Denis A. Zadkov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Denis A. Zadkov has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- A. Yu. Kuzkin
Empress Catherine II St Petersburg Min Univ, Dept Mech Engn, St Petersburg, Russia
1 shared publication - Aleksey A. Petrovskiy
Laboratory of Geochemistry of Ore Formation and Geochemical methods of Prospecting, A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences, 664033 Irkutsk, Russia
1 shared publication - Alexander V. Pogrebnoy
Department of Information Technology, Tomsk Polytechnic University, 634050 Tomsk, Russia
1 shared publication - Anton Y. Demin
Department of Information Technology, Tomsk Polytechnic University, 634050 Tomsk, Russia
1 shared publication - Boris V. Malozyomov
Department of Electrotechnical Complexes, Novosibirsk State Technical University, 20, Karla Marksa Ave., 630073 Novosibirsk, Russia
1 shared publication - Denis V. Valuev
Yurga Technological Institute (Branch), Tomsk Polytechnic University, 652055 Yurga, Russia
1 shared publication
Latest Publications
- Open Access
- 18 February 2026
- Published by MDPI AG in Mathematics
- Vol. 14 (4) , 716
Mathematical Modeling of Operational Reliability of Mine Lifting Equipment Based on Censored Data
In this study, a comprehensive mathematical method for modeling the operational reliability of mine hoisting equipment under conditions of incomplete and heavily censored data is developed. The analyzed dataset includes 259 observations collected over a five-year period for six critical components, with the overall level of censoring reaching 62% and exceeding 70% for long life mechanical subsystems. Considering right, left, and interval censoring, the paper proposes a unified statistical procedure that combines empirical estimation of failure rates with parametric identification using Weibull, exponential, normal, and lognormal distributions. Model parameters are estimated using censored data–aware fitting procedures, while model selection is performed based on likelihood-based criteria, supplemented by correlation analysis to assess agreement between empirical and fitted reliability curves. The methodology is implemented computationally in the Mathcad Prime environment and is supplemented with mathematical tools for reconstructing survival curves, analyzing parameter sensitivity, and evaluating robustness at different censoring levels. In addition, an economic optimization model is formulated to determine cost-effective maintenance intervals by minimizing an integral functional that accounts for preventive maintenance, repair, and downtime costs. The results demonstrate that the proposed approach provides stable reliability estimates and reliable forecast intervals, enabling the construction of generalized life cycle curves for individual subsystems. The study establishes a rigorous mathematical basis for the transition from fixed-interval maintenance to adaptive, reliability-oriented maintenance strategies in industrial mine hoisting systems.
- 18 February 2026
- Published by MDPI AG in Mathematics
- Vol. 14 (4) , 716
Open AccessMathematical Modeling of Operational Reliability of Mine Lifting Equipment Based on Censored Data
In this study, a comprehensive mathematical method for modeling the operational reliability of mine hoisting equipment under conditions of incomplete and heavily censored data is developed. The analyzed dataset includes 259 observations collected over a five-year period for six critical components, with the overall level of censoring reaching 62% and exceeding 70% for long life mechanical subsystems. Considering right, left, and interval censoring, the paper proposes a unified statistical procedure that combines empirical estimation of failure rates with parametric identification using Weibull, exponential, normal, and lognormal distributions. Model parameters are estimated using censored data–aware fitting procedures, while model selection is performed based on likelihood-based criteria, supplemented by correlation analysis to assess agreement between empirical and fitted reliability curves. The methodology is implemented computationally in the Mathcad Prime environment and is supplemented with mathematical tools for reconstructing survival curves, analyzing parameter sensitivity, and evaluating robustness at different censoring levels. In addition, an economic optimization model is formulated to determine cost-effective maintenance intervals by minimizing an integral functional that accounts for preventive maintenance, repair, and downtime costs. The results demonstrate that the proposed approach provides stable reliability estimates and reliable forecast intervals, enabling the construction of generalized life cycle curves for individual subsystems. The study establishes a rigorous mathematical basis for the transition from fixed-interval maintenance to adaptive, reliability-oriented maintenance strategies in industrial mine hoisting systems.
- 30 June 2024
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 27, 71-77
Viscoplastic properties of chromium-nickel steel in short-term creep under constant stress. Part 1
Mechanical processing of Chromium-nickel steel machining (cutting, pressure treatment) is impossible without taking into account their short-term creep and ductility properties. The purpose of this work is to study the formation and deformation development under short-term creep and constant effective stresses. The results of experimental tests of chromium-nickel steel 12Kh18N10Т for short-term creep at room temperature are presented. A distinctive feature of the tests is the short-term creep in a wide range of stresses study: from the initial creep limit to the material destruction. The experiments were carried out under conditions of a stepwise increasing load (liquid pressure in a closed pipe) at a constant intensity of true stresses at each stage. It is shown that the conditions for changing the load, which ensure the constancy of the stress intensity, are violated at a sufficiently high voltage. Methods for separating the deformation into a plastic component and a component from short-term creep are proposed, which can be used both under conditions of stepped loading and under continuous loading. Examples of the occurrence and deformation development during short-term creep under conditions of decreasing stress are given.
- 30 June 2024
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 27, 71-77
Viscoplastic properties of chromium-nickel steel in short-term creep under constant stress. Part 1
Mechanical processing of Chromium-nickel steel machining (cutting, pressure treatment) is impossible without taking into account their short-term creep and ductility properties. The purpose of this work is to study the formation and deformation development under short-term creep and constant effective stresses. The results of experimental tests of chromium-nickel steel 12Kh18N10Т for short-term creep at room temperature are presented. A distinctive feature of the tests is the short-term creep in a wide range of stresses study: from the initial creep limit to the material destruction. The experiments were carried out under conditions of a stepwise increasing load (liquid pressure in a closed pipe) at a constant intensity of true stresses at each stage. It is shown that the conditions for changing the load, which ensure the constancy of the stress intensity, are violated at a sufficiently high voltage. Methods for separating the deformation into a plastic component and a component from short-term creep are proposed, which can be used both under conditions of stepped loading and under continuous loading. Examples of the occurrence and deformation development during short-term creep under conditions of decreasing stress are given.
- Open Access
Studying the Flotation of Gold-Bearing Ores Using Carrier Minerals
This work is aimed at the analysis of the development of flotation technology by applying carrier minerals. Based on the concepts of continuum mechanics, a theoretical analysis of the influence of the carrier minerals (wall) on the motion of a single solid particle is provided, taking into account their hydrodynamic interaction (in the case of low Reynolds numbers). A correction was obtained in the form of a ratio of the particle size to its distance from the wall to take into account the influence of the wall on the hydrodynamic force acting on the particle. The influence of the wall is manifested through a rapid approximation of the liquid vortex flow in the gap between the solid wall and the particle to the steady-state mode, accompanied by the suppression of the transverse movement of particles. When the liquid slides along a wall-mounted gas–liquid layer with a reduced viscosity, the liquid flow increases in the interfacial gap, which can be analyzed by a dimensionless correction that includes values describing the properties of a continuous medium (dynamic viscosity) and a disperse phase (geometric particle size). The reason for the decrease in the induction time when gold grains adhere to each other is assumed to be due to the forces of hydrophobic attraction (when the grains have a mirror-smooth surface) and the sliding of the flow along the hydrophobic surface of the particles along the gas layer (when the grains have a rough surface). When polydisperse particles are aggregated, the threshold energy of the fast coagulation was established to be lower than that arising during the interaction of monodisperse particles, whose aggregation requires a large depth of the potential pit. Performing natural experiments on the ore using a rougher concentrate as a carrier material showed that the concentrate yield decreases by 20.52% rel. In the second case, the gold extraction was higher by 4.69% abs. While maintaining the achieved level of gold extraction, the double mixing of the rougher concentrate and the initial feed increased the gold content in the rougher concentrate from 4.97 to 6.29 g/t.
Open AccessStudying the Flotation of Gold-Bearing Ores Using Carrier Minerals
This work is aimed at the analysis of the development of flotation technology by applying carrier minerals. Based on the concepts of continuum mechanics, a theoretical analysis of the influence of the carrier minerals (wall) on the motion of a single solid particle is provided, taking into account their hydrodynamic interaction (in the case of low Reynolds numbers). A correction was obtained in the form of a ratio of the particle size to its distance from the wall to take into account the influence of the wall on the hydrodynamic force acting on the particle. The influence of the wall is manifested through a rapid approximation of the liquid vortex flow in the gap between the solid wall and the particle to the steady-state mode, accompanied by the suppression of the transverse movement of particles. When the liquid slides along a wall-mounted gas–liquid layer with a reduced viscosity, the liquid flow increases in the interfacial gap, which can be analyzed by a dimensionless correction that includes values describing the properties of a continuous medium (dynamic viscosity) and a disperse phase (geometric particle size). The reason for the decrease in the induction time when gold grains adhere to each other is assumed to be due to the forces of hydrophobic attraction (when the grains have a mirror-smooth surface) and the sliding of the flow along the hydrophobic surface of the particles along the gas layer (when the grains have a rough surface). When polydisperse particles are aggregated, the threshold energy of the fast coagulation was established to be lower than that arising during the interaction of monodisperse particles, whose aggregation requires a large depth of the potential pit. Performing natural experiments on the ore using a rougher concentrate as a carrier material showed that the concentrate yield decreases by 20.52% rel. In the second case, the gold extraction was higher by 4.69% abs. While maintaining the achieved level of gold extraction, the double mixing of the rougher concentrate and the initial feed increased the gold content in the rougher concentrate from 4.97 to 6.29 g/t.