of Hydronic Asphalt Solar Collector Technology for Solar Energy Harvesting on Road Pavement
Nature inspires innovative renewable energy solutions by advancing our road pavements, as the sun is the only infinite and accessible source of clean and green energy on our planet. In addition to the various solar energy production methods, a new paradigm for utilizing asphalt pavement as a solar collector is being developed for self-powered energy harvesting. Due to direct solar radiation, flexible paved surfaces exposed to direct sunlight can heat up to 70°C in the summer. The heat is then dissipated into the environment, causing the urban heat island effect, and accelerating thermal oxidation of asphalt pavement. This can lead to structural failure and reduced pavement performance. This study aims to present a state-of-the-art review of hydronic asphalt solar collectors (HASCs) and propose the best model to enhance the performance of asphalt solar collectors. The findings of the study concluded that asphalt has the potential to absorb solar energy and store heat energy. This can be achieved by assembling and modifying conventional asphalt structures into modern asphalt solar collector designs that consist of pipe arrangements below the paved surface filled with liquid flowing through the pavement surface. The study found that a significant limitation of previous research was that it focused on optimizing the temperature profile at various depths but did not focus on structural improvements to reduce failure and increase the performance of asphalt solar collectors. Therefore, this review study proposed a new technique of using conductive and waste materials to enhance the performance of asphalt solar collectors.
- 4 January 2024
- Published by Springer Nature
- p. 209-220
Thermo-Mechanical Properties of Concrete Mortar with Cenosphere
- 4 January 2024
- Published by Springer Nature
- p. 209-220
Thermo-Mechanical Properties of Concrete Mortar with Cenosphere
- Open Access
- 16 June 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-12
Strength enhancement of concrete using incinerated agricultural waste as supplementary cement materials
The potassium (K) and sodium (Na) elements in banana are needed for hydration reaction that can enhance the strength properties of concrete. This research aims (a) to determine the material engineering properties of banana skin ash (BSA) and concrete containing BSA, (b) to measure the strength enhancement of concrete due to BSA, and (c) to identify optimal application of BSA as supplementary cement materials (SCM) in concrete. The BSA characterization were assessed through X-ray fluorescence (XRF) and Blaine’s air permeability. The workability, compressive strength, and microstructures of concrete containing BSA were analysed using slump test, universal testing machine (UTM) and scanning electron microscope (SEM). A total of 15 oxides and 19 non-oxides elements were identified in BSA with K (43.1%) the highest and Na was not detected. At 20 g of mass, the BSA had a higher bulk density (198.43 ± 0.00 cm3) than ordinary Portland cement (OPC) (36.32 ± 0.00 cm3) indicating availability of large surface area for water absorption. The concrete workability was reduced with the presence of BSA (0% BSA: > 100 mm, 1% BSA: 19 ± 1.0 mm, 2%: 15 ± 0.0 mm, 3% BSA: 10 ± 0.0 mm). The compressive strength increased with the number of curing days. The concrete microstructures were improved; interfacial transition zones (ITZ) decreased with an increase of BSA. The optimal percentage of BSA obtained was at 1.25%. The established model showed significant model terms (Sum of Squares = 260.60, F value = 69.84) with probability of 0.01% for the F-value to occur due to noise. The established model is useful for application in construction industries.
- 16 June 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-12
Open AccessStrength enhancement of concrete using incinerated agricultural waste as supplementary cement materials
The potassium (K) and sodium (Na) elements in banana are needed for hydration reaction that can enhance the strength properties of concrete. This research aims (a) to determine the material engineering properties of banana skin ash (BSA) and concrete containing BSA, (b) to measure the strength enhancement of concrete due to BSA, and (c) to identify optimal application of BSA as supplementary cement materials (SCM) in concrete. The BSA characterization were assessed through X-ray fluorescence (XRF) and Blaine’s air permeability. The workability, compressive strength, and microstructures of concrete containing BSA were analysed using slump test, universal testing machine (UTM) and scanning electron microscope (SEM). A total of 15 oxides and 19 non-oxides elements were identified in BSA with K (43.1%) the highest and Na was not detected. At 20 g of mass, the BSA had a higher bulk density (198.43 ± 0.00 cm3) than ordinary Portland cement (OPC) (36.32 ± 0.00 cm3) indicating availability of large surface area for water absorption. The concrete workability was reduced with the presence of BSA (0% BSA: > 100 mm, 1% BSA: 19 ± 1.0 mm, 2%: 15 ± 0.0 mm, 3% BSA: 10 ± 0.0 mm). The compressive strength increased with the number of curing days. The concrete microstructures were improved; interfacial transition zones (ITZ) decreased with an increase of BSA. The optimal percentage of BSA obtained was at 1.25%. The established model showed significant model terms (Sum of Squares = 260.60, F value = 69.84) with probability of 0.01% for the F-value to occur due to noise. The established model is useful for application in construction industries.