ZLZhi Li

Zhi Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhi Li has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A DAS-Based Multi-Sensor Fusion Framework for Feature Extraction and Quantitative Blockage Monitoring in Coal Gangue Slurry Pipelines

    by Chenyang Ma, Jing Chai, Dingding Zhang, Lei Zhu, Zhi Li

    Long-distance coal gangue slurry transportation pipelines are critical components of underground coal mine green backfilling systems, yet blockage failures severely threaten their safe and efficient operation. Existing distributed acoustic sensing (DAS)-based monitoring methods for such pipelines suffer from three key limitations: insufficient fixed-point quantitative accuracy, lack of verified blockage-specific characteristic indicators, and limited quantitative severity assessment capability. To address these gaps, this paper proposes a novel feature-level fusion monitoring method integrating DAS, fiber Bragg grating (FBG), and piezoelectric accelerometers for accurate blockage identification and quantitative evaluation in coal gangue slurry pipelines. A slurry pipeline circulation test platform with gradient blockage simulation (0% to 76.42%) and a synchronous multi-sensor monitoring system were developed. Through multi-domain signal analysis, three blockage-correlated characteristic frequencies were identified and cross-validated by synchronous multi-sensor data: 1.5 Hz (system background vibration), 26 Hz (blockage-induced fluid–structure resonance, verified by the Euler–Bernoulli beam theory with a theoretical value of 25.7 Hz), and 174 Hz (transient flow impact). The DAS phase change rate exhibited a unimodal nonlinear response to blockage degree, with the peak occurring at 40.94% blockage. On this basis, a sine-fitting quantitative inversion model was developed, achieving a high goodness of fit (R2 = 0.985), and leave-one-out cross-validation confirmed its excellent robustness with a mean relative prediction error of 3.77%. Finally, a collaborative monitoring framework was built to fully leverage the complementary advantages of each sensor, realizing full-process blockage monitoring covering global blockage localization, precise quantitative severity calibration, and high-frequency transient risk early warning. The proposed method provides a robust experimental and technical foundation for real-time early warning, precise localization, and quantitative diagnosis of long-distance slurry pipeline blockages and holds important engineering application value for the safe and efficient operation of underground coal mine green backfilling systems.


  • Open Access

    CFD Numerical Simulation of Slurry Flow Characteristics Under the Clogged Form of Coal Gangue Slurry Transportation Pipeline

    by Lei Zhu, Zhi Li, Yuyi Wu, Chengyong Liu, Dingding Zhang, Jing Chai, Wenzhe Gu, Ziwei Ding, Lei Gao, Fengqi Qiu, et al.

    Slurry filling technology has been increasingly adopted in coal mines in the northwest region. However, due to the complexity of slurry transport pipelines, blockages remain a frequent issue. These blockages can reduce operational efficiency, with different blockage types causing varying levels of damage. Despite the significance of this issue, there is limited in-depth analysis in the literature, especially regarding the role of pressure in pipeline blockages. This study utilizes FLUENT 2020R2 (the fluid simulation software) for computational fluid dynamics simulations of slurry pipeline blockages, focusing on the impact of blockage morphology, location, and extent on slurry transport pressure distribution. The results indicate that the greater the blockage extent, the more pronounced the pressure loss along the pipeline. Furthermore, blockage morphology also has a varying effect on pressure drop. At lower blockage levels, the pressure drop variation across the three blockage types is relatively minor. However, when the blockage exceeds 50%, sedimentation-type blockages (B-blockage) cause the most significant harm. The study identifies the underlying causes of this and provides recommendations to mitigate sedimentation-type blockages. Within 1 m downstream of the blockage, the flow velocity rapidly decreases to near zero, creating a stagnant zone that accelerates the deposition of gangue particles, thereby worsening the blockage. After a sudden blockage, the location of the blockage has minimal impact on pressure drop. The influence on slurry pressure is ranked as follows: sedimentation-type blockage (B-blockage) > composite blockage (C-blockage) > attachment-type blockage (A-blockage).


  • Open Access

    CFD Numerical Simulation of Slurry Flow Characteristics Under the Clogged Form of Coal Gangue Slurry Transportation Pipeline

    by Lei Zhu, Zhi Li, Yuyi Wu, Chengyong Liu, Dingding Zhang, Jing Chai, Wenzhe Gu, Ziwei Ding, Lei Gao, Fengqi Qiu, et al.

    Slurry filling technology has gradually been adopted in coal mines in the northwest region. However, due to the complexity of slurry transport pipelines, blockages remain a frequent issue. Pipeline blockages can adversely impact production, reducing operational efficiency, with different blockage types causing varying degrees of harm. Despite the significance of this issue, there is limited in-depth analysis in the literature, especially regarding the role of pressure in pipeline blockages. This study utilizes FLUENT software for computational fluid dynamics (CFD) simulations of slurry pipeline blockages, focusing on the impact of blockage morphology, location, and extent on slurry transport pressure distribution. The results indicate that the greater the blockage extent, the more pronounced the pressure loss along the pipeline. Furthermore, blockage morphology also has a varying effect on pressure drop. At lower blockage levels, the pressure drop variation across the three blockage types is relatively minor. However, when the blockage exceeds 50%, sedimentation-type blockages cause the most significant harm. The study analyzes the reasons behind this and offers recommendations to mitigate sedimentation-type blockages. Within 1 meter downstream of the blockage, the flow velocity rapidly decreases to near zero, creating a stagnant zone that accelerates the deposition of gangue particles, thereby worsening the blockage. After an instantaneous blockage occurs, the location of the blockage has little effect on the pipeline's pressure drop. Among the three blockage types, the impact on slurry pressure in the pipeline is ranked as follows: sedimentation-type blockage > composite blockage > attachment-type blockage.

  • Open Access

    FBG and BOTDA Based Monitoring of Mine Pressure Under Remaining Coal Pillars Using Physical Modeling

    by Dingding Zhang, Zhi Li, Yanyan Duan, Long Yang, Hongrui Liu

    Strong mine pressure often emerges when the working face of the lower coal seam in a closely spaced coal seam system passes through the remaining coal pillar in the overlying goaf. This study investigates the law of overburden movement and the manifestation of mine pressure during mining under the remaining coal pillar. A physical model measuring 2.5 × 0.2 × 1.503 m is constructed. Fiber Bragg grating sensing technology (FBG) and Brillouin optical time domain analysis technology (BOTDA) are employed in the physical model experiment to monitor the internal strain of the overlying rock as the working face advances. This study determines the laws of overlying rock fracture and working face pressure while mining coal seams beneath the remaining coal pillar. It analyzes the relationship between the pressure at the working face and the strain characteristics of the horizontally distributed optical fiber. A fiber grating characterization method is established for the stress evolution law of overlying rock while passing the remaining coal pillar. The experimental results indicated that the fracture angle of overlying rock gradually decreases during the mining stage through and after the coal pillar. In the mining stage through the coal pillar, the cycle pressure step distance of the working face is reduced by 33.3% compared to the stage after mining through the coal pillar. Initially, the strain pattern of the horizontal optical fiber is unimodal when pressure is first applied to the working face, and it transitions from unimodal to bimodal during periodic pressure. The peak value of fiber Bragg grating compressive strain and the range of influence of advanced support pressure are 3.6 times and 4.8 times, respectively, before passing through the remaining coal pillar. Finally, the accuracy of the FBG characterization method is verified by comparing it to the monitoring curve of the coal seam floor pressure sensor. The research results contribute to applying fiber optic sensing technology in mining physical model experiments.


  • Top Cited Papers
    Open Access

    Overview of Health-Monitoring Technology for Long-Distance Transportation Pipeline and Progress in DAS Technology Application

    by Yuyi Wu, Lei Gao, Jing Chai, Zhi Li, Chenyang Ma, Fengqi Qiu, Qiang Yuan, Dingding Zhang

    There are various health issues associated with the different stages of long-distance pipeline transportation. These issues pose potential risks to environmental pollution, resource waste, and the safety of human life and property. It is essential to have real-time knowledge of the overall health status of pipelines throughout their entire lifecycle. This article investigates various health-monitoring technologies for long-distance pipelines, providing references for addressing potential safety issues that may arise during long-term transportation. This review summarizes the factors and characteristics that affect pipeline health from the perspective of pipeline structure health. It introduces the principles of major pipeline health-monitoring technologies and their respective advantages and disadvantages. The review also focuses on the application of Distributed Acoustic Sensing (DAS) technology, specifically time and space continuous monitoring technology, in the field of pipeline structure health monitoring. This paper discusses the process of commercialization development of DAS technology, the main research progress in the experimental field, and the open research issues. DAS technology has broad application prospects in the field of long-distance transportation pipeline health monitoring.