GCGabriele Colombo

Gabriele Colombo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gabriele Colombo has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical modelling of current non-uniformity in braided stacks of tapes

    by Wenzhe Hong, Gianluca De Marzi, Zhou Chao, Gabriele Colombo, Huan Jin, Fang Liu, Huajun Liu, Andrea Masi, Luigi Muzzi, Jinggang Qin

    The performance of REBCO multi-stack cables is crucial for next-generation high-field fusion magnets, it is often limited by uneven current distribution. This study employs a 3D finite-element model based on the weak form of the H -formulation to analyze current non-uniformity within a novel BRAided Stacks of Tapes (BRAST) assembly. The model rigorously accounts for the nonlinear E – J power law of the REBCO material, as well as the effects of inter-tape and terminal resistances. The model’s accuracy is verified experimentally. Simulation results establish a clear hierarchy of stability drivers. First, non-uniform terminal resistance determines the inter- tape current imbalance. Low inter-tape contact resistance has a dual role: it amplifies short-range current imbalances at the cable entry point, leading to increased local current loading, while simultaneously promoting a more uniform longitudinal current distribution within the cable, thereby mitigating current inhomogeneity. Furthermore, the analysis reveals that tape regions with reduced critical current can be the onset of overall stack transition, and that the overall stability of the cable is determined by the minimum current-carrying capacity within the tape stack. This study provides quantitative guidance for controlling terminal resistance uniformity and optimizing contact resistance, thereby improving the stability and robustness of BRAST and similar multi- tape superconducting cable systems.

  • Open Access

    Measurements of Quench Propagation Velocity in HTS Cable for Fusion Applications Using Optical Fiber Sensors

    by M. De Stasio, G. Colombo, A. Masi, M. Breschi, M. A. Caponero, G. Celentano, M. Marchetti, L. Muzzi, A. Polimadei, A. Trotta, et al.

    Low quench propagation velocity (QPV) in high-temperature superconductors (HTS) undermines conventional voltage-based quench detection, since damaging temperatures can develop locally before appreciable voltages appear. This work investigates an ENEA aluminum slotted-core cable featuring a BRAided STack (BRAST) of REBCO tapes, instrumented with capillary-mounted fiber Bragg gratings (FBGs) in direct thermal contact with the stack, alongside conventional voltage taps. Quench experiments were carried out in liquid nitrogen flow at 77 K, with the current held constant at about 500 A. Electrical and optical signals were processed with a standardized pipeline for the onset quench: statistical thresholds for electric field, and temperature-based arrivals at FBGs. From arrival times at known positions, QPV is estimated via two independent methods based on resistive front and thermal front, respectively. Both methods yield consistent values in the range of 20–60 mm/s. Downstream, where the front is fully developed, the two estimates converge within uncertainty. These results demonstrate that embedded optical fibers provide local temperature tracking, electromagnetically immune, and minimally invasive complement to voltage taps for quench detection and QPV estimation in HTS cables for fusion-magnet applications.


  • Development Status of the HTS SECAS Conductor for a Full-Size Test Sample

    by L. Muzzi, M. Bombardieri, E. Cacciotti, G. Celentano, S. Chiarelli, G. Colombo, V. Corato, A. della Corte, G. De Marzi, A. Di Zenobio, et al.

    The ENEA Superconductivity Laboratory, in collaboration with the industrial partner TRATOS Cavi, is continuing the development activity of the high-current / high-field SECAS Cable-in-Conduit conductor, based on stacked REBCO tapes and a segmented, sector-shaped Cu former. The test outcome of various prototypes, carried out at 77 K and self-field in the previous years, have clarified important aspects of the manufacturing process and cable performance, and identified the key aspects of the processing steps. The industrial manufacturing process is consequently being developed, and partly applied for the manufacture of full-size samples, to be tested in the SULTAN facility. The conductor is designed to operate at 4.5 K, with a current of 60 kA and at a field of 18 T (as required by the EUROFusion DEMO development plan). Different layouts have been probed, either based on 4 mm-wide, or on 12 mm-wide tapes, but maintaining the same total superconductor cross-section, to verify the impact on AC losses and on tape mechanics. Two of these layouts are being assembled into a single SULTAN sample, made of two legs connected by a bottom joint. The sample will also be equipped with fiber optic sensors, to demonstrate quench detection capabilities. The main results of the development activities, based so far on tests carried out at 77 K and self-field of short cable lengths, are presented and commented in this work.


  • High Spatial Resolution Distributed Brillouin Measurements at Cryogenic Temperatures

    by Raffaele Vallifuoco, Ester Catalano, Gabriele Colombo, Gianluca De Marzi, Michele Arturo Caponero, Andrea Masi, Luigi Zeni, Aldo Minardo

    Distributed optical fiber sensors are promising tools for quench detection and protection in superconductor-based magnet systems, as they provide continuous monitoring of the temperature at any location within a magnet with high spatial resolution and immunity to electromagnetic interference. Conventional distributed sensors based on Brillouin scattering, however, fails in reaching adequate performance for quench detection due to limited spatial resolution and/or acquisition rate. In this work, we demonstrate the use of a high-spatial resolution Brillouin Optical Frequency-Domain analysis (BOFDA) system to perform distributed temperature measurements at cryogenic temperatures. A custom-made BOFDA prototype was employed to characterize the Brillouin gain spectrum (BGS) in a standard single-mode fiber, at a temperature ranging from ≈ 260 K down to ≈ 2.6 K. A novel algorithm was devised to extract the temperature from BGS measurements at cryogenic temperatures. Finally, the large increase in the Brillouin gain coefficient at temperatures below ≈ 10 K was exploited to realize slope-assisted BOFDA measurements with a temperature sensitivity less than 0.1 K, a spatial resolution of 3 cm, and an acquisition rate of 1.75 Hz.


  • Comparative Study on Distributed Fiber Optic–Based Quench Detection Schemes for HTS Cables for Fusion Magnets

    by Gabriele Colombo, Andrea Masi, Marco Breschi, Michele A. Caponero, Giuseppe Celentano, Marcello Marchetti, Luigi Muzzi, Andrea Polimadei, Laura Savoldi, Sofia Viarengo, et al.

    Distributed Fiber Optic Sensors (DFOS) are being considered as an alternative solution for Quench Detection in HTS fusion magnets. Their successful application is not straightforward due to the simultaneous need for high spatial and temporal resolution over long-length conductors operating in demanding cryogenic environments. In this work, we explore the potential of two different commercially available distributed sensing technologies, respectively based on the analysis of Rayleigh-backscattering through Optical Time Domain Reflectometry (OTDR) and Optical Frequency Domain Reflectometry (OFDR). The two techniques were used first to characterize the cryogenic temperature response of similar fibers between room temperature and 4 K. The temperature sensitivities were computed and compared to those of Fiber Bragg Grating sensors, showing comparable results. The performance of the investigated techniques in detecting local quenches was then experimentally assessed in operating conditions on a 2-meter-long, aluminum-stabilized HTS sample cooled by Liquid Nitrogen flow. While OFDR needs improvements in temporal resolution, the limited scale of the hot spot represents a challenge for the OTDR technique due to its lower spatial resolution.


  • Modeling of Quench in a Slotted Core HTS Cable for Compact Fusion Reactors

    by Lorenzo Cavallucci, Gabriele Colombo, Gianluca De Marzi, Antonio Trotta, Fabio Zanon, Marco Breschi

    In this work, a 3D FEM electro-thermal model of a slotted core HTS cable, developed at the ENEA Frascati Superconductivity Laboratory (Italy) in collaboration with the University of Bologna (Italy) and Eni S.p.A. (Italy), is presented. A benchmark of the model with experimental tests is provided, showing the temporal evolution of voltages and temperatures (monitored through fibre optic sensors) during quench. The model is also applied to compute the normal zone propagation velocity. The analysis finally provides critical information for the design of a quench protection system based on fiber optics.


  • Fiber-Optics Quench Detection Schemes in HTS Cables for Fusion Magnets

    by Gabriele Colombo, Sayyed Ashkan Adibi, Marco Breschi, Michele A. Caponero, Antonio Castaldo, Giuseppe Celentano, Antonio della Corte, Marcello Marchetti, Andrea Masi, Cristina Mazzotta, et al.

    In this article, we report the results from two test campaigns conducted to evaluate the feasibility of implementing a commercially available optical fiber-based distributed sensing technology for Quench Detection (QD) purposes. We successfully characterized the temperature response and sensitivity achievable by this technique when using a bare single mode fiber within a cryogen free cooling system operating in the temperature range from 4 K to 300 K. A fiber was also incorporated into a sample featuring an High-Temperature Superconductor (HTS) stack mounted onto an extruded Aluminum slotted-core cable. Quench-like events were triggered by locally lowering the critical current using the magnetic field produced by a set of permanent magnets placed near the center of the stack. The experiments were carried out at 77 K by cooling the sample through the central channel of the Aluminum core with a forced flow of liquid nitrogen. The test results indicate the viability of this technology as a suitable alternative for QD in long-length HTS cables and motivate further work to develop distributed sensing systems able to work in the conditions foreseen for HTS fusion coils.


  • A Study on Quench Detection for Cable-in-Conduit Conductors With Co-Wound Tapes

    by Gabriele Colombo, Pierre Bauer, Marco Breschi, Nicolai Martovetsky

    The primary Quench Detection System (QDS) of the Central Solenoid (CS) of the ITER magnet system must be able to distinguish the resistive component of the voltage, arising during quench, from the inductive one due to time-varying magnetic fluxes. This task is especially challenging for the six modules composing the CS (CSMs), with a coil self-inductance of the order of ∼1 H, subjected to current ramps up to ∼10 kA/s. Each CSM is equipped with stainless-steel tapes wrapped around the outer conduit of the conductor, referred to as Co-Wound Tapes (CWTs), linked to a magnetic flux approximating the one linked to the conductor itself. This work focuses on the definition of a model able to compute the voltages measured by the QDS with the high precision required. The analysis is based on a 2D axisymmetric FEM model of the entire CSM in a stand-alone configuration. A novel 3D approach based on an integral computation method allows one to account for the twisting of the conductor sub-cables of the last cabling stage (petals). The model is applied to quantify the impact of three main error sources contributing to the residual voltage signal measured by the QDS: the difference in self-field flux linked to the conductor and to the CWT, the inhomogeneity of the background field and the twisting of the petals.


  • Multi-Sensor Quench Detection System for an HTS Slotted Superconducting Cable

    by S. A. Adibi, G. Colombo, M. Breschi, M. A. Caponero, A. Castaldo, G. Celentano, M. Marchetti, A. Masi, C. Mazzotta, A. Polimadei, et al.

    Quench caused by electromechanical instabilities is a major concern in high-temperature superconducting (HTS) magnets, and quench detection methods, alternative to common voltage-based systems, are currently under study. In this work, we describe the experimental design and set-up, and we report the results of studies carried out on a cable equipped with bismuth strontium calcium copper oxide (BSCCO) tapes. The sample layout comprises an aluminum slotted core, cooled via a forced flow of liquid nitrogen in the central channel, and liquid nitrogen cooled termination. To trigger a quench in a well-defined position within the stack, a localized small magnetic field is employed to reduce the critical current density in the central zone of the cable. Various configuration of sensors including temperature sensors, voltage taps, and fiber Bragg grating (FBG) are installed, with the final aim of developing a fast and reliable quench detection set-up for the stacked-tapes HTS cable. It is shown that the response for both temperature and FBG signals are comparable for what concerns sensitivity and velocity, and both follow the voltage evolution in time. All in all, the developed setup with the multi-sensor allowed characterizing the electrical and thermal aspects of an HTS slotted-core superconducting cable during a localized magneto-thermal quench.